[3/3] usb: ohci-da8xx: drop the vbus GPIO

[3/3] usb: ohci-da8xx: drop the vbus GPIO

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

All users now setup a fixed regulator for the vbus supply. We can drop
the vbus GPIO code. We need to modify the over-current interrupt
handler to use a threaded irq as we cannot disable a regulator from
interrupt context.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/usb/host/ohci-da8xx.c | 39 ++++++++++++++++-------------------
 1 file changed, 18 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index ca8a94f15ac0..f3892034de58 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -41,7 +41,6 @@ struct da8xx_ohci_hcd {
 	struct regulator *vbus_reg;
 	struct notifier_block nb;
 	unsigned int reg_enabled;
-	struct gpio_desc *vbus_gpio;
 	struct gpio_desc *oc_gpio;
 };
 
@@ -92,11 +91,6 @@ static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
 	struct device *dev = hcd->self.controller;
 	int ret;
 
-	if (da8xx_ohci->vbus_gpio) {
-		gpiod_set_value_cansleep(da8xx_ohci->vbus_gpio, on);
-		return 0;
-	}
-
 	if (!da8xx_ohci->vbus_reg)
 		return 0;
 
@@ -124,9 +118,6 @@ static int ohci_da8xx_get_power(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 
-	if (da8xx_ohci->vbus_gpio)
-		return gpiod_get_value_cansleep(da8xx_ohci->vbus_gpio);
-
 	if (da8xx_ohci->vbus_reg)
 		return regulator_is_enabled(da8xx_ohci->vbus_reg);
 
@@ -159,9 +150,6 @@ static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 
-	if (da8xx_ohci->vbus_gpio)
-		return 1;
-
 	if (da8xx_ohci->vbus_reg)
 		return 1;
 
@@ -211,7 +199,16 @@ static irqreturn_t ohci_da8xx_oc_handler(int irq, void *data)
 	struct da8xx_ohci_hcd *da8xx_ohci = data;
 
 	if (gpiod_get_value(da8xx_ohci->oc_gpio))
-		gpiod_set_value(da8xx_ohci->vbus_gpio, 0);
+		return IRQ_WAKE_THREAD;
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ohci_da8xx_oc_thread(int irq, void *data)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = data;
+
+	regulator_disable(da8xx_ohci->vbus_reg);
 
 	return IRQ_HANDLED;
 }
@@ -424,11 +421,6 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
 		}
 	}
 
-	da8xx_ohci->vbus_gpio = devm_gpiod_get_optional(dev, "vbus",
-							GPIOD_OUT_HIGH);
-	if (IS_ERR(da8xx_ohci->vbus_gpio))
-		goto err;
-
 	da8xx_ohci->oc_gpio = devm_gpiod_get_optional(dev, "oc", GPIOD_IN);
 	if (IS_ERR(da8xx_ohci->oc_gpio))
 		goto err;
@@ -438,9 +430,14 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
 		if (oc_irq < 0)
 			goto err;
 
-		error = devm_request_irq(dev, oc_irq, ohci_da8xx_oc_handler,
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				"OHCI over-current indicator", da8xx_ohci);
+		error = devm_request_threaded_irq(dev, oc_irq,
+						  ohci_da8xx_oc_handler,
+						  ohci_da8xx_oc_thread,
+						  IRQF_TRIGGER_RISING |
+						  IRQF_TRIGGER_FALLING |
+						  IRQF_ONESHOT,
+						  "OHCI over-current indicator",
+						  da8xx_ohci);
 		if (error)
 			goto err;
 	}