[1/4] lan78xx: Read MAC address from DT if present

[1/4] lan78xx: Read MAC address from DT if present

[Phil Elwell]

There is a standard mechanism for locating and using a MAC address from
the Device Tree. Use this facility in the lan78xx driver to support
applications without programmed EEPROM or OTP. At the same time,
regularise the handling of the different address sources.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
 drivers/net/usb/lan78xx.c | 44 +++++++++++++++++++++++---------------------
 1 file changed, 23 insertions(+), 21 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 55a78eb..d2727b5 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -37,6 +37,7 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/microchipphy.h>
 #include <linux/phy.h>
+#include <linux/of_net.h>
 #include "lan78xx.h"
 
 #define DRIVER_AUTHOR	"WOOJUNG HUH <woojung.huh@microchip.com>"
@@ -1651,34 +1652,35 @@ static void lan78xx_init_mac_address(struct lan78xx_net *dev)
 	addr[5] = (addr_hi >> 8) & 0xFF;
 
 	if (!is_valid_ether_addr(addr)) {
-		/* reading mac address from EEPROM or OTP */
-		if ((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
-					 addr) == 0) ||
-		    (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
-				      addr) == 0)) {
-			if (is_valid_ether_addr(addr)) {
-				/* eeprom values are valid so use them */
-				netif_dbg(dev, ifup, dev->net,
-					  "MAC address read from EEPROM");
-			} else {
-				/* generate random MAC */
-				random_ether_addr(addr);
-				netif_dbg(dev, ifup, dev->net,
-					  "MAC address set to random addr");
-			}
+		const u8 *mac_addr;
 
-			addr_lo = addr[0] | (addr[1] << 8) |
-				  (addr[2] << 16) | (addr[3] << 24);
-			addr_hi = addr[4] | (addr[5] << 8);
-
-			ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
-			ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
+		mac_addr = of_get_mac_address(dev->udev->dev.of_node);
+		if (mac_addr) {
+			/* valid address present in Device Tree */
+			ether_addr_copy(addr, mac_addr);
+			netif_dbg(dev, ifup, dev->net,
+				  "MAC address read from Device Tree");
+		} else if (((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET,
+						 ETH_ALEN, addr) == 0) ||
+			    (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET,
+					      ETH_ALEN, addr) == 0)) &&
+			   is_valid_ether_addr(addr)) {
+			/* eeprom values are valid so use them */
+			netif_dbg(dev, ifup, dev->net,
+				  "MAC address read from EEPROM");
 		} else {
 			/* generate random MAC */
 			random_ether_addr(addr);
 			netif_dbg(dev, ifup, dev->net,
 				  "MAC address set to random addr");
 		}
+
+		addr_lo = addr[0] | (addr[1] << 8) |
+			  (addr[2] << 16) | (addr[3] << 24);
+		addr_hi = addr[4] | (addr[5] << 8);
+
+		ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
+		ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
 	}
 
 	ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo);

[1/4] lan78xx: Read MAC address from DT if present

[Andrew Lunn]

Hi Phil

> -			ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
> -			ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
> +		mac_addr = of_get_mac_address(dev->udev->dev.of_node);

It might be better to use the higher level eth_platform_get_mac_address().

   Andrew
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[1/4] lan78xx: Read MAC address from DT if present

[Phil Elwell]

Hi Andrew,

On 12/04/2018 15:06, Andrew Lunn wrote:
> Hi Phil
> 
>> -			ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
>> -			ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
>> +		mac_addr = of_get_mac_address(dev->udev->dev.of_node);
> 
> It might be better to use the higher level eth_platform_get_mac_address().

OK - I'll take your word for it.

Phil
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html