[3/3] usb: typec: ucsi: Fix for incorrect status data issue

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Thu, Jun 21, 2018 at 04:43:19PM +0300, Heikki Krogerus wrote:
> According to UCSI Specification, Connector Change Event only
> means a change in the Connector Status and Operation Mode
> fields of the STATUS data structure. So any other change
> should create another event.
> 
> Unfortunately on some platforms the firmware acting as PPM
> (platform policy manager - usually embedded controller
> firmware) still does not report any other status changes if
> there is a connector change event. So if the connector power
> or data role was changed when a device was plugged to the
> connector, the driver does not get any indication about
> that. The port will show wrong roles if that happens.
> 
> To fix the issue, always checking the data and power role
> together with a connector change event.
> 
> Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface")
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---

No stable kernel marking for this? odd...

greg k-h
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html