From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mathias Nyman <mathias.nyman@intel.com>,
linux-usb@vger.kernel.org
Cc: "Jason Cooper" <jason@lakedaemon.net>,
"Andrew Lunn" <andrew@lunn.ch>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
linux-arm-kernel@lists.infradead.org,
"Antoine Tenart" <antoine.tenart@bootlin.com>,
"Miquèl Raynal" <miquel.raynal@bootlin.com>,
"Nadav Haklai" <nadavh@marvell.com>,
"Shadi Ammouri" <shadi@marvell.com>,
"Omri Itach" <omrii@marvell.com>,
"Hanna Hawa" <hannah@marvell.com>,
"Igal Liberman" <igall@marvell.com>,
"Marcin Wojtas" <mw@semihalf.com>
Subject: [2/2] usb: host: xhci-plat: Fix clock resource by adding a register clock
Date: Wed, 14 Feb 2018 17:16:20 +0100 [thread overview]
Message-ID: <20180214161620.4401-3-gregory.clement@bootlin.com> (raw)
On Armada 7K/8K we need to explicitly enable the register clock. This
clock is optional because not all the SoCs using this IP need it but at
least for Armada 7K/8K it is actually mandatory.
The change was done at xhci-plat level and not at a xhci-mvebu.c because,
it is expected that other SoC would have this kind of constraint.
The binding documentation is updating accordingly.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
Documentation/devicetree/bindings/usb/usb-xhci.txt | 5 +++-
drivers/usb/host/xhci-plat.c | 33 ++++++++++++++++++----
drivers/usb/host/xhci.h | 3 +-
3 files changed, 33 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index e2ea59bbca93..e4b14511f4f8 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -27,7 +27,10 @@ Required properties:
- interrupts: one XHCI interrupt should be described here.
Optional properties:
- - clocks: reference to a clock
+ - clocks: reference to the clocks
+ - clock-names: mandatory if there is a second clock, in this case
+ the name must be "core" for the first clock and "reg" for the
+ second one
- usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
- usb3-lpm-capable: determines if platform is USB3 LPM capable
- quirk-broken-port-ped: set if the controller has broken port disable mechanism
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 79afaac57ef6..fd0c399013a2 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -157,6 +157,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
struct resource *res;
struct usb_hcd *hcd;
struct clk *clk;
+ struct clk *reg_clk;
int ret;
int irq;
@@ -226,17 +227,27 @@ static int xhci_plat_probe(struct platform_device *pdev)
hcd->rsrc_len = resource_size(res);
/*
- * Not all platforms have a clk so it is not an error if the
- * clock does not exists.
+ * Not all platforms have clks so it is not an error if the
+ * clock do not exist.
*/
+ reg_clk = devm_clk_get(&pdev->dev, "reg");
+ if (!IS_ERR(reg_clk)) {
+ ret = clk_prepare_enable(reg_clk);
+ if (ret)
+ goto put_hcd;
+ } else if (PTR_ERR(reg_clk) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto put_hcd;
+ }
+
clk = devm_clk_get(&pdev->dev, NULL);
if (!IS_ERR(clk)) {
ret = clk_prepare_enable(clk);
if (ret)
- goto put_hcd;
+ goto disable_reg_clk;
} else if (PTR_ERR(clk) == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
- goto put_hcd;
+ goto disable_reg_clk;
}
xhci = hcd_to_xhci(hcd);
@@ -252,6 +263,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
device_wakeup_enable(hcd->self.controller);
xhci->clk = clk;
+ xhci->reg_clk = reg_clk;
xhci->main_hcd = hcd;
xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
dev_name(&pdev->dev), hcd);
@@ -321,6 +333,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
disable_clk:
clk_disable_unprepare(clk);
+disable_reg_clk:
+ clk_disable_unprepare(reg_clk);
+
put_hcd:
usb_put_hcd(hcd);
@@ -336,6 +351,7 @@ static int xhci_plat_remove(struct platform_device *dev)
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct clk *clk = xhci->clk;
+ struct clk *reg_clk = xhci->reg_clk;
xhci->xhc_state |= XHCI_STATE_REMOVING;
@@ -346,6 +362,7 @@ static int xhci_plat_remove(struct platform_device *dev)
usb_put_hcd(xhci->shared_hcd);
clk_disable_unprepare(clk);
+ clk_disable_unprepare(reg_clk);
usb_put_hcd(hcd);
pm_runtime_set_suspended(&dev->dev);
@@ -370,8 +387,10 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev)
*/
ret = xhci_suspend(xhci, device_may_wakeup(dev));
- if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk))
+ if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk)) {
clk_disable_unprepare(xhci->clk);
+ clk_disable_unprepare(xhci->reg_clk);
+ }
return ret;
}
@@ -382,8 +401,10 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ret;
- if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk))
+ if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk)) {
+ clk_prepare_enable(xhci->reg_clk);
clk_prepare_enable(xhci->clk);
+ }
ret = xhci_priv_resume_quirk(hcd);
if (ret)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 96099a245c69..9884aaba1b40 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1726,8 +1726,9 @@ struct xhci_hcd {
int page_shift;
/* msi-x vectors */
int msix_count;
- /* optional clock */
+ /* optional clocks */
struct clk *clk;
+ struct clk *reg_clk;
/* data structures */
struct xhci_device_context_array *dcbaa;
struct xhci_ring *cmd_ring;
next reply other threads:[~2018-02-14 16:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-14 16:16 Gregory CLEMENT [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-02-28 16:05 [2/2] usb: host: xhci-plat: Fix clock resource by adding a register clock Mathias Nyman
2018-02-28 16:09 Manu Gautam
2018-02-28 16:24 Gregory CLEMENT
2018-03-14 15:56 Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180214161620.4401-3-gregory.clement@bootlin.com \
--to=gregory.clement@bootlin.com \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@bootlin.com \
--cc=gregkh@linuxfoundation.org \
--cc=hannah@marvell.com \
--cc=igall@marvell.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=miquel.raynal@bootlin.com \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=omrii@marvell.com \
--cc=sebastian.hesselbarth@gmail.com \
--cc=shadi@marvell.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).