Re: [PATCH] dt-bindings: usb: add properties for hard wired devices

Rob Herring
2020-09-28T18:13:30Z

On Mon, 28 Sep 2020 14:39:50 +0800, Chunfeng Yun wrote:
> Add some optional properties which are needed for hard wired devices
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> Documentation/devicetree/bindings/usb/usb-hcd.yaml | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>

My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml: usb@a6f8800: #address-cells:0:0: 1 was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml: usb@a6f8800: #size-cells:0:0: 0 was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.example.dt.yaml: usb@ffe09000: #size-cells:0:0: 0 was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.example.dt.yaml: usb-glue@65b00000: #size-cells:0:0: 0 was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.example.dt.yaml: usb-glue@65b00000: #size-cells:0:0: 0 was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml

See https://patchwork.ozlabs.org/patch/1372394

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.