Re: [PATCH v3 2/2] dt-bindings: usb: dwc3: Add Realtek DHC RTD SoC DWC3 USB

[Rob Herring <robh@kernel.org>]

On Thu, 10 Aug 2023 13:54:35 +0800, Stanley Chang wrote:
> Document the DWC3 USB bindings for Realtek SoCs.
> 
> Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
> ---
> v2 to v3 change:
>     Add description for reg
>     Remove property for realtek,unlink-usb3-port.
>     Remove property for realtek,disable-usb3-phy.
>     Use the maximum-speed instead of the above two properties.
> v1 to v2 change:
>     Revise the subject.
>     Rename the file.
>     Fix dtschema warnings.
>     Remove the property realtek,enable-l4icg.
>     Drop status.
> ---
>  .../bindings/usb/realtek,rtd-dwc3.yaml        | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/realtek,rtd-dwc3.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230810055440.3534-2-stanley_chang@realtek.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.