Re: [PATCH 1/2] dt-bindings: usb: qcom,snps-dwc3: Add support for firmware-managed resources

["Rob Herring (Arm)" <robh@kernel.org>]

On Thu, 27 Nov 2025 16:01:44 +0530, Sriram Dash wrote:
> On Qualcomm automotive SoC sa8255p, platform resources like clocks,
> interconnect, resets, regulators and GDSC are configured remotely by
> firmware.
> 
> PM OPP is used to abstract these resources in firmware and SCMI perf
> protocol is used to request resource operations by using runtime PM
> framework APIs such as pm_runtime_get/put_sync to signal firmware
> for managing resources accordingly for respective perf levels.
> 
> "qcom,snps-dwc3-fw-managed" compatible helps determine if
> the device's resources are managed by firmware.
> Additionally, it makes the power-domains property mandatory
> and excludes the clocks property for the controller.
> 
> Signed-off-by: Sriram Dash <sriram.dash@oss.qualcomm.com>
> ---
>  .../devicetree/bindings/usb/qcom,snps-dwc3.yaml    | 173 +++++++++++++--------
>  1 file changed, 111 insertions(+), 62 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dtb: usb@a6f8800 (qcom,sdm845-dwc3): #address-cells: 1 was expected
	from schema $id: http://devicetree.org/schemas/usb/qcom,snps-dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dtb: usb@a6f8800 (qcom,sdm845-dwc3): #size-cells: 0 was expected
	from schema $id: http://devicetree.org/schemas/usb/qcom,snps-dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dtb: usb@a6f8800 (qcom,sdm845-dwc3): interrupt-names:0: 'dwc_usb3' was expected
	from schema $id: http://devicetree.org/schemas/usb/qcom,snps-dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dtb: usb@a6f8800 (qcom,sdm845-dwc3): interrupt-names:1: 'pwr_event' was expected
	from schema $id: http://devicetree.org/schemas/usb/qcom,snps-dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dtb: usb@a6f8800 (qcom,sdm845-dwc3): interrupt-names:2: 'hs_phy_irq' was expected
	from schema $id: http://devicetree.org/schemas/usb/qcom,snps-dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dtb: usb@a6f8800 (qcom,sdm845-dwc3): interrupt-names:3: 'dp_hs_phy_irq' was expected
	from schema $id: http://devicetree.org/schemas/usb/qcom,snps-dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dtb: usb@a6f8800 (qcom,sdm845-dwc3): interrupt-names:4: 'dm_hs_phy_irq' was expected
	from schema $id: http://devicetree.org/schemas/usb/qcom,snps-dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dtb: usb@a6f8800 (qcom,sdm845-dwc3): compatible: 'oneOf' conditional failed, one must be fixed:
	'qcom,sdm845-dwc3' is not one of ['qcom,sa8255p-dwc3']
	'qcom,snps-dwc3' was expected
	'qcom,snps-dwc3-fw-managed' was expected
	from schema $id: http://devicetree.org/schemas/usb/qcom,snps-dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dtb: usb@a6f8800 (qcom,sdm845-dwc3): Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'ranges', 'usb@a600000' were unexpected)
	from schema $id: http://devicetree.org/schemas/usb/qcom,snps-dwc3.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251127-controller_scmi_upstream-v1-1-38bcca513c28@oss.qualcomm.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.