From: justinpopo6@gmail.com
To: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
linux-usb@vger.kernel.org, jannh@google.com,
jackychou@asix.com.tw, jesionowskigreg@gmail.com,
joalonsof@gmail.com, justinpopo6@gmail.com, pabeni@redhat.com,
kuba@kernel.org, edumazet@google.com, davem@davemloft.net,
f.fainelli@gmail.com
Cc: justin.chen@broadcom.com
Subject: [PATCH 5/5] net: usb: ax88179_178a: wol optimizations
Date: Mon, 18 Jul 2022 16:58:09 -0700 [thread overview]
Message-ID: <1658188689-30846-6-git-send-email-justinpopo6@gmail.com> (raw)
In-Reply-To: <1658188689-30846-1-git-send-email-justinpopo6@gmail.com>
From: Justin Chen <justinpopo6@gmail.com>
- Check if wol is supported on reset instead of everytime get_wol
is called.
- Save wolopts in private data instead of relying on the HW to save it.
- Defer enabling WoL until suspend instead of enabling it everytime
set_wol is called.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
---
drivers/net/usb/ax88179_178a.c | 52 +++++++++++++++++++++++-------------------
1 file changed, 28 insertions(+), 24 deletions(-)
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index cb7b89f..757c1d9b 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -171,6 +171,8 @@ struct ax88179_data {
u8 eee_active;
u16 rxctl;
u8 in_pm;
+ u32 wol_supported;
+ u32 wolopts;
};
struct ax88179_int_data {
@@ -400,6 +402,7 @@ ax88179_phy_write_mmd_indirect(struct usbnet *dev, u16 prtad, u16 devad,
static int ax88179_suspend(struct usb_interface *intf, pm_message_t message)
{
struct usbnet *dev = usb_get_intfdata(intf);
+ struct ax88179_data *priv = dev->driver_priv;
u16 tmp16;
u8 tmp8;
@@ -407,6 +410,19 @@ static int ax88179_suspend(struct usb_interface *intf, pm_message_t message)
usbnet_suspend(intf, message);
+ /* Enable WoL */
+ if (priv->wolopts) {
+ ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
+ 1, 1, &tmp8);
+ if (priv->wolopts & WAKE_PHY)
+ tmp8 |= AX_MONITOR_MODE_RWLC;
+ if (priv->wolopts & WAKE_MAGIC)
+ tmp8 |= AX_MONITOR_MODE_RWMP;
+
+ ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
+ 1, 1, &tmp8);
+ }
+
/* Disable RX path */
ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
2, 2, &tmp16);
@@ -480,40 +496,22 @@ static void
ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
{
struct usbnet *dev = netdev_priv(net);
- u8 opt;
-
- if (ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
- 1, 1, &opt) < 0) {
- wolinfo->supported = 0;
- wolinfo->wolopts = 0;
- return;
- }
+ struct ax88179_data *priv = dev->driver_priv;
- wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
- wolinfo->wolopts = 0;
- if (opt & AX_MONITOR_MODE_RWLC)
- wolinfo->wolopts |= WAKE_PHY;
- if (opt & AX_MONITOR_MODE_RWMP)
- wolinfo->wolopts |= WAKE_MAGIC;
+ wolinfo->supported = priv->wol_supported;
+ wolinfo->wolopts = priv->wolopts;
}
static int
ax88179_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
{
struct usbnet *dev = netdev_priv(net);
- u8 opt = 0;
+ struct ax88179_data *priv = dev->driver_priv;
- if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+ if (wolinfo->wolopts & ~(priv->wol_supported))
return -EINVAL;
- if (wolinfo->wolopts & WAKE_PHY)
- opt |= AX_MONITOR_MODE_RWLC;
- if (wolinfo->wolopts & WAKE_MAGIC)
- opt |= AX_MONITOR_MODE_RWMP;
-
- if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
- 1, 1, &opt) < 0)
- return -EINVAL;
+ priv->wolopts = wolinfo->wolopts;
return 0;
}
@@ -1643,6 +1641,12 @@ static int ax88179_reset(struct usbnet *dev)
ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
2, 2, tmp16);
+ /* Check if WoL is supported */
+ ax179_data->wol_supported = 0;
+ if (ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
+ 1, 1, &tmp) > 0)
+ ax179_data->wol_supported = WAKE_MAGIC | WAKE_PHY;
+
ax88179_led_setting(dev);
ax179_data->eee_enabled = 0;
--
2.7.4
prev parent reply other threads:[~2022-07-18 23:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-18 23:58 [PATCH 0/5] net: usb: ax88179_178a: improvements and bug fixes justinpopo6
2022-07-18 23:58 ` [PATCH 1/5] net: usb: ax88179_178a: remove redundant init code justinpopo6
2022-07-19 20:41 ` Jakub Kicinski
2022-07-18 23:58 ` [PATCH 2/5] net: usb: ax88179_178a: clean up pm calls justinpopo6
2022-07-18 23:58 ` [PATCH 3/5] net: usb: ax88179_178a: restore state on resume justinpopo6
2022-07-18 23:58 ` [PATCH 4/5] net: usb: ax88179_178a: move priv to driver_priv justinpopo6
2022-07-19 17:38 ` Jose Alonso
2022-07-18 23:58 ` justinpopo6 [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1658188689-30846-6-git-send-email-justinpopo6@gmail.com \
--to=justinpopo6@gmail.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=jackychou@asix.com.tw \
--cc=jannh@google.com \
--cc=jesionowskigreg@gmail.com \
--cc=joalonsof@gmail.com \
--cc=justin.chen@broadcom.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox