* [1/4] usb: chipidea: add flag for imx hsic implementation
@ 2018-10-16 5:01 Peter Chen
0 siblings, 0 replies; only message in thread
From: Peter Chen @ 2018-10-16 5:01 UTC (permalink / raw)
To: linux-usb@vger.kernel.org, frieder.schrempf@exceet.de
Cc: dl-linux-imx, robh+dt@kernel.org, devicetree@vger.kernel.org,
Peter Chen
NXP (Freecale) imx HSIC design has some special requirements, add
some flags at host code to handle them.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
drivers/usb/chipidea/host.c | 24 ++++++++++++++++++++++++
include/linux/usb/chipidea.h | 3 +++
2 files changed, 27 insertions(+)
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index d858a82c4f44..d74a13d7c21c 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -28,6 +28,20 @@ struct ehci_ci_priv {
struct regulator *reg_vbus;
};
+/* This function is used to override WKCN, WKDN, and WKOC */
+static void ci_ehci_override_wakeup_flag(struct ehci_hcd *ehci,
+ u32 __iomem *reg, u32 flags, bool set)
+{
+ u32 val = ehci_readl(ehci, reg);
+
+ if (set)
+ val |= flags;
+ else
+ val &= ~flags;
+
+ ehci_writel(ehci, val, reg);
+}
+
static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -170,6 +184,11 @@ static int host_start(struct ci_hdrc *ci)
otg->host = &hcd->self;
hcd->self.otg_port = 1;
}
+
+ if (ci->platdata->notify_event &&
+ (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC))
+ ci->platdata->notify_event
+ (ci, CI_HDRC_IMX_HSIC_ACTIVE_EVENT);
}
return ret;
@@ -218,6 +237,8 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci)
static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct device *dev = hcd->self.controller;
+ struct ci_hdrc *ci = dev_get_drvdata(dev);
int port;
u32 tmp;
@@ -249,6 +270,9 @@ static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
* It needs a short delay between set RS bit and PHCD.
*/
usleep_range(150, 200);
+ if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC)
+ ci_ehci_override_wakeup_flag(ehci, reg,
+ PORT_WKDISC_E | PORT_WKCONN_E, false);
break;
}
}
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 63758c399e4e..911e05af671e 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -60,9 +60,12 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_OVERRIDE_RX_BURST BIT(11)
#define CI_HDRC_OVERRIDE_PHY_CONTROL BIT(12) /* Glue layer manages phy */
#define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13)
+#define CI_HDRC_IMX_IS_HSIC BIT(14)
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
+#define CI_HDRC_IMX_HSIC_ACTIVE_EVENT 2
+#define CI_HDRC_IMX_HSIC_SUSPEND_EVENT 3
int (*notify_event) (struct ci_hdrc *ci, unsigned event);
struct regulator *reg_vbus;
struct usb_otg_caps ci_otg_caps;
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2018-10-16 5:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-10-16 5:01 [1/4] usb: chipidea: add flag for imx hsic implementation Peter Chen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).