Inquiry for adding PID to Cp2102 driver

[Johan Hovold <johan@kernel.org>]

On Fri, Jun 15, 2018 at 05:05:38PM +0200, Carlos Barcala Lara wrote:
> Dear Johan (and rest of the team)
> 
> This is Carlos Barcala, from CESINEL SL, in Spain. We are a little manufacturer
> of Power Quality Analyzers and Energy Meters. We include in all our products
> the Silabs CP2102 chip for USB communications and we would like to include
> support for our instruments in Linux.
> 
> Somebody gave me your contact regarding this matter, so I beg you to include
> the following items in the Silabs CP2102 Linux kernel´s driver:
> 
> USB\VID_10C4&PID_817C --> "CESINEL MEDCAL N Power Quality Monitor"
> USB\VID_10C4&PID_817D --> "CESINEL MEDCAL NT Power Quality Monitor"
> USB\VID_10C4&PID_817E --> "CESINEL MEDCAL S Power Quality Monitor"
> USB\VID_10C4&PID_82EF --> "CESINEL FALCO 6105 AC Power Supply"
> USB\VID_10C4&PID_82F1 --> "CESINEL MEDCAL EFD Earth Fault Detector"
> USB\VID_10C4&PID_82F2 --> "CESINEL MEDCAL ST Network Analyzer"
> USB\VID_10C4&PID_851E --> "CESINEL MEDCAL PT Network Analyzer"
> USB\VID_10C4&PID_85B8 --> "CESINEL ReCon T Energy Logger"
> USB\VID_10C4&PID_88FB --> "CESINEL MEDCAL STII Network Analyzer"
> USB\VID_10C4&PID_8938 --> "CESINEL MEDCAL S II Network Analyzer"
> USB\VID_10C4&PID_89A4 --> "CESINEL FTBC Flexible Thyristor Bridge Controller"

Would you mind taking a look at the below patch and double check that
I got all the entries right?

If you ever need to add more ids you you could use that patch as a
basis. 

Thanks,
Johan


From c4e9e567fadd76cfe9f70fc9377598a6b7187c38 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Mon, 18 Jun 2018 10:09:44 +0200
Subject: [PATCH] USB: serial: cp210x: add CESINEL device ids

Add device ids for CESINEL products.

Reported-by: Carlos Barcala Lara <cabl@cesinel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/cp210x.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 14cf657247b6..ee0cc1d90b51 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -95,6 +95,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
 	{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
+	{ USB_DEVICE(0x10C4, 0x817C) }, /* CESINEL MEDCAL N Power Quality Monitor */
+	{ USB_DEVICE(0x10C4, 0x817D) }, /* CESINEL MEDCAL NT Power Quality Monitor */
+	{ USB_DEVICE(0x10C4, 0x817E) }, /* CESINEL MEDCAL S Power Quality Monitor */
 	{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
 	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
 	{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
@@ -112,6 +115,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
 	{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
 	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
+	{ USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */
+	{ USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */
+	{ USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */
 	{ USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */
 	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
@@ -124,7 +130,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
 	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
 	{ USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */
+	{ USB_DEVICE(0x10C4, 0x851E) }, /* CESINEL MEDCAL PT Network Analyzer */
 	{ USB_DEVICE(0x10C4, 0x85A7) }, /* LifeScan OneTouch Verio IQ */
+	{ USB_DEVICE(0x10C4, 0x85B8) }, /* CESINEL ReCon T Energy Logger */
 	{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
 	{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
 	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
@@ -134,10 +142,13 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8857) },	/* CEL EM357 ZigBee USB Stick */
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
+	{ USB_DEVICE(0x10C4, 0x88FB) }, /* CESINEL MEDCAL STII Network Analyzer */
+	{ USB_DEVICE(0x10C4, 0x8938) }, /* CESINEL MEDCAL S II Network Analyzer */
 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
 	{ USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */
 	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
 	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
+	{ USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */
 	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
 	{ USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */
 	{ USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */