Re: [PATCH 3/7] dt-bindings: usb: add SpacemiT K1 DWC3 glue

["Rob Herring (Arm)" <robh@kernel.org>]

On Mon, 07 Apr 2025 20:38:48 +0800, Ze Huang wrote:
> Add support for SpacemiT DWC3 glue driver, which manages interrupt,
> reset and clock resource.
> 
> Signed-off-by: Ze Huang <huangze@whut.edu.cn>
> ---
>  .../devicetree/bindings/usb/spacemit,k1-dwc3.yaml  | 78 ++++++++++++++++++++++
>  1 file changed, 78 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/spacemit,k1-dwc3.example.dtb: usb@c0a00000 (spacemit,k1-dwc3): '#address-cells', '#size-cells' do not match any of the regexes: '^usb@', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/usb/spacemit,k1-dwc3.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/spacemit,k1-dwc3.example.dtb: usb@c0a00000 (spacemit,k1-dwc3): usb@0:reg: [[0, 0], [0, 65536]] is too long
	from schema $id: http://devicetree.org/schemas/usb/spacemit,k1-dwc3.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/spacemit,k1-dwc3.example.dtb: usb@0 (snps,dwc3): reg: [[0, 0], [0, 65536]] is too long
	from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250407-b4-k1-usb3-v3-2-v1-3-bf0bcc41c9ba@whut.edu.cn

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.