From: Johan Hovold <johan@kernel.org>
To: "Jörgen Storvist" <jorgen.storvist@gmail.com>
Cc: linux-usb@vger.kernel.org, johan@kernel.org
Subject: [v2] USB: serial: option: add Fibocom NL668 series
Date: Thu, 13 Dec 2018 11:26:45 +0100 [thread overview]
Message-ID: <20181213102645.GL3500@localhost> (raw)
On Wed, Dec 12, 2018 at 09:47:36PM +0100, Jörgen Storvist wrote:
> Added USB serial option driver support for Fibocom NL668 series cellular
> modules. Reserved USB endpoints 4, 5 and 6 for network + ADB interfaces.
>
> usb-devices output (QMI mode)
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=1508 ProdID=1001 Rev=03.18
> S: Manufacturer=Nodecom NL668 Modem
> S: Product=Nodecom NL668-CN Modem
> S: SerialNumber=
> C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
> I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
> I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
>
> usb-devices output (ECM mode)
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 17 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=1508 ProdID=1001 Rev=03.18
> S: Manufacturer=Nodecom NL668 Modem
> S: Product=Nodecom NL668-CN Modem
> S: SerialNumber=
> C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
> I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
> I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
> I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
>
> Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
> ---
>
> Changelog:
> Fixed line break issues
> Added reservation for ADB interface also
> Updated source option.c file to latest in usb-linus branch
Thanks for updating, now applied.
Johan
next reply other threads:[~2018-12-13 10:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-13 10:26 Johan Hovold [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-12-12 20:47 [v2] USB: serial: option: add Fibocom NL668 series Jörgen Storvist
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181213102645.GL3500@localhost \
--to=johan@kernel.org \
--cc=jorgen.storvist@gmail.com \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).