* [v4,1/4] dt-bindings: phy: remove qcom-dwc3-usb-phy
@ 2019-02-07 11:17 Jorge Ramirez
0 siblings, 0 replies; 2+ messages in thread
From: Jorge Ramirez @ 2019-02-07 11:17 UTC (permalink / raw)
To: jorge.ramirez-ortiz, robh, bjorn.andersson
Cc: swboyd, andy.gross, shawn.guo, gregkh, mark.rutland, kishon,
jackp, devicetree, linux-arm-msm, linux-usb, linux-kernel,
linux-arm-kernel, khasim.mohammed
This binding is not used by any driver.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
---
.../bindings/phy/qcom-dwc3-usb-phy.txt | 37 -------------------
1 file changed, 37 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
deleted file mode 100644
index a1697c27aecd..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Qualcomm DWC3 HS AND SS PHY CONTROLLER
---------------------------------------
-
-DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
-controllers. Each DWC3 PHY controller should have its own node.
-
-Required properties:
-- compatible: should contain one of the following:
- - "qcom,dwc3-hs-usb-phy" for High Speed Synopsis PHY controller
- - "qcom,dwc3-ss-usb-phy" for Super Speed Synopsis PHY controller
-- reg: offset and length of the DWC3 PHY controller register set
-- #phy-cells: must be zero
-- clocks: a list of phandles and clock-specifier pairs, one for each entry in
- clock-names.
-- clock-names: Should contain "ref" for the PHY reference clock
-
-Optional clocks:
- "xo" External reference clock
-
-Example:
- phy@100f8800 {
- compatible = "qcom,dwc3-hs-usb-phy";
- reg = <0x100f8800 0x30>;
- clocks = <&gcc USB30_0_UTMI_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- };
-
- phy@100f8830 {
- compatible = "qcom,dwc3-ss-usb-phy";
- reg = <0x100f8830 0x30>;
- clocks = <&gcc USB30_0_MASTER_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- };
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [v4,1/4] dt-bindings: phy: remove qcom-dwc3-usb-phy
@ 2019-02-13 21:44 Rob Herring
0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring @ 2019-02-13 21:44 UTC (permalink / raw)
To: Jorge Ramirez-Ortiz
Cc: robh, bjorn.andersson, swboyd, andy.gross, shawn.guo, gregkh,
mark.rutland, kishon, jackp, devicetree, linux-arm-msm, linux-usb,
linux-kernel, linux-arm-kernel, khasim.mohammed
On Thu, 7 Feb 2019 12:17:31 +0100, Jorge Ramirez-Ortiz wrote:
> This binding is not used by any driver.
>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
> ---
> .../bindings/phy/qcom-dwc3-usb-phy.txt | 37 -------------------
> 1 file changed, 37 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-02-13 21:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-02-13 21:44 [v4,1/4] dt-bindings: phy: remove qcom-dwc3-usb-phy Rob Herring
-- strict thread matches above, loose matches on Subject: below --
2019-02-07 11:17 Jorge Ramirez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).