[02/14] dt-bindings: phy-pxa-usb: add bindings

[Pavel Machek <pavel@ucw.cz>]

On Wed 2018-08-22 22:42:55, Lubomir Rintel wrote:
> This is the PHY chip for USB OTG on PXA platforms.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  .../devicetree/bindings/phy/phy-pxa-usb.txt     | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-pxa-usb.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt
> new file mode 100644
> index 000000000000..5b12ab44c9e6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt
> @@ -0,0 +1,17 @@
> +Marvell PXA USB PHY
> +-------------------
> +
> +Required properties:
> +- compatible: one of: "marvell,mmp2-usb-phy", "marvell,pxa910-usb-phy",
> +	"marvell,pxa168-usb-phy",
> +- #phy-cells: must be 0
> +
> +Example:
> +	usb-phy: usbphy@d4207000 {
> +		compatible = "marvell,mmp2-usb-phy";
> +		reg = <0xd4207000 0x40>;
> +		#phy-cells = <0>;
> +		status = "okay";
> +	};
> +This document explains only the device tree data binding. For general
> +information about PHY subsystem refer to Documentation/phy.txt

Add empty space between last paragraph?

Delete "only" and "data"?

Acked-by: Pavel Machek <pavel@ucw.cz>
									Pavel