* [v15,2/2] usb: typec: ucsi: add support for Cypress CCGx
@ 2018-10-26 16:36 Ajay Gupta
0 siblings, 0 replies; 3+ messages in thread
From: Ajay Gupta @ 2018-10-26 16:36 UTC (permalink / raw)
To: wsa, heikki.krogerus, peda, andriy.shevchenko
Cc: linux-usb, linux-i2c, Ajay Gupta
Latest NVIDIA GPU cards have a Cypress CCGx Type-C controller
over I2C interface.
This UCSI I2C driver uses I2C bus driver interface for communicating
with Type-C controller.
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
---
Changes from v1 -> v2
Fixed identation in drivers/usb/typec/ucsi/Kconfig
Changes from v2 -> v3
Fixed most of comments from Heikki
Rename ucsi_i2c_ccg.c -> ucsi_ccg.c
Changes from v3 -> v4
Fixed comments from Andy
Changes from v4 -> v5
Fixed comments from Andy
Changes from v5 -> v6
Fixed review comments from Greg
Changes from v6 -> v7
None
Changes from v7 -> v8
Fixed review comments from Peter
- Removed empty STOP message
- Using stack memory for i2c_transfer()
Changes from v8 -> v9
None
Changes from v9 -> v10
Fixed review comments from Peter
- Use UCSI macros
- Cleanups
Changes from v10 -> v11
Fixed review comments from Peter
- Combined two writes into one
- Used offsetof() for ucsi_data struct
Changes from v11 -> v12
- some cleanup
Changes from v12 -> v13
- changed "u8 buf[1]" -> "u8 data"
Changes from v13 -> v14
- Fixed commend from Heikki and Andy
- Added i2c adapters quirks check in ccg_read
- Removed "irq" field from struct ucsi_ccg
- Reorganize do {} while (); loop
Changes from v14 -> v15
- Fix unnecessary check for "data" in while () condition
drivers/usb/typec/ucsi/Kconfig | 10 +
drivers/usb/typec/ucsi/Makefile | 2 +
drivers/usb/typec/ucsi/ucsi_ccg.c | 307 ++++++++++++++++++++++++++++++
3 files changed, 319 insertions(+)
create mode 100644 drivers/usb/typec/ucsi/ucsi_ccg.c
diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
index e36d6c73c4a4..78118883f96c 100644
--- a/drivers/usb/typec/ucsi/Kconfig
+++ b/drivers/usb/typec/ucsi/Kconfig
@@ -23,6 +23,16 @@ config TYPEC_UCSI
if TYPEC_UCSI
+config UCSI_CCG
+ tristate "UCSI Interface Driver for Cypress CCGx"
+ depends on I2C
+ help
+ This driver enables UCSI support on platforms that expose a
+ Cypress CCGx Type-C controller over I2C interface.
+
+ To compile the driver as a module, choose M here: the module will be
+ called ucsi_ccg.
+
config UCSI_ACPI
tristate "UCSI ACPI Interface Driver"
depends on ACPI
diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
index 7afbea512207..2f4900b26210 100644
--- a/drivers/usb/typec/ucsi/Makefile
+++ b/drivers/usb/typec/ucsi/Makefile
@@ -8,3 +8,5 @@ typec_ucsi-y := ucsi.o
typec_ucsi-$(CONFIG_TRACING) += trace.o
obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
+
+obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
new file mode 100644
index 000000000000..de8a43bdff68
--- /dev/null
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UCSI driver for Cypress CCGx Type-C controller
+ *
+ * Copyright (C) 2017-2018 NVIDIA Corporation. All rights reserved.
+ * Author: Ajay Gupta <ajayg@nvidia.com>
+ *
+ * Some code borrowed from drivers/usb/typec/ucsi/ucsi_acpi.c
+ */
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#include <asm/unaligned.h>
+#include "ucsi.h"
+
+struct ucsi_ccg {
+ struct device *dev;
+ struct ucsi *ucsi;
+ struct ucsi_ppm ppm;
+ struct i2c_client *client;
+};
+
+#define CCGX_RAB_INTR_REG 0x06
+#define CCGX_RAB_UCSI_CONTROL 0x39
+#define CCGX_RAB_UCSI_CONTROL_START BIT(0)
+#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1)
+#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff))
+
+static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
+{
+ struct i2c_client *client = uc->client;
+ const struct i2c_adapter_quirks *quirks = client->adapter->quirks;
+ unsigned char buf[2];
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0x0,
+ .len = sizeof(buf),
+ .buf = buf,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .buf = data,
+ },
+ };
+ u32 rlen, rem_len = len, max_read_len = len;
+ int status;
+
+ /* check any max_read_len limitation on i2c adapter */
+ if (quirks && quirks->max_read_len)
+ max_read_len = quirks->max_read_len;
+
+ while (rem_len > 0) {
+ msgs[1].buf = &data[len - rem_len];
+ rlen = min_t(u16, rem_len, max_read_len);
+ msgs[1].len = rlen;
+ put_unaligned_le16(rab, buf);
+ status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (status < 0) {
+ dev_err(uc->dev, "i2c_transfer failed %d\n", status);
+ return status;
+ }
+ rab += rlen;
+ rem_len -= rlen;
+ }
+
+ return 0;
+}
+
+static int ccg_write(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
+{
+ struct i2c_client *client = uc->client;
+ unsigned char *buf;
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0x0,
+ }
+ };
+ int status;
+
+ buf = kzalloc(len + sizeof(rab), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ put_unaligned_le16(rab, buf);
+ memcpy(buf + sizeof(rab), data, len);
+
+ msgs[0].len = len + sizeof(rab);
+ msgs[0].buf = buf;
+
+ status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (status < 0) {
+ dev_err(uc->dev, "i2c_transfer failed %d\n", status);
+ kfree(buf);
+ return status;
+ }
+
+ kfree(buf);
+ return 0;
+}
+
+static int ucsi_ccg_init(struct ucsi_ccg *uc)
+{
+ unsigned int count = 10;
+ u8 data;
+ int status;
+
+ data = CCGX_RAB_UCSI_CONTROL_STOP;
+ status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data));
+ if (status < 0)
+ return status;
+
+ data = CCGX_RAB_UCSI_CONTROL_START;
+ status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data));
+ if (status < 0)
+ return status;
+
+ /*
+ * Flush CCGx RESPONSE queue by acking interrupts. Above ucsi control
+ * register write will push response which must be cleared.
+ */
+ do {
+ status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
+ if (status < 0)
+ return status;
+
+ if (!data)
+ return 0;
+
+ status = ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
+ if (status < 0)
+ return status;
+
+ usleep_range(10000, 11000);
+ } while (--count);
+
+ return -ETIMEDOUT;
+}
+
+static int ucsi_ccg_send_data(struct ucsi_ccg *uc)
+{
+ u8 *ppm = (u8 *)uc->ppm.data;
+ int status;
+ u16 rab;
+
+ rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_out));
+ status = ccg_write(uc, rab, ppm +
+ offsetof(struct ucsi_data, message_out),
+ sizeof(uc->ppm.data->message_out));
+ if (status < 0)
+ return status;
+
+ rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, ctrl));
+ return ccg_write(uc, rab, ppm + offsetof(struct ucsi_data, ctrl),
+ sizeof(uc->ppm.data->ctrl));
+}
+
+static int ucsi_ccg_recv_data(struct ucsi_ccg *uc)
+{
+ u8 *ppm = (u8 *)uc->ppm.data;
+ int status;
+ u16 rab;
+
+ rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, cci));
+ status = ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, cci),
+ sizeof(uc->ppm.data->cci));
+ if (status < 0)
+ return status;
+
+ rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_in));
+ return ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, message_in),
+ sizeof(uc->ppm.data->message_in));
+}
+
+static int ucsi_ccg_ack_interrupt(struct ucsi_ccg *uc)
+{
+ int status;
+ unsigned char data;
+
+ status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
+ if (status < 0)
+ return status;
+
+ return ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
+}
+
+static int ucsi_ccg_sync(struct ucsi_ppm *ppm)
+{
+ struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm);
+ int status;
+
+ status = ucsi_ccg_recv_data(uc);
+ if (status < 0)
+ return status;
+
+ /* ack interrupt to allow next command to run */
+ return ucsi_ccg_ack_interrupt(uc);
+}
+
+static int ucsi_ccg_cmd(struct ucsi_ppm *ppm, struct ucsi_control *ctrl)
+{
+ struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm);
+
+ ppm->data->ctrl.raw_cmd = ctrl->raw_cmd;
+ return ucsi_ccg_send_data(uc);
+}
+
+static irqreturn_t ccg_irq_handler(int irq, void *data)
+{
+ struct ucsi_ccg *uc = data;
+
+ ucsi_notify(uc->ucsi);
+
+ return IRQ_HANDLED;
+}
+
+static int ucsi_ccg_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct ucsi_ccg *uc;
+ int status;
+ u16 rab;
+
+ uc = devm_kzalloc(dev, sizeof(*uc), GFP_KERNEL);
+ if (!uc)
+ return -ENOMEM;
+
+ uc->ppm.data = devm_kzalloc(dev, sizeof(struct ucsi_data), GFP_KERNEL);
+ if (!uc->ppm.data)
+ return -ENOMEM;
+
+ uc->ppm.cmd = ucsi_ccg_cmd;
+ uc->ppm.sync = ucsi_ccg_sync;
+ uc->dev = dev;
+ uc->client = client;
+
+ /* reset ccg device and initialize ucsi */
+ status = ucsi_ccg_init(uc);
+ if (status < 0) {
+ dev_err(uc->dev, "ucsi_ccg_init failed - %d\n", status);
+ return status;
+ }
+
+ status = devm_request_threaded_irq(dev, client->irq, NULL,
+ ccg_irq_handler,
+ IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+ dev_name(dev), uc);
+ if (status < 0) {
+ dev_err(uc->dev, "request_threaded_irq failed - %d\n", status);
+ return status;
+ }
+
+ uc->ucsi = ucsi_register_ppm(dev, &uc->ppm);
+ if (IS_ERR(uc->ucsi)) {
+ dev_err(uc->dev, "ucsi_register_ppm failed\n");
+ return PTR_ERR(uc->ucsi);
+ }
+
+ rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, version));
+ status = ccg_read(uc, rab, (u8 *)(uc->ppm.data) +
+ offsetof(struct ucsi_data, version),
+ sizeof(uc->ppm.data->version));
+ if (status < 0) {
+ ucsi_unregister_ppm(uc->ucsi);
+ return status;
+ }
+
+ i2c_set_clientdata(client, uc);
+ return 0;
+}
+
+static int ucsi_ccg_remove(struct i2c_client *client)
+{
+ struct ucsi_ccg *uc = i2c_get_clientdata(client);
+
+ ucsi_unregister_ppm(uc->ucsi);
+
+ return 0;
+}
+
+static const struct i2c_device_id ucsi_ccg_device_id[] = {
+ {"ccgx-ucsi", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ucsi_ccg_device_id);
+
+static struct i2c_driver ucsi_ccg_driver = {
+ .driver = {
+ .name = "ucsi_ccg",
+ },
+ .probe = ucsi_ccg_probe,
+ .remove = ucsi_ccg_remove,
+ .id_table = ucsi_ccg_device_id,
+};
+
+module_i2c_driver(ucsi_ccg_driver);
+
+MODULE_AUTHOR("Ajay Gupta <ajayg@nvidia.com>");
+MODULE_DESCRIPTION("UCSI driver for Cypress CCGx Type-C controller");
+MODULE_LICENSE("GPL v2");
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [v15,2/2] usb: typec: ucsi: add support for Cypress CCGx
@ 2018-11-02 13:31 Heikki Krogerus
0 siblings, 0 replies; 3+ messages in thread
From: Heikki Krogerus @ 2018-11-02 13:31 UTC (permalink / raw)
To: Ajay Gupta; +Cc: wsa, peda, andriy.shevchenko, linux-usb, linux-i2c
On Fri, Oct 26, 2018 at 09:36:59AM -0700, Ajay Gupta wrote:
> Latest NVIDIA GPU cards have a Cypress CCGx Type-C controller
> over I2C interface.
>
> This UCSI I2C driver uses I2C bus driver interface for communicating
> with Type-C controller.
>
> Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> Changes from v1 -> v2
> Fixed identation in drivers/usb/typec/ucsi/Kconfig
> Changes from v2 -> v3
> Fixed most of comments from Heikki
> Rename ucsi_i2c_ccg.c -> ucsi_ccg.c
> Changes from v3 -> v4
> Fixed comments from Andy
> Changes from v4 -> v5
> Fixed comments from Andy
> Changes from v5 -> v6
> Fixed review comments from Greg
> Changes from v6 -> v7
> None
> Changes from v7 -> v8
> Fixed review comments from Peter
> - Removed empty STOP message
> - Using stack memory for i2c_transfer()
> Changes from v8 -> v9
> None
> Changes from v9 -> v10
> Fixed review comments from Peter
> - Use UCSI macros
> - Cleanups
> Changes from v10 -> v11
> Fixed review comments from Peter
> - Combined two writes into one
> - Used offsetof() for ucsi_data struct
> Changes from v11 -> v12
> - some cleanup
> Changes from v12 -> v13
> - changed "u8 buf[1]" -> "u8 data"
> Changes from v13 -> v14
> - Fixed commend from Heikki and Andy
> - Added i2c adapters quirks check in ccg_read
> - Removed "irq" field from struct ucsi_ccg
> - Reorganize do {} while (); loop
> Changes from v14 -> v15
> - Fix unnecessary check for "data" in while () condition
>
> drivers/usb/typec/ucsi/Kconfig | 10 +
> drivers/usb/typec/ucsi/Makefile | 2 +
> drivers/usb/typec/ucsi/ucsi_ccg.c | 307 ++++++++++++++++++++++++++++++
> 3 files changed, 319 insertions(+)
> create mode 100644 drivers/usb/typec/ucsi/ucsi_ccg.c
>
> diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
> index e36d6c73c4a4..78118883f96c 100644
> --- a/drivers/usb/typec/ucsi/Kconfig
> +++ b/drivers/usb/typec/ucsi/Kconfig
> @@ -23,6 +23,16 @@ config TYPEC_UCSI
>
> if TYPEC_UCSI
>
> +config UCSI_CCG
> + tristate "UCSI Interface Driver for Cypress CCGx"
> + depends on I2C
> + help
> + This driver enables UCSI support on platforms that expose a
> + Cypress CCGx Type-C controller over I2C interface.
> +
> + To compile the driver as a module, choose M here: the module will be
> + called ucsi_ccg.
> +
> config UCSI_ACPI
> tristate "UCSI ACPI Interface Driver"
> depends on ACPI
> diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
> index 7afbea512207..2f4900b26210 100644
> --- a/drivers/usb/typec/ucsi/Makefile
> +++ b/drivers/usb/typec/ucsi/Makefile
> @@ -8,3 +8,5 @@ typec_ucsi-y := ucsi.o
> typec_ucsi-$(CONFIG_TRACING) += trace.o
>
> obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
> +
> +obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
> diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
> new file mode 100644
> index 000000000000..de8a43bdff68
> --- /dev/null
> +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
> @@ -0,0 +1,307 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * UCSI driver for Cypress CCGx Type-C controller
> + *
> + * Copyright (C) 2017-2018 NVIDIA Corporation. All rights reserved.
> + * Author: Ajay Gupta <ajayg@nvidia.com>
> + *
> + * Some code borrowed from drivers/usb/typec/ucsi/ucsi_acpi.c
> + */
> +#include <linux/acpi.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +
> +#include <asm/unaligned.h>
> +#include "ucsi.h"
> +
> +struct ucsi_ccg {
> + struct device *dev;
> + struct ucsi *ucsi;
> + struct ucsi_ppm ppm;
> + struct i2c_client *client;
> +};
> +
> +#define CCGX_RAB_INTR_REG 0x06
> +#define CCGX_RAB_UCSI_CONTROL 0x39
> +#define CCGX_RAB_UCSI_CONTROL_START BIT(0)
> +#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1)
> +#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff))
> +
> +static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
> +{
> + struct i2c_client *client = uc->client;
> + const struct i2c_adapter_quirks *quirks = client->adapter->quirks;
> + unsigned char buf[2];
> + struct i2c_msg msgs[] = {
> + {
> + .addr = client->addr,
> + .flags = 0x0,
> + .len = sizeof(buf),
> + .buf = buf,
> + },
> + {
> + .addr = client->addr,
> + .flags = I2C_M_RD,
> + .buf = data,
> + },
> + };
> + u32 rlen, rem_len = len, max_read_len = len;
> + int status;
> +
> + /* check any max_read_len limitation on i2c adapter */
> + if (quirks && quirks->max_read_len)
> + max_read_len = quirks->max_read_len;
> +
> + while (rem_len > 0) {
> + msgs[1].buf = &data[len - rem_len];
> + rlen = min_t(u16, rem_len, max_read_len);
> + msgs[1].len = rlen;
> + put_unaligned_le16(rab, buf);
> + status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> + if (status < 0) {
> + dev_err(uc->dev, "i2c_transfer failed %d\n", status);
> + return status;
> + }
> + rab += rlen;
> + rem_len -= rlen;
> + }
> +
> + return 0;
> +}
> +
> +static int ccg_write(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
> +{
> + struct i2c_client *client = uc->client;
> + unsigned char *buf;
> + struct i2c_msg msgs[] = {
> + {
> + .addr = client->addr,
> + .flags = 0x0,
> + }
> + };
> + int status;
> +
> + buf = kzalloc(len + sizeof(rab), GFP_KERNEL);
> + if (!buf)
> + return -ENOMEM;
> +
> + put_unaligned_le16(rab, buf);
> + memcpy(buf + sizeof(rab), data, len);
> +
> + msgs[0].len = len + sizeof(rab);
> + msgs[0].buf = buf;
> +
> + status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> + if (status < 0) {
> + dev_err(uc->dev, "i2c_transfer failed %d\n", status);
> + kfree(buf);
> + return status;
> + }
> +
> + kfree(buf);
> + return 0;
> +}
> +
> +static int ucsi_ccg_init(struct ucsi_ccg *uc)
> +{
> + unsigned int count = 10;
> + u8 data;
> + int status;
> +
> + data = CCGX_RAB_UCSI_CONTROL_STOP;
> + status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data));
> + if (status < 0)
> + return status;
> +
> + data = CCGX_RAB_UCSI_CONTROL_START;
> + status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data));
> + if (status < 0)
> + return status;
> +
> + /*
> + * Flush CCGx RESPONSE queue by acking interrupts. Above ucsi control
> + * register write will push response which must be cleared.
> + */
> + do {
> + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
> + if (status < 0)
> + return status;
> +
> + if (!data)
> + return 0;
> +
> + status = ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
> + if (status < 0)
> + return status;
> +
> + usleep_range(10000, 11000);
> + } while (--count);
> +
> + return -ETIMEDOUT;
> +}
> +
> +static int ucsi_ccg_send_data(struct ucsi_ccg *uc)
> +{
> + u8 *ppm = (u8 *)uc->ppm.data;
> + int status;
> + u16 rab;
> +
> + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_out));
> + status = ccg_write(uc, rab, ppm +
> + offsetof(struct ucsi_data, message_out),
> + sizeof(uc->ppm.data->message_out));
> + if (status < 0)
> + return status;
> +
> + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, ctrl));
> + return ccg_write(uc, rab, ppm + offsetof(struct ucsi_data, ctrl),
> + sizeof(uc->ppm.data->ctrl));
> +}
> +
> +static int ucsi_ccg_recv_data(struct ucsi_ccg *uc)
> +{
> + u8 *ppm = (u8 *)uc->ppm.data;
> + int status;
> + u16 rab;
> +
> + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, cci));
> + status = ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, cci),
> + sizeof(uc->ppm.data->cci));
> + if (status < 0)
> + return status;
> +
> + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_in));
> + return ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, message_in),
> + sizeof(uc->ppm.data->message_in));
> +}
> +
> +static int ucsi_ccg_ack_interrupt(struct ucsi_ccg *uc)
> +{
> + int status;
> + unsigned char data;
> +
> + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
> + if (status < 0)
> + return status;
> +
> + return ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
> +}
> +
> +static int ucsi_ccg_sync(struct ucsi_ppm *ppm)
> +{
> + struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm);
> + int status;
> +
> + status = ucsi_ccg_recv_data(uc);
> + if (status < 0)
> + return status;
> +
> + /* ack interrupt to allow next command to run */
> + return ucsi_ccg_ack_interrupt(uc);
> +}
> +
> +static int ucsi_ccg_cmd(struct ucsi_ppm *ppm, struct ucsi_control *ctrl)
> +{
> + struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm);
> +
> + ppm->data->ctrl.raw_cmd = ctrl->raw_cmd;
> + return ucsi_ccg_send_data(uc);
> +}
> +
> +static irqreturn_t ccg_irq_handler(int irq, void *data)
> +{
> + struct ucsi_ccg *uc = data;
> +
> + ucsi_notify(uc->ucsi);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int ucsi_ccg_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct ucsi_ccg *uc;
> + int status;
> + u16 rab;
> +
> + uc = devm_kzalloc(dev, sizeof(*uc), GFP_KERNEL);
> + if (!uc)
> + return -ENOMEM;
> +
> + uc->ppm.data = devm_kzalloc(dev, sizeof(struct ucsi_data), GFP_KERNEL);
> + if (!uc->ppm.data)
> + return -ENOMEM;
> +
> + uc->ppm.cmd = ucsi_ccg_cmd;
> + uc->ppm.sync = ucsi_ccg_sync;
> + uc->dev = dev;
> + uc->client = client;
> +
> + /* reset ccg device and initialize ucsi */
> + status = ucsi_ccg_init(uc);
> + if (status < 0) {
> + dev_err(uc->dev, "ucsi_ccg_init failed - %d\n", status);
> + return status;
> + }
> +
> + status = devm_request_threaded_irq(dev, client->irq, NULL,
> + ccg_irq_handler,
> + IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> + dev_name(dev), uc);
> + if (status < 0) {
> + dev_err(uc->dev, "request_threaded_irq failed - %d\n", status);
> + return status;
> + }
> +
> + uc->ucsi = ucsi_register_ppm(dev, &uc->ppm);
> + if (IS_ERR(uc->ucsi)) {
> + dev_err(uc->dev, "ucsi_register_ppm failed\n");
> + return PTR_ERR(uc->ucsi);
> + }
> +
> + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, version));
> + status = ccg_read(uc, rab, (u8 *)(uc->ppm.data) +
> + offsetof(struct ucsi_data, version),
> + sizeof(uc->ppm.data->version));
> + if (status < 0) {
> + ucsi_unregister_ppm(uc->ucsi);
> + return status;
> + }
> +
> + i2c_set_clientdata(client, uc);
> + return 0;
> +}
> +
> +static int ucsi_ccg_remove(struct i2c_client *client)
> +{
> + struct ucsi_ccg *uc = i2c_get_clientdata(client);
> +
> + ucsi_unregister_ppm(uc->ucsi);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id ucsi_ccg_device_id[] = {
> + {"ccgx-ucsi", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, ucsi_ccg_device_id);
> +
> +static struct i2c_driver ucsi_ccg_driver = {
> + .driver = {
> + .name = "ucsi_ccg",
> + },
> + .probe = ucsi_ccg_probe,
> + .remove = ucsi_ccg_remove,
> + .id_table = ucsi_ccg_device_id,
> +};
> +
> +module_i2c_driver(ucsi_ccg_driver);
> +
> +MODULE_AUTHOR("Ajay Gupta <ajayg@nvidia.com>");
> +MODULE_DESCRIPTION("UCSI driver for Cypress CCGx Type-C controller");
> +MODULE_LICENSE("GPL v2");
> --
> 2.17.1
thanks,
^ permalink raw reply [flat|nested] 3+ messages in thread
* [v15,2/2] usb: typec: ucsi: add support for Cypress CCGx
@ 2018-11-09 17:54 Wolfram Sang
0 siblings, 0 replies; 3+ messages in thread
From: Wolfram Sang @ 2018-11-09 17:54 UTC (permalink / raw)
To: Ajay Gupta; +Cc: heikki.krogerus, peda, andriy.shevchenko, linux-usb, linux-i2c
On Fri, Oct 26, 2018 at 09:36:59AM -0700, Ajay Gupta wrote:
> Latest NVIDIA GPU cards have a Cypress CCGx Type-C controller
> over I2C interface.
>
> This UCSI I2C driver uses I2C bus driver interface for communicating
> with Type-C controller.
>
> Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Applied to for-current, thanks!
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-11-09 17:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-11-02 13:31 [v15,2/2] usb: typec: ucsi: add support for Cypress CCGx Heikki Krogerus
-- strict thread matches above, loose matches on Subject: below --
2018-11-09 17:54 Wolfram Sang
2018-10-26 16:36 Ajay Gupta
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).