From: Guenter Roeck <linux@roeck-us.net>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: USB: OHCI: ohci-sm501: complete URBs in BH context
Date: Sat, 4 Aug 2018 12:19:56 -0700 [thread overview]
Message-ID: <20180804191956.GA5639@roeck-us.net> (raw)
On Sat, Aug 04, 2018 at 10:50:15AM -0400, Alan Stern wrote:
> On Fri, 3 Aug 2018, Guenter Roeck wrote:
>
> > Testing an USB drive connected to ohci-sm501 results in a large number
> > of runtime warnings.
> >
> > WARNING: CPU: 0 PID: 0 at ./include/linux/dma-mapping.h:541
> > hcd_buffer_free+0x148/0x178
> > Modules linked in:
> >
> > CPU: 0 PID: 0 Comm: swapper Not tainted 4.18.0-rc7-00014-g7ec386e4c991-dirty
> > PC is at hcd_buffer_free+0x148/0x178
> > PR is at hcd_buffer_free+0x66/0x178
> > PC : 8c26cbb0 SP : 8c481da8 SR : 400080f1
> > TEA : c00c8fe0
> > R0 : 000000f0 R1 : 000000f0 R2 : 8f9bb890 R3 : 00000000
> > R4 : 8f9c8800 R5 : 00001004 R6 : b07c6000 R7 : 007c6000
> > R8 : 00001004 R9 : 8f9bb814 R10 : 8c388104 R11 : 007c6000
> > R12 : b07c6000 R13 : 8f875680 R14 : 00000000
> > MACH: 000002fe MACL: 0000017c GBR : 00000000 PR : 8c26cace
> >
> > Call trace:
> > [<(ptrval)>] usb_hcd_unmap_urb_for_dma+0xf4/0x13c
> > [<(ptrval)>] arch_local_save_flags+0x0/0x8
> > [<(ptrval)>] __usb_hcd_giveback_urb+0x2e/0xdc
> > [<(ptrval)>] arch_local_save_flags+0x0/0x8
> > [<(ptrval)>] finish_urb+0x8a/0x164
> > [<(ptrval)>] arch_local_save_flags+0x0/0x8
> > [<(ptrval)>] printk+0x0/0x48
> > [<(ptrval)>] ohci_work.part.11+0x150/0x41c
> > [<(ptrval)>] td_done.isra.4+0x0/0x11c
> > [<(ptrval)>] vprintk_default+0x14/0x20
> > [<(ptrval)>] arch_local_save_flags+0x0/0x8
> > [<(ptrval)>] ohci_irq+0x20c/0x314
> > [<(ptrval)>] usb_hcd_irq+0x16/0x28
> >
> > Code analysis shows that interrupts are indeed disabled in ohci_irq().
> > Handle the situation by setting the HCD_BH flag in the ohci-sm501 driver.
> > With this flag set, urbs are released in a tasklet and not by the
> > interrupt handler.
> >
> > Fixes: f54aab6ebcecd ("usb: ohci-sm501 driver")
> > Signed-off-by: Guenter Roeck <linux@roeck-us.net>
>
> Unfortunately, one must not simply turn on this flag. Doing so will
> violate some of the documented requirements for scheduling of periodic
> transfers. Significantly deeper changes to the OHCI driver are
> necessary before the flag is set.
>
Well, it was worth a try. Note that I did try to figure out if there are
any pitfalls when setting HCD_BH, but I didn't find anything. Reminds me
of Hitchhiker through the Galaxy for some reason.
Cheers,
Guenter
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2018-08-04 19:19 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-04 19:19 Guenter Roeck [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-08-07 7:25 USB: OHCI: ohci-sm501: complete URBs in BH context Christoph Hellwig
2018-08-06 16:03 Guenter Roeck
2018-08-06 15:58 Guenter Roeck
2018-08-06 8:37 Christoph Hellwig
2018-08-06 8:33 Christoph Hellwig
2018-08-05 21:38 Guenter Roeck
2018-08-05 18:31 Alan Stern
2018-08-04 14:50 Alan Stern
2018-08-04 4:01 Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180804191956.GA5639@roeck-us.net \
--to=linux@roeck-us.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).