[1/4] dt-bindings: usb: dwc2: Document quirk to reset PHY upon wakeup

[Matthias Kaehlcke <mka@chromium.org>]

On Fri, Apr 12, 2019 at 03:41:46PM -0700, Douglas Anderson wrote:
> On Rockchip rk3288 there's a hardware quirk where we need to assert
> the reset signal to the PHY when we get a remote wakeup on one of the
> two ports.  Document this quirk in the bindings.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
> 
>  Documentation/devicetree/bindings/usb/dwc2.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
> index 6dc3c4a34483..f70f3aee4bfc 100644
> --- a/Documentation/devicetree/bindings/usb/dwc2.txt
> +++ b/Documentation/devicetree/bindings/usb/dwc2.txt
> @@ -37,6 +37,8 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
>  - g-rx-fifo-size: size of rx fifo size in gadget mode.
>  - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
>  - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
> +- snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
> +                          we detect a wakeup.  This is due to a hardware errata.
>  
>  Deprecated properties:
>  - g-use-dma: gadget DMA mode is automatically detected

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>