* [v2,1/7] i2c: nvidia-gpu: Supply CCGx driver the fw build info
@ 2019-04-15 12:09 ` Heikki Krogerus
2019-04-15 12:09 ` [PATCH v2 1/7] " Heikki Krogerus
0 siblings, 1 reply; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
From: Ajay Gupta <ajayg@nvidia.com>
Adding device property "ccgx,firmware-build" for the CCGx
device, so the CCGx driver knows which firmware binary to
use for a specific vendor.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/i2c/busses/i2c-nvidia-gpu.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index 4e67d5ed480e..1c8f708f212b 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -253,6 +253,12 @@ static const struct pci_device_id gpu_i2c_ids[] = {
};
MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
+static const struct property_entry ccgx_props[] = {
+ /* Use FW built for NVIDIA (nv) only */
+ PROPERTY_ENTRY_U16("ccgx,firmware-build", ('n' << 8) | 'v'),
+ { }
+};
+
static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
{
struct i2c_client *ccgx_client;
@@ -267,6 +273,7 @@ static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
sizeof(i2cd->gpu_ccgx_ucsi->type));
i2cd->gpu_ccgx_ucsi->addr = 0x8;
i2cd->gpu_ccgx_ucsi->irq = irq;
+ i2cd->gpu_ccgx_ucsi->properties = ccgx_props;
ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
if (!ccgx_client)
return -ENODEV;
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 1/7] i2c: nvidia-gpu: Supply CCGx driver the fw build info
2019-04-15 12:09 ` [v2,1/7] i2c: nvidia-gpu: Supply CCGx driver the fw build info Heikki Krogerus
@ 2019-04-15 12:09 ` Heikki Krogerus
0 siblings, 0 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
From: Ajay Gupta <ajayg@nvidia.com>
Adding device property "ccgx,firmware-build" for the CCGx
device, so the CCGx driver knows which firmware binary to
use for a specific vendor.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/i2c/busses/i2c-nvidia-gpu.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index 4e67d5ed480e..1c8f708f212b 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -253,6 +253,12 @@ static const struct pci_device_id gpu_i2c_ids[] = {
};
MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
+static const struct property_entry ccgx_props[] = {
+ /* Use FW built for NVIDIA (nv) only */
+ PROPERTY_ENTRY_U16("ccgx,firmware-build", ('n' << 8) | 'v'),
+ { }
+};
+
static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
{
struct i2c_client *ccgx_client;
@@ -267,6 +273,7 @@ static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
sizeof(i2cd->gpu_ccgx_ucsi->type));
i2cd->gpu_ccgx_ucsi->addr = 0x8;
i2cd->gpu_ccgx_ucsi->irq = irq;
+ i2cd->gpu_ccgx_ucsi->properties = ccgx_props;
ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
if (!ccgx_client)
return -ENODEV;
--
2.20.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [v2,2/7] usb: typec: ucsi: ccg: add get_fw_info function
@ 2019-04-15 12:09 ` Heikki Krogerus
2019-04-15 12:09 ` [PATCH v2 2/7] " Heikki Krogerus
0 siblings, 1 reply; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
From: Ajay Gupta <ajayg@nvidia.com>
Function is to get the details of ccg firmware and device version.
It will be useful in debugging and also during firmware update.
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/typec/ucsi/ucsi_ccg.c | 66 ++++++++++++++++++++++++++++++-
1 file changed, 64 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index de8a43bdff68..3884fb41c72e 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -17,15 +17,54 @@
#include <asm/unaligned.h>
#include "ucsi.h"
+enum enum_fw_mode {
+ BOOT, /* bootloader */
+ FW1, /* FW partition-1 (contains secondary fw) */
+ FW2, /* FW partition-2 (contains primary fw) */
+ FW_INVALID,
+};
+
+struct ccg_dev_info {
+#define CCG_DEVINFO_FWMODE_SHIFT (0)
+#define CCG_DEVINFO_FWMODE_MASK (0x3 << CCG_DEVINFO_FWMODE_SHIFT)
+#define CCG_DEVINFO_PDPORTS_SHIFT (2)
+#define CCG_DEVINFO_PDPORTS_MASK (0x3 << CCG_DEVINFO_PDPORTS_SHIFT)
+ u8 mode;
+ u8 bl_mode;
+ __le16 silicon_id;
+ __le16 bl_last_row;
+} __packed;
+
+struct version_format {
+ __le16 build;
+ u8 patch;
+ u8 ver;
+#define CCG_VERSION_MIN_SHIFT (0)
+#define CCG_VERSION_MIN_MASK (0xf << CCG_VERSION_MIN_SHIFT)
+#define CCG_VERSION_MAJ_SHIFT (4)
+#define CCG_VERSION_MAJ_MASK (0xf << CCG_VERSION_MAJ_SHIFT)
+} __packed;
+
+struct version_info {
+ struct version_format base;
+ struct version_format app;
+};
+
struct ucsi_ccg {
struct device *dev;
struct ucsi *ucsi;
struct ucsi_ppm ppm;
struct i2c_client *client;
+ struct ccg_dev_info info;
+ /* version info for boot, primary and secondary */
+ struct version_info version[FW2 + 1];
};
-#define CCGX_RAB_INTR_REG 0x06
-#define CCGX_RAB_UCSI_CONTROL 0x39
+#define CCGX_RAB_DEVICE_MODE 0x0000
+#define CCGX_RAB_INTR_REG 0x0006
+#define CCGX_RAB_READ_ALL_VER 0x0010
+#define CCGX_RAB_READ_FW2_VER 0x0020
+#define CCGX_RAB_UCSI_CONTROL 0x0039
#define CCGX_RAB_UCSI_CONTROL_START BIT(0)
#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1)
#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff))
@@ -220,6 +259,23 @@ static irqreturn_t ccg_irq_handler(int irq, void *data)
return IRQ_HANDLED;
}
+static int get_fw_info(struct ucsi_ccg *uc)
+{
+ int err;
+
+ err = ccg_read(uc, CCGX_RAB_READ_ALL_VER, (u8 *)(&uc->version),
+ sizeof(uc->version));
+ if (err < 0)
+ return err;
+
+ err = ccg_read(uc, CCGX_RAB_DEVICE_MODE, (u8 *)(&uc->info),
+ sizeof(uc->info));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
static int ucsi_ccg_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -248,6 +304,12 @@ static int ucsi_ccg_probe(struct i2c_client *client,
return status;
}
+ status = get_fw_info(uc);
+ if (status < 0) {
+ dev_err(uc->dev, "get_fw_info failed - %d\n", status);
+ return status;
+ }
+
status = devm_request_threaded_irq(dev, client->irq, NULL,
ccg_irq_handler,
IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 2/7] usb: typec: ucsi: ccg: add get_fw_info function
2019-04-15 12:09 ` [v2,2/7] usb: typec: ucsi: ccg: add get_fw_info function Heikki Krogerus
@ 2019-04-15 12:09 ` Heikki Krogerus
0 siblings, 0 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
From: Ajay Gupta <ajayg@nvidia.com>
Function is to get the details of ccg firmware and device version.
It will be useful in debugging and also during firmware update.
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/typec/ucsi/ucsi_ccg.c | 66 ++++++++++++++++++++++++++++++-
1 file changed, 64 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index de8a43bdff68..3884fb41c72e 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -17,15 +17,54 @@
#include <asm/unaligned.h>
#include "ucsi.h"
+enum enum_fw_mode {
+ BOOT, /* bootloader */
+ FW1, /* FW partition-1 (contains secondary fw) */
+ FW2, /* FW partition-2 (contains primary fw) */
+ FW_INVALID,
+};
+
+struct ccg_dev_info {
+#define CCG_DEVINFO_FWMODE_SHIFT (0)
+#define CCG_DEVINFO_FWMODE_MASK (0x3 << CCG_DEVINFO_FWMODE_SHIFT)
+#define CCG_DEVINFO_PDPORTS_SHIFT (2)
+#define CCG_DEVINFO_PDPORTS_MASK (0x3 << CCG_DEVINFO_PDPORTS_SHIFT)
+ u8 mode;
+ u8 bl_mode;
+ __le16 silicon_id;
+ __le16 bl_last_row;
+} __packed;
+
+struct version_format {
+ __le16 build;
+ u8 patch;
+ u8 ver;
+#define CCG_VERSION_MIN_SHIFT (0)
+#define CCG_VERSION_MIN_MASK (0xf << CCG_VERSION_MIN_SHIFT)
+#define CCG_VERSION_MAJ_SHIFT (4)
+#define CCG_VERSION_MAJ_MASK (0xf << CCG_VERSION_MAJ_SHIFT)
+} __packed;
+
+struct version_info {
+ struct version_format base;
+ struct version_format app;
+};
+
struct ucsi_ccg {
struct device *dev;
struct ucsi *ucsi;
struct ucsi_ppm ppm;
struct i2c_client *client;
+ struct ccg_dev_info info;
+ /* version info for boot, primary and secondary */
+ struct version_info version[FW2 + 1];
};
-#define CCGX_RAB_INTR_REG 0x06
-#define CCGX_RAB_UCSI_CONTROL 0x39
+#define CCGX_RAB_DEVICE_MODE 0x0000
+#define CCGX_RAB_INTR_REG 0x0006
+#define CCGX_RAB_READ_ALL_VER 0x0010
+#define CCGX_RAB_READ_FW2_VER 0x0020
+#define CCGX_RAB_UCSI_CONTROL 0x0039
#define CCGX_RAB_UCSI_CONTROL_START BIT(0)
#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1)
#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff))
@@ -220,6 +259,23 @@ static irqreturn_t ccg_irq_handler(int irq, void *data)
return IRQ_HANDLED;
}
+static int get_fw_info(struct ucsi_ccg *uc)
+{
+ int err;
+
+ err = ccg_read(uc, CCGX_RAB_READ_ALL_VER, (u8 *)(&uc->version),
+ sizeof(uc->version));
+ if (err < 0)
+ return err;
+
+ err = ccg_read(uc, CCGX_RAB_DEVICE_MODE, (u8 *)(&uc->info),
+ sizeof(uc->info));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
static int ucsi_ccg_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -248,6 +304,12 @@ static int ucsi_ccg_probe(struct i2c_client *client,
return status;
}
+ status = get_fw_info(uc);
+ if (status < 0) {
+ dev_err(uc->dev, "get_fw_info failed - %d\n", status);
+ return status;
+ }
+
status = devm_request_threaded_irq(dev, client->irq, NULL,
ccg_irq_handler,
IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
--
2.20.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [v2,3/7] usb: typec: ucsi: ccg: add firmware flashing support
@ 2019-04-15 12:09 ` Heikki Krogerus
2019-04-15 12:09 ` [PATCH v2 3/7] " Heikki Krogerus
2019-04-16 10:00 ` [v2,3/7] " Greg Kroah-Hartman
0 siblings, 2 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
From: Ajay Gupta <ajayg@nvidia.com>
CCGx has two copies of the firmware in addition to the bootloader.
If the device is running FW1, FW2 can be updated with the new version.
Dual firmware mode allows the CCG device to stay in a PD contract and
support USB PD and Type-C functionality while a firmware update is in
progress.
First we read the currently flashed firmware version of both
primary and secondary firmware and then compare it with
version of firmware file to determine if flashing is required.
Command framework is added to support sending commands to CCGx
controller. We wait for response after sending the command and then
read the response from RAB_RESPONSE register.
Below commands are supported,
- ENTER_FLASHING
- RESET
- PDPORT_ENABLE
- JUMP_TO_BOOT
- FLASH_ROW_RW
- VALIDATE_FW
Command specific mutex lock is also added to sync between driver
and user threads.
PD port number information is added which is required while sending
PD_PORT_ENABLE command
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/typec/ucsi/ucsi_ccg.c | 839 +++++++++++++++++++++++++++++-
1 file changed, 826 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 3884fb41c72e..44cadb5d18d3 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -9,6 +9,7 @@
*/
#include <linux/acpi.h>
#include <linux/delay.h>
+#include <linux/firmware.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -24,6 +25,73 @@ enum enum_fw_mode {
FW_INVALID,
};
+#define CCGX_RAB_DEVICE_MODE 0x0000
+#define CCGX_RAB_INTR_REG 0x0006
+#define DEV_INT BIT(0)
+#define PORT0_INT BIT(1)
+#define PORT1_INT BIT(2)
+#define UCSI_READ_INT BIT(7)
+#define CCGX_RAB_JUMP_TO_BOOT 0x0007
+#define TO_BOOT 'J'
+#define TO_ALT_FW 'A'
+#define CCGX_RAB_RESET_REQ 0x0008
+#define RESET_SIG 'R'
+#define CMD_RESET_I2C 0x0
+#define CMD_RESET_DEV 0x1
+#define CCGX_RAB_ENTER_FLASHING 0x000A
+#define FLASH_ENTER_SIG 'P'
+#define CCGX_RAB_VALIDATE_FW 0x000B
+#define CCGX_RAB_FLASH_ROW_RW 0x000C
+#define FLASH_SIG 'F'
+#define FLASH_RD_CMD 0x0
+#define FLASH_WR_CMD 0x1
+#define FLASH_FWCT1_WR_CMD 0x2
+#define FLASH_FWCT2_WR_CMD 0x3
+#define FLASH_FWCT_SIG_WR_CMD 0x4
+#define CCGX_RAB_READ_ALL_VER 0x0010
+#define CCGX_RAB_READ_FW2_VER 0x0020
+#define CCGX_RAB_UCSI_CONTROL 0x0039
+#define CCGX_RAB_UCSI_CONTROL_START BIT(0)
+#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1)
+#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff))
+#define REG_FLASH_RW_MEM 0x0200
+#define DEV_REG_IDX CCGX_RAB_DEVICE_MODE
+#define CCGX_RAB_PDPORT_ENABLE 0x002C
+#define PDPORT_1 BIT(0)
+#define PDPORT_2 BIT(1)
+#define CCGX_RAB_RESPONSE 0x007E
+#define ASYNC_EVENT BIT(7)
+
+/* CCGx events & async msg codes */
+#define RESET_COMPLETE 0x80
+#define EVENT_INDEX RESET_COMPLETE
+#define PORT_CONNECT_DET 0x84
+#define PORT_DISCONNECT_DET 0x85
+#define ROLE_SWAP_COMPELETE 0x87
+
+/* ccg firmware */
+#define CYACD_LINE_SIZE 527
+#define CCG4_ROW_SIZE 256
+#define FW1_METADATA_ROW 0x1FF
+#define FW2_METADATA_ROW 0x1FE
+#define FW_CFG_TABLE_SIG_SIZE 256
+
+static int secondary_fw_min_ver = 41;
+
+enum enum_flash_mode {
+ SECONDARY_BL, /* update secondary using bootloader */
+ PRIMARY, /* update primary using secondary */
+ SECONDARY, /* update secondary using primary */
+ FLASH_NOT_NEEDED, /* update not required */
+ FLASH_INVALID,
+};
+
+static const char * const ccg_fw_names[] = {
+ "ccg_boot.cyacd",
+ "ccg_primary.cyacd",
+ "ccg_secondary.cyacd"
+};
+
struct ccg_dev_info {
#define CCG_DEVINFO_FWMODE_SHIFT (0)
#define CCG_DEVINFO_FWMODE_MASK (0x3 << CCG_DEVINFO_FWMODE_SHIFT)
@@ -50,6 +118,50 @@ struct version_info {
struct version_format app;
};
+struct fw_config_table {
+ u32 identity;
+ u16 table_size;
+ u8 fwct_version;
+ u8 is_key_change;
+ u8 guid[16];
+ struct version_format base;
+ struct version_format app;
+ u8 primary_fw_digest[32];
+ u32 key_exp_length;
+ u8 key_modulus[256];
+ u8 key_exp[4];
+};
+
+/* CCGx response codes */
+enum ccg_resp_code {
+ CMD_NO_RESP = 0x00,
+ CMD_SUCCESS = 0x02,
+ FLASH_DATA_AVAILABLE = 0x03,
+ CMD_INVALID = 0x05,
+ FLASH_UPDATE_FAIL = 0x07,
+ INVALID_FW = 0x08,
+ INVALID_ARG = 0x09,
+ CMD_NOT_SUPPORT = 0x0A,
+ TRANSACTION_FAIL = 0x0C,
+ PD_CMD_FAIL = 0x0D,
+ UNDEF_ERROR = 0x0F,
+ INVALID_RESP = 0x10,
+};
+
+#define CCG_EVENT_MAX (EVENT_INDEX + 43)
+
+struct ccg_cmd {
+ u16 reg;
+ u32 data;
+ int len;
+ u32 delay; /* ms delay for cmd timeout */
+};
+
+struct ccg_resp {
+ u8 code;
+ u8 length;
+};
+
struct ucsi_ccg {
struct device *dev;
struct ucsi *ucsi;
@@ -58,16 +170,20 @@ struct ucsi_ccg {
struct ccg_dev_info info;
/* version info for boot, primary and secondary */
struct version_info version[FW2 + 1];
-};
+ /* CCG HPI communication flags */
+ unsigned long flags;
+#define RESET_PENDING 0
+#define DEV_CMD_PENDING 1
+ struct ccg_resp dev_resp;
+ u8 cmd_resp;
+ int port_num;
+ int irq;
+ struct work_struct work;
+ struct mutex lock; /* to sync between user and driver thread */
-#define CCGX_RAB_DEVICE_MODE 0x0000
-#define CCGX_RAB_INTR_REG 0x0006
-#define CCGX_RAB_READ_ALL_VER 0x0010
-#define CCGX_RAB_READ_FW2_VER 0x0020
-#define CCGX_RAB_UCSI_CONTROL 0x0039
-#define CCGX_RAB_UCSI_CONTROL_START BIT(0)
-#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1)
-#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff))
+ /* fw build with vendor information */
+ u16 fw_build;
+};
static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
{
@@ -276,6 +392,681 @@ static int get_fw_info(struct ucsi_ccg *uc)
return 0;
}
+static inline bool invalid_async_evt(int code)
+{
+ return (code >= CCG_EVENT_MAX) || (code < EVENT_INDEX);
+}
+
+static void ccg_process_response(struct ucsi_ccg *uc)
+{
+ struct device *dev = uc->dev;
+
+ if (uc->dev_resp.code & ASYNC_EVENT) {
+ if (uc->dev_resp.code == RESET_COMPLETE) {
+ if (test_bit(RESET_PENDING, &uc->flags))
+ uc->cmd_resp = uc->dev_resp.code;
+ get_fw_info(uc);
+ }
+ if (invalid_async_evt(uc->dev_resp.code))
+ dev_err(dev, "invalid async evt %d\n",
+ uc->dev_resp.code);
+ } else {
+ if (test_bit(DEV_CMD_PENDING, &uc->flags)) {
+ uc->cmd_resp = uc->dev_resp.code;
+ clear_bit(DEV_CMD_PENDING, &uc->flags);
+ } else {
+ dev_err(dev, "dev resp 0x%04x but no cmd pending\n",
+ uc->dev_resp.code);
+ }
+ }
+}
+
+static int ccg_read_response(struct ucsi_ccg *uc)
+{
+ unsigned long target = jiffies + msecs_to_jiffies(1000);
+ struct device *dev = uc->dev;
+ u8 intval;
+ int status;
+
+ /* wait for interrupt status to get updated */
+ do {
+ status = ccg_read(uc, CCGX_RAB_INTR_REG, &intval,
+ sizeof(intval));
+ if (status < 0)
+ return status;
+
+ if (intval & DEV_INT)
+ break;
+ usleep_range(500, 600);
+ } while (time_is_after_jiffies(target));
+
+ if (time_is_before_jiffies(target)) {
+ dev_err(dev, "response timeout error\n");
+ return -ETIME;
+ }
+
+ status = ccg_read(uc, CCGX_RAB_RESPONSE, (u8 *)&uc->dev_resp,
+ sizeof(uc->dev_resp));
+ if (status < 0)
+ return status;
+
+ status = ccg_write(uc, CCGX_RAB_INTR_REG, &intval, sizeof(intval));
+ if (status < 0)
+ return status;
+
+ return 0;
+}
+
+/* Caller must hold uc->lock */
+static int ccg_send_command(struct ucsi_ccg *uc, struct ccg_cmd *cmd)
+{
+ struct device *dev = uc->dev;
+ int ret;
+
+ switch (cmd->reg & 0xF000) {
+ case DEV_REG_IDX:
+ set_bit(DEV_CMD_PENDING, &uc->flags);
+ break;
+ default:
+ dev_err(dev, "invalid cmd register\n");
+ break;
+ }
+
+ ret = ccg_write(uc, cmd->reg, (u8 *)&cmd->data, cmd->len);
+ if (ret < 0)
+ return ret;
+
+ msleep(cmd->delay);
+
+ ret = ccg_read_response(uc);
+ if (ret < 0) {
+ dev_err(dev, "response read error\n");
+ switch (cmd->reg & 0xF000) {
+ case DEV_REG_IDX:
+ clear_bit(DEV_CMD_PENDING, &uc->flags);
+ break;
+ default:
+ dev_err(dev, "invalid cmd register\n");
+ break;
+ }
+ return -EIO;
+ }
+ ccg_process_response(uc);
+
+ return uc->cmd_resp;
+}
+
+static int ccg_cmd_enter_flashing(struct ucsi_ccg *uc)
+{
+ struct ccg_cmd cmd;
+ int ret;
+
+ cmd.reg = CCGX_RAB_ENTER_FLASHING;
+ cmd.data = FLASH_ENTER_SIG;
+ cmd.len = 1;
+ cmd.delay = 50;
+
+ mutex_lock(&uc->lock);
+
+ ret = ccg_send_command(uc, &cmd);
+
+ mutex_unlock(&uc->lock);
+
+ if (ret != CMD_SUCCESS) {
+ dev_err(uc->dev, "enter flashing failed ret=%d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ccg_cmd_reset(struct ucsi_ccg *uc)
+{
+ struct ccg_cmd cmd;
+ u8 *p;
+ int ret;
+
+ p = (u8 *)&cmd.data;
+ cmd.reg = CCGX_RAB_RESET_REQ;
+ p[0] = RESET_SIG;
+ p[1] = CMD_RESET_DEV;
+ cmd.len = 2;
+ cmd.delay = 5000;
+
+ mutex_lock(&uc->lock);
+
+ set_bit(RESET_PENDING, &uc->flags);
+
+ ret = ccg_send_command(uc, &cmd);
+ if (ret != RESET_COMPLETE)
+ goto err_clear_flag;
+
+ ret = 0;
+
+err_clear_flag:
+ clear_bit(RESET_PENDING, &uc->flags);
+
+ mutex_unlock(&uc->lock);
+
+ return ret;
+}
+
+static int ccg_cmd_port_control(struct ucsi_ccg *uc, bool enable)
+{
+ struct ccg_cmd cmd;
+ int ret;
+
+ cmd.reg = CCGX_RAB_PDPORT_ENABLE;
+ if (enable)
+ cmd.data = (uc->port_num == 1) ?
+ PDPORT_1 : (PDPORT_1 | PDPORT_2);
+ else
+ cmd.data = 0x0;
+ cmd.len = 1;
+ cmd.delay = 10;
+
+ mutex_lock(&uc->lock);
+
+ ret = ccg_send_command(uc, &cmd);
+
+ mutex_unlock(&uc->lock);
+
+ if (ret != CMD_SUCCESS) {
+ dev_err(uc->dev, "port control failed ret=%d\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int ccg_cmd_jump_boot_mode(struct ucsi_ccg *uc, int bl_mode)
+{
+ struct ccg_cmd cmd;
+ int ret;
+
+ cmd.reg = CCGX_RAB_JUMP_TO_BOOT;
+
+ if (bl_mode)
+ cmd.data = TO_BOOT;
+ else
+ cmd.data = TO_ALT_FW;
+
+ cmd.len = 1;
+ cmd.delay = 100;
+
+ mutex_lock(&uc->lock);
+
+ set_bit(RESET_PENDING, &uc->flags);
+
+ ret = ccg_send_command(uc, &cmd);
+ if (ret != RESET_COMPLETE)
+ goto err_clear_flag;
+
+ ret = 0;
+
+err_clear_flag:
+ clear_bit(RESET_PENDING, &uc->flags);
+
+ mutex_unlock(&uc->lock);
+
+ return ret;
+}
+
+static int
+ccg_cmd_write_flash_row(struct ucsi_ccg *uc, u16 row,
+ const void *data, u8 fcmd)
+{
+ struct i2c_client *client = uc->client;
+ struct ccg_cmd cmd;
+ u8 buf[CCG4_ROW_SIZE + 2];
+ u8 *p;
+ int ret;
+
+ /* Copy the data into the flash read/write memory. */
+ put_unaligned_le16(REG_FLASH_RW_MEM, buf);
+
+ memcpy(buf + 2, data, CCG4_ROW_SIZE);
+
+ mutex_lock(&uc->lock);
+
+ ret = i2c_master_send(client, buf, CCG4_ROW_SIZE + 2);
+ if (ret != CCG4_ROW_SIZE + 2) {
+ dev_err(uc->dev, "REG_FLASH_RW_MEM write fail %d\n", ret);
+ return ret < 0 ? ret : -EIO;
+ }
+
+ /* Use the FLASH_ROW_READ_WRITE register to trigger */
+ /* writing of data to the desired flash row */
+ p = (u8 *)&cmd.data;
+ cmd.reg = CCGX_RAB_FLASH_ROW_RW;
+ p[0] = FLASH_SIG;
+ p[1] = fcmd;
+ put_unaligned_le16(row, &p[2]);
+ cmd.len = 4;
+ cmd.delay = 50;
+ if (fcmd == FLASH_FWCT_SIG_WR_CMD)
+ cmd.delay += 400;
+ if (row == 510)
+ cmd.delay += 220;
+ ret = ccg_send_command(uc, &cmd);
+
+ mutex_unlock(&uc->lock);
+
+ if (ret != CMD_SUCCESS) {
+ dev_err(uc->dev, "write flash row failed ret=%d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ccg_cmd_validate_fw(struct ucsi_ccg *uc, unsigned int fwid)
+{
+ struct ccg_cmd cmd;
+ int ret;
+
+ cmd.reg = CCGX_RAB_VALIDATE_FW;
+ cmd.data = fwid;
+ cmd.len = 1;
+ cmd.delay = 500;
+
+ mutex_lock(&uc->lock);
+
+ ret = ccg_send_command(uc, &cmd);
+
+ mutex_unlock(&uc->lock);
+
+ if (ret != CMD_SUCCESS)
+ return ret;
+
+ return 0;
+}
+
+static bool ccg_check_vendor_version(struct ucsi_ccg *uc,
+ struct version_format *app,
+ struct fw_config_table *fw_cfg)
+{
+ struct device *dev = uc->dev;
+
+ /* Check if the fw build is for supported vendors */
+ if (le16_to_cpu(app->build) != uc->fw_build) {
+ dev_info(dev, "current fw is not from supported vendor\n");
+ return false;
+ }
+
+ /* Check if the new fw build is for supported vendors */
+ if (le16_to_cpu(fw_cfg->app.build) != uc->fw_build) {
+ dev_info(dev, "new fw is not from supported vendor\n");
+ return false;
+ }
+ return true;
+}
+
+static bool ccg_check_fw_version(struct ucsi_ccg *uc, const char *fw_name,
+ struct version_format *app)
+{
+ const struct firmware *fw = NULL;
+ struct device *dev = uc->dev;
+ struct fw_config_table fw_cfg;
+ u32 cur_version, new_version;
+ bool is_later = false;
+
+ if (request_firmware(&fw, fw_name, dev) != 0) {
+ dev_err(dev, "error: Failed to open cyacd file %s\n", fw_name);
+ return false;
+ }
+
+ /*
+ * check if signed fw
+ * last part of fw image is fw cfg table and signature
+ */
+ if (fw->size < sizeof(fw_cfg) + FW_CFG_TABLE_SIG_SIZE)
+ goto out_release_firmware;
+
+ memcpy((uint8_t *)&fw_cfg, fw->data + fw->size -
+ sizeof(fw_cfg) - FW_CFG_TABLE_SIG_SIZE, sizeof(fw_cfg));
+
+ if (fw_cfg.identity != ('F' | 'W' << 8 | 'C' << 16 | 'T' << 24)) {
+ dev_info(dev, "not a signed image\n");
+ goto out_release_firmware;
+ }
+
+ /* compare input version with FWCT version */
+ cur_version = le16_to_cpu(app->build) | app->patch << 16 |
+ app->ver << 24;
+
+ new_version = le16_to_cpu(fw_cfg.app.build) | fw_cfg.app.patch << 16 |
+ fw_cfg.app.ver << 24;
+
+ if (!ccg_check_vendor_version(uc, app, &fw_cfg))
+ goto out_release_firmware;
+
+ if (new_version > cur_version)
+ is_later = true;
+
+out_release_firmware:
+ release_firmware(fw);
+ return is_later;
+}
+
+static int ccg_fw_update_needed(struct ucsi_ccg *uc,
+ enum enum_flash_mode *mode)
+{
+ struct device *dev = uc->dev;
+ int err;
+ struct version_info version[3];
+
+ err = ccg_read(uc, CCGX_RAB_DEVICE_MODE, (u8 *)(&uc->info),
+ sizeof(uc->info));
+ if (err) {
+ dev_err(dev, "read device mode failed\n");
+ return err;
+ }
+
+ err = ccg_read(uc, CCGX_RAB_READ_ALL_VER, (u8 *)version,
+ sizeof(version));
+ if (err) {
+ dev_err(dev, "read device mode failed\n");
+ return err;
+ }
+
+ if (memcmp(&version[FW1], "\0\0\0\0\0\0\0\0",
+ sizeof(struct version_info)) == 0) {
+ dev_info(dev, "secondary fw is not flashed\n");
+ *mode = SECONDARY_BL;
+ } else if (le16_to_cpu(version[FW1].base.build) <
+ secondary_fw_min_ver) {
+ dev_info(dev, "secondary fw version is too low (< %d)\n",
+ secondary_fw_min_ver);
+ *mode = SECONDARY;
+ } else if (memcmp(&version[FW2], "\0\0\0\0\0\0\0\0",
+ sizeof(struct version_info)) == 0) {
+ dev_info(dev, "primary fw is not flashed\n");
+ *mode = PRIMARY;
+ } else if (ccg_check_fw_version(uc, ccg_fw_names[PRIMARY],
+ &version[FW2].app)) {
+ dev_info(dev, "found primary fw with later version\n");
+ *mode = PRIMARY;
+ } else {
+ dev_info(dev, "secondary and primary fw are the latest\n");
+ *mode = FLASH_NOT_NEEDED;
+ }
+ return 0;
+}
+
+static int do_flash(struct ucsi_ccg *uc, enum enum_flash_mode mode)
+{
+ struct device *dev = uc->dev;
+ const struct firmware *fw = NULL;
+ const char *p, *s;
+ const char *eof;
+ int err, row, len, line_sz, line_cnt = 0;
+ unsigned long start_time = jiffies;
+ struct fw_config_table fw_cfg;
+ u8 fw_cfg_sig[FW_CFG_TABLE_SIG_SIZE];
+ u8 *wr_buf;
+
+ err = request_firmware(&fw, ccg_fw_names[mode], dev);
+ if (err) {
+ dev_err(dev, "request %s failed err=%d\n",
+ ccg_fw_names[mode], err);
+ return err;
+ }
+
+ if (((uc->info.mode & CCG_DEVINFO_FWMODE_MASK) >>
+ CCG_DEVINFO_FWMODE_SHIFT) == FW2) {
+ err = ccg_cmd_port_control(uc, false);
+ if (err < 0)
+ goto release_fw;
+ err = ccg_cmd_jump_boot_mode(uc, 0);
+ if (err < 0)
+ goto release_fw;
+ }
+
+ eof = fw->data + fw->size;
+
+ /*
+ * check if signed fw
+ * last part of fw image is fw cfg table and signature
+ */
+ if (fw->size < sizeof(fw_cfg) + sizeof(fw_cfg_sig))
+ goto not_signed_fw;
+
+ memcpy((uint8_t *)&fw_cfg, fw->data + fw->size -
+ sizeof(fw_cfg) - sizeof(fw_cfg_sig), sizeof(fw_cfg));
+
+ if (fw_cfg.identity != ('F' | ('W' << 8) | ('C' << 16) | ('T' << 24))) {
+ dev_info(dev, "not a signed image\n");
+ goto not_signed_fw;
+ }
+ eof = fw->data + fw->size - sizeof(fw_cfg) - sizeof(fw_cfg_sig);
+
+ memcpy((uint8_t *)&fw_cfg_sig,
+ fw->data + fw->size - sizeof(fw_cfg_sig), sizeof(fw_cfg_sig));
+
+ /* flash fw config table and signature first */
+ err = ccg_cmd_write_flash_row(uc, 0, (u8 *)&fw_cfg,
+ FLASH_FWCT1_WR_CMD);
+ if (err)
+ goto release_fw;
+
+ err = ccg_cmd_write_flash_row(uc, 0, (u8 *)&fw_cfg + CCG4_ROW_SIZE,
+ FLASH_FWCT2_WR_CMD);
+ if (err)
+ goto release_fw;
+
+ err = ccg_cmd_write_flash_row(uc, 0, &fw_cfg_sig,
+ FLASH_FWCT_SIG_WR_CMD);
+ if (err)
+ goto release_fw;
+
+not_signed_fw:
+ wr_buf = kzalloc(CCG4_ROW_SIZE + 4, GFP_KERNEL);
+ if (!wr_buf)
+ return -ENOMEM;
+
+ err = ccg_cmd_enter_flashing(uc);
+ if (err)
+ goto release_mem;
+
+ /*****************************************************************
+ * CCG firmware image (.cyacd) file line format
+ *
+ * :00rrrrllll[dd....]cc/r/n
+ *
+ * :00 header
+ * rrrr is row number to flash (4 char)
+ * llll is data len to flash (4 char)
+ * dd is a data field represents one byte of data (512 char)
+ * cc is checksum (2 char)
+ * \r\n newline
+ *
+ * Total length: 3 + 4 + 4 + 512 + 2 + 2 = 527
+ *
+ *****************************************************************/
+
+ p = strnchr(fw->data, fw->size, ':');
+ while (p < eof) {
+ s = strnchr(p + 1, eof - p - 1, ':');
+
+ if (!s)
+ s = eof;
+
+ line_sz = s - p;
+
+ if (line_sz != CYACD_LINE_SIZE) {
+ dev_err(dev, "Bad FW format line_sz=%d\n", line_sz);
+ err = -EINVAL;
+ goto release_mem;
+ }
+
+ if (hex2bin(wr_buf, p + 3, CCG4_ROW_SIZE + 4)) {
+ err = -EINVAL;
+ goto release_mem;
+ }
+
+ row = get_unaligned_be16(wr_buf);
+ len = get_unaligned_be16(&wr_buf[2]);
+
+ if (len != CCG4_ROW_SIZE) {
+ err = -EINVAL;
+ goto release_mem;
+ }
+
+ err = ccg_cmd_write_flash_row(uc, row, wr_buf + 4,
+ FLASH_WR_CMD);
+ if (err)
+ goto release_mem;
+
+ line_cnt++;
+ p = s;
+ }
+
+ dev_info(dev, "total %d row flashed. time: %dms\n",
+ line_cnt, jiffies_to_msecs(jiffies - start_time));
+
+ err = ccg_cmd_validate_fw(uc, (mode == PRIMARY) ? FW2 : FW1);
+ if (err)
+ dev_err(dev, "%s validation failed err=%d\n",
+ (mode == PRIMARY) ? "FW2" : "FW1", err);
+ else
+ dev_info(dev, "%s validated\n",
+ (mode == PRIMARY) ? "FW2" : "FW1");
+
+ err = ccg_cmd_port_control(uc, false);
+ if (err < 0)
+ goto release_mem;
+
+ err = ccg_cmd_reset(uc);
+ if (err < 0)
+ goto release_mem;
+
+ err = ccg_cmd_port_control(uc, true);
+ if (err < 0)
+ goto release_mem;
+
+release_mem:
+ kfree(wr_buf);
+
+release_fw:
+ release_firmware(fw);
+ return err;
+}
+
+/*******************************************************************************
+ * CCG4 has two copies of the firmware in addition to the bootloader.
+ * If the device is running FW1, FW2 can be updated with the new version.
+ * Dual firmware mode allows the CCG device to stay in a PD contract and support
+ * USB PD and Type-C functionality while a firmware update is in progress.
+ ******************************************************************************/
+static int ccg_fw_update(struct ucsi_ccg *uc, enum enum_flash_mode flash_mode)
+{
+ int err;
+
+ while (flash_mode != FLASH_NOT_NEEDED) {
+ err = do_flash(uc, flash_mode);
+ if (err < 0)
+ return err;
+ err = ccg_fw_update_needed(uc, &flash_mode);
+ if (err < 0)
+ return err;
+ }
+ dev_info(uc->dev, "CCG FW update successful\n");
+
+ return err;
+}
+
+static int ccg_restart(struct ucsi_ccg *uc)
+{
+ struct device *dev = uc->dev;
+ int status;
+
+ status = ucsi_ccg_init(uc);
+ if (status < 0) {
+ dev_err(dev, "ucsi_ccg_start fail, err=%d\n", status);
+ return status;
+ }
+
+ status = request_threaded_irq(uc->irq, NULL, ccg_irq_handler,
+ IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+ dev_name(dev), uc);
+ if (status < 0) {
+ dev_err(dev, "request_threaded_irq failed - %d\n", status);
+ return status;
+ }
+
+ uc->ucsi = ucsi_register_ppm(dev, &uc->ppm);
+ if (IS_ERR(uc->ucsi)) {
+ dev_err(uc->dev, "ucsi_register_ppm failed\n");
+ return PTR_ERR(uc->ucsi);
+ }
+
+ return 0;
+}
+
+static void ccg_update_firmware(struct work_struct *work)
+{
+ struct ucsi_ccg *uc = container_of(work, struct ucsi_ccg, work);
+ enum enum_flash_mode flash_mode;
+ int status;
+
+ status = ccg_fw_update_needed(uc, &flash_mode);
+ if (status < 0)
+ return;
+
+ if (flash_mode != FLASH_NOT_NEEDED) {
+ ucsi_unregister_ppm(uc->ucsi);
+ free_irq(uc->irq, uc);
+
+ ccg_fw_update(uc, flash_mode);
+ ccg_restart(uc);
+ }
+}
+
+static ssize_t do_flash_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ struct i2c_client *i2c_cl = to_i2c_client(dev);
+ struct ucsi_ccg *uc = i2c_get_clientdata(i2c_cl);
+ unsigned int mode;
+
+ if (kstrtouint(buf, 10, &mode))
+ return -EINVAL;
+
+ if (uc->fw_build == 0x0) {
+ dev_err(dev, "fail to flash FW due to missing FW build info");
+ return -EINVAL;
+ }
+
+ if (mode)
+ schedule_work(&uc->work);
+
+ return n;
+}
+
+static ssize_t do_flash_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "[Usage]\n"
+ "1) copy ccg_boot.cyacd /lib/firmware/\n"
+ "2) copy ccg_primary.cyacd /lib/firmware/\n"
+ "3) copy ccg_secondary.cyacd /lib/firmware/\n"
+ "4) echo 1 > do_flash\n");
+}
+
+static DEVICE_ATTR_RW(do_flash);
+
+static struct attribute *
+ucsi_ccg_sysfs_attrs[] = {
+ &dev_attr_do_flash.attr,
+ NULL,
+};
+
+static struct attribute_group
+ucsi_ccg_attr_group = {
+ .attrs = ucsi_ccg_sysfs_attrs,
+};
+
static int ucsi_ccg_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -296,6 +1087,14 @@ static int ucsi_ccg_probe(struct i2c_client *client,
uc->ppm.sync = ucsi_ccg_sync;
uc->dev = dev;
uc->client = client;
+ mutex_init(&uc->lock);
+ INIT_WORK(&uc->work, ccg_update_firmware);
+
+ /* Only fail FW flashing when FW build information is not provided */
+ status = device_property_read_u16(dev, "ccgx,firmware-build",
+ &uc->fw_build);
+ if (status)
+ dev_err(uc->dev, "failed to get FW build information\n");
/* reset ccg device and initialize ucsi */
status = ucsi_ccg_init(uc);
@@ -310,15 +1109,21 @@ static int ucsi_ccg_probe(struct i2c_client *client,
return status;
}
- status = devm_request_threaded_irq(dev, client->irq, NULL,
- ccg_irq_handler,
- IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
- dev_name(dev), uc);
+ uc->port_num = 1;
+
+ if (uc->info.mode & CCG_DEVINFO_PDPORTS_MASK)
+ uc->port_num++;
+
+ status = request_threaded_irq(client->irq, NULL, ccg_irq_handler,
+ IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+ dev_name(dev), uc);
if (status < 0) {
dev_err(uc->dev, "request_threaded_irq failed - %d\n", status);
return status;
}
+ uc->irq = client->irq;
+
uc->ucsi = ucsi_register_ppm(dev, &uc->ppm);
if (IS_ERR(uc->ucsi)) {
dev_err(uc->dev, "ucsi_register_ppm failed\n");
@@ -335,6 +1140,11 @@ static int ucsi_ccg_probe(struct i2c_client *client,
}
i2c_set_clientdata(client, uc);
+
+ status = sysfs_create_group(&uc->dev->kobj, &ucsi_ccg_attr_group);
+ if (status)
+ dev_err(uc->dev, "cannot create sysfs group: %d\n", status);
+
return 0;
}
@@ -342,7 +1152,10 @@ static int ucsi_ccg_remove(struct i2c_client *client)
{
struct ucsi_ccg *uc = i2c_get_clientdata(client);
+ cancel_work_sync(&uc->work);
ucsi_unregister_ppm(uc->ucsi);
+ free_irq(uc->irq, uc);
+ sysfs_remove_group(&uc->dev->kobj, &ucsi_ccg_attr_group);
return 0;
}
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 3/7] usb: typec: ucsi: ccg: add firmware flashing support
2019-04-15 12:09 ` [v2,3/7] usb: typec: ucsi: ccg: add firmware flashing support Heikki Krogerus
@ 2019-04-15 12:09 ` Heikki Krogerus
2019-04-16 10:00 ` [v2,3/7] " Greg Kroah-Hartman
1 sibling, 0 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
From: Ajay Gupta <ajayg@nvidia.com>
CCGx has two copies of the firmware in addition to the bootloader.
If the device is running FW1, FW2 can be updated with the new version.
Dual firmware mode allows the CCG device to stay in a PD contract and
support USB PD and Type-C functionality while a firmware update is in
progress.
First we read the currently flashed firmware version of both
primary and secondary firmware and then compare it with
version of firmware file to determine if flashing is required.
Command framework is added to support sending commands to CCGx
controller. We wait for response after sending the command and then
read the response from RAB_RESPONSE register.
Below commands are supported,
- ENTER_FLASHING
- RESET
- PDPORT_ENABLE
- JUMP_TO_BOOT
- FLASH_ROW_RW
- VALIDATE_FW
Command specific mutex lock is also added to sync between driver
and user threads.
PD port number information is added which is required while sending
PD_PORT_ENABLE command
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/typec/ucsi/ucsi_ccg.c | 839 +++++++++++++++++++++++++++++-
1 file changed, 826 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 3884fb41c72e..44cadb5d18d3 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -9,6 +9,7 @@
*/
#include <linux/acpi.h>
#include <linux/delay.h>
+#include <linux/firmware.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -24,6 +25,73 @@ enum enum_fw_mode {
FW_INVALID,
};
+#define CCGX_RAB_DEVICE_MODE 0x0000
+#define CCGX_RAB_INTR_REG 0x0006
+#define DEV_INT BIT(0)
+#define PORT0_INT BIT(1)
+#define PORT1_INT BIT(2)
+#define UCSI_READ_INT BIT(7)
+#define CCGX_RAB_JUMP_TO_BOOT 0x0007
+#define TO_BOOT 'J'
+#define TO_ALT_FW 'A'
+#define CCGX_RAB_RESET_REQ 0x0008
+#define RESET_SIG 'R'
+#define CMD_RESET_I2C 0x0
+#define CMD_RESET_DEV 0x1
+#define CCGX_RAB_ENTER_FLASHING 0x000A
+#define FLASH_ENTER_SIG 'P'
+#define CCGX_RAB_VALIDATE_FW 0x000B
+#define CCGX_RAB_FLASH_ROW_RW 0x000C
+#define FLASH_SIG 'F'
+#define FLASH_RD_CMD 0x0
+#define FLASH_WR_CMD 0x1
+#define FLASH_FWCT1_WR_CMD 0x2
+#define FLASH_FWCT2_WR_CMD 0x3
+#define FLASH_FWCT_SIG_WR_CMD 0x4
+#define CCGX_RAB_READ_ALL_VER 0x0010
+#define CCGX_RAB_READ_FW2_VER 0x0020
+#define CCGX_RAB_UCSI_CONTROL 0x0039
+#define CCGX_RAB_UCSI_CONTROL_START BIT(0)
+#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1)
+#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff))
+#define REG_FLASH_RW_MEM 0x0200
+#define DEV_REG_IDX CCGX_RAB_DEVICE_MODE
+#define CCGX_RAB_PDPORT_ENABLE 0x002C
+#define PDPORT_1 BIT(0)
+#define PDPORT_2 BIT(1)
+#define CCGX_RAB_RESPONSE 0x007E
+#define ASYNC_EVENT BIT(7)
+
+/* CCGx events & async msg codes */
+#define RESET_COMPLETE 0x80
+#define EVENT_INDEX RESET_COMPLETE
+#define PORT_CONNECT_DET 0x84
+#define PORT_DISCONNECT_DET 0x85
+#define ROLE_SWAP_COMPELETE 0x87
+
+/* ccg firmware */
+#define CYACD_LINE_SIZE 527
+#define CCG4_ROW_SIZE 256
+#define FW1_METADATA_ROW 0x1FF
+#define FW2_METADATA_ROW 0x1FE
+#define FW_CFG_TABLE_SIG_SIZE 256
+
+static int secondary_fw_min_ver = 41;
+
+enum enum_flash_mode {
+ SECONDARY_BL, /* update secondary using bootloader */
+ PRIMARY, /* update primary using secondary */
+ SECONDARY, /* update secondary using primary */
+ FLASH_NOT_NEEDED, /* update not required */
+ FLASH_INVALID,
+};
+
+static const char * const ccg_fw_names[] = {
+ "ccg_boot.cyacd",
+ "ccg_primary.cyacd",
+ "ccg_secondary.cyacd"
+};
+
struct ccg_dev_info {
#define CCG_DEVINFO_FWMODE_SHIFT (0)
#define CCG_DEVINFO_FWMODE_MASK (0x3 << CCG_DEVINFO_FWMODE_SHIFT)
@@ -50,6 +118,50 @@ struct version_info {
struct version_format app;
};
+struct fw_config_table {
+ u32 identity;
+ u16 table_size;
+ u8 fwct_version;
+ u8 is_key_change;
+ u8 guid[16];
+ struct version_format base;
+ struct version_format app;
+ u8 primary_fw_digest[32];
+ u32 key_exp_length;
+ u8 key_modulus[256];
+ u8 key_exp[4];
+};
+
+/* CCGx response codes */
+enum ccg_resp_code {
+ CMD_NO_RESP = 0x00,
+ CMD_SUCCESS = 0x02,
+ FLASH_DATA_AVAILABLE = 0x03,
+ CMD_INVALID = 0x05,
+ FLASH_UPDATE_FAIL = 0x07,
+ INVALID_FW = 0x08,
+ INVALID_ARG = 0x09,
+ CMD_NOT_SUPPORT = 0x0A,
+ TRANSACTION_FAIL = 0x0C,
+ PD_CMD_FAIL = 0x0D,
+ UNDEF_ERROR = 0x0F,
+ INVALID_RESP = 0x10,
+};
+
+#define CCG_EVENT_MAX (EVENT_INDEX + 43)
+
+struct ccg_cmd {
+ u16 reg;
+ u32 data;
+ int len;
+ u32 delay; /* ms delay for cmd timeout */
+};
+
+struct ccg_resp {
+ u8 code;
+ u8 length;
+};
+
struct ucsi_ccg {
struct device *dev;
struct ucsi *ucsi;
@@ -58,16 +170,20 @@ struct ucsi_ccg {
struct ccg_dev_info info;
/* version info for boot, primary and secondary */
struct version_info version[FW2 + 1];
-};
+ /* CCG HPI communication flags */
+ unsigned long flags;
+#define RESET_PENDING 0
+#define DEV_CMD_PENDING 1
+ struct ccg_resp dev_resp;
+ u8 cmd_resp;
+ int port_num;
+ int irq;
+ struct work_struct work;
+ struct mutex lock; /* to sync between user and driver thread */
-#define CCGX_RAB_DEVICE_MODE 0x0000
-#define CCGX_RAB_INTR_REG 0x0006
-#define CCGX_RAB_READ_ALL_VER 0x0010
-#define CCGX_RAB_READ_FW2_VER 0x0020
-#define CCGX_RAB_UCSI_CONTROL 0x0039
-#define CCGX_RAB_UCSI_CONTROL_START BIT(0)
-#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1)
-#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff))
+ /* fw build with vendor information */
+ u16 fw_build;
+};
static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
{
@@ -276,6 +392,681 @@ static int get_fw_info(struct ucsi_ccg *uc)
return 0;
}
+static inline bool invalid_async_evt(int code)
+{
+ return (code >= CCG_EVENT_MAX) || (code < EVENT_INDEX);
+}
+
+static void ccg_process_response(struct ucsi_ccg *uc)
+{
+ struct device *dev = uc->dev;
+
+ if (uc->dev_resp.code & ASYNC_EVENT) {
+ if (uc->dev_resp.code == RESET_COMPLETE) {
+ if (test_bit(RESET_PENDING, &uc->flags))
+ uc->cmd_resp = uc->dev_resp.code;
+ get_fw_info(uc);
+ }
+ if (invalid_async_evt(uc->dev_resp.code))
+ dev_err(dev, "invalid async evt %d\n",
+ uc->dev_resp.code);
+ } else {
+ if (test_bit(DEV_CMD_PENDING, &uc->flags)) {
+ uc->cmd_resp = uc->dev_resp.code;
+ clear_bit(DEV_CMD_PENDING, &uc->flags);
+ } else {
+ dev_err(dev, "dev resp 0x%04x but no cmd pending\n",
+ uc->dev_resp.code);
+ }
+ }
+}
+
+static int ccg_read_response(struct ucsi_ccg *uc)
+{
+ unsigned long target = jiffies + msecs_to_jiffies(1000);
+ struct device *dev = uc->dev;
+ u8 intval;
+ int status;
+
+ /* wait for interrupt status to get updated */
+ do {
+ status = ccg_read(uc, CCGX_RAB_INTR_REG, &intval,
+ sizeof(intval));
+ if (status < 0)
+ return status;
+
+ if (intval & DEV_INT)
+ break;
+ usleep_range(500, 600);
+ } while (time_is_after_jiffies(target));
+
+ if (time_is_before_jiffies(target)) {
+ dev_err(dev, "response timeout error\n");
+ return -ETIME;
+ }
+
+ status = ccg_read(uc, CCGX_RAB_RESPONSE, (u8 *)&uc->dev_resp,
+ sizeof(uc->dev_resp));
+ if (status < 0)
+ return status;
+
+ status = ccg_write(uc, CCGX_RAB_INTR_REG, &intval, sizeof(intval));
+ if (status < 0)
+ return status;
+
+ return 0;
+}
+
+/* Caller must hold uc->lock */
+static int ccg_send_command(struct ucsi_ccg *uc, struct ccg_cmd *cmd)
+{
+ struct device *dev = uc->dev;
+ int ret;
+
+ switch (cmd->reg & 0xF000) {
+ case DEV_REG_IDX:
+ set_bit(DEV_CMD_PENDING, &uc->flags);
+ break;
+ default:
+ dev_err(dev, "invalid cmd register\n");
+ break;
+ }
+
+ ret = ccg_write(uc, cmd->reg, (u8 *)&cmd->data, cmd->len);
+ if (ret < 0)
+ return ret;
+
+ msleep(cmd->delay);
+
+ ret = ccg_read_response(uc);
+ if (ret < 0) {
+ dev_err(dev, "response read error\n");
+ switch (cmd->reg & 0xF000) {
+ case DEV_REG_IDX:
+ clear_bit(DEV_CMD_PENDING, &uc->flags);
+ break;
+ default:
+ dev_err(dev, "invalid cmd register\n");
+ break;
+ }
+ return -EIO;
+ }
+ ccg_process_response(uc);
+
+ return uc->cmd_resp;
+}
+
+static int ccg_cmd_enter_flashing(struct ucsi_ccg *uc)
+{
+ struct ccg_cmd cmd;
+ int ret;
+
+ cmd.reg = CCGX_RAB_ENTER_FLASHING;
+ cmd.data = FLASH_ENTER_SIG;
+ cmd.len = 1;
+ cmd.delay = 50;
+
+ mutex_lock(&uc->lock);
+
+ ret = ccg_send_command(uc, &cmd);
+
+ mutex_unlock(&uc->lock);
+
+ if (ret != CMD_SUCCESS) {
+ dev_err(uc->dev, "enter flashing failed ret=%d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ccg_cmd_reset(struct ucsi_ccg *uc)
+{
+ struct ccg_cmd cmd;
+ u8 *p;
+ int ret;
+
+ p = (u8 *)&cmd.data;
+ cmd.reg = CCGX_RAB_RESET_REQ;
+ p[0] = RESET_SIG;
+ p[1] = CMD_RESET_DEV;
+ cmd.len = 2;
+ cmd.delay = 5000;
+
+ mutex_lock(&uc->lock);
+
+ set_bit(RESET_PENDING, &uc->flags);
+
+ ret = ccg_send_command(uc, &cmd);
+ if (ret != RESET_COMPLETE)
+ goto err_clear_flag;
+
+ ret = 0;
+
+err_clear_flag:
+ clear_bit(RESET_PENDING, &uc->flags);
+
+ mutex_unlock(&uc->lock);
+
+ return ret;
+}
+
+static int ccg_cmd_port_control(struct ucsi_ccg *uc, bool enable)
+{
+ struct ccg_cmd cmd;
+ int ret;
+
+ cmd.reg = CCGX_RAB_PDPORT_ENABLE;
+ if (enable)
+ cmd.data = (uc->port_num == 1) ?
+ PDPORT_1 : (PDPORT_1 | PDPORT_2);
+ else
+ cmd.data = 0x0;
+ cmd.len = 1;
+ cmd.delay = 10;
+
+ mutex_lock(&uc->lock);
+
+ ret = ccg_send_command(uc, &cmd);
+
+ mutex_unlock(&uc->lock);
+
+ if (ret != CMD_SUCCESS) {
+ dev_err(uc->dev, "port control failed ret=%d\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int ccg_cmd_jump_boot_mode(struct ucsi_ccg *uc, int bl_mode)
+{
+ struct ccg_cmd cmd;
+ int ret;
+
+ cmd.reg = CCGX_RAB_JUMP_TO_BOOT;
+
+ if (bl_mode)
+ cmd.data = TO_BOOT;
+ else
+ cmd.data = TO_ALT_FW;
+
+ cmd.len = 1;
+ cmd.delay = 100;
+
+ mutex_lock(&uc->lock);
+
+ set_bit(RESET_PENDING, &uc->flags);
+
+ ret = ccg_send_command(uc, &cmd);
+ if (ret != RESET_COMPLETE)
+ goto err_clear_flag;
+
+ ret = 0;
+
+err_clear_flag:
+ clear_bit(RESET_PENDING, &uc->flags);
+
+ mutex_unlock(&uc->lock);
+
+ return ret;
+}
+
+static int
+ccg_cmd_write_flash_row(struct ucsi_ccg *uc, u16 row,
+ const void *data, u8 fcmd)
+{
+ struct i2c_client *client = uc->client;
+ struct ccg_cmd cmd;
+ u8 buf[CCG4_ROW_SIZE + 2];
+ u8 *p;
+ int ret;
+
+ /* Copy the data into the flash read/write memory. */
+ put_unaligned_le16(REG_FLASH_RW_MEM, buf);
+
+ memcpy(buf + 2, data, CCG4_ROW_SIZE);
+
+ mutex_lock(&uc->lock);
+
+ ret = i2c_master_send(client, buf, CCG4_ROW_SIZE + 2);
+ if (ret != CCG4_ROW_SIZE + 2) {
+ dev_err(uc->dev, "REG_FLASH_RW_MEM write fail %d\n", ret);
+ return ret < 0 ? ret : -EIO;
+ }
+
+ /* Use the FLASH_ROW_READ_WRITE register to trigger */
+ /* writing of data to the desired flash row */
+ p = (u8 *)&cmd.data;
+ cmd.reg = CCGX_RAB_FLASH_ROW_RW;
+ p[0] = FLASH_SIG;
+ p[1] = fcmd;
+ put_unaligned_le16(row, &p[2]);
+ cmd.len = 4;
+ cmd.delay = 50;
+ if (fcmd == FLASH_FWCT_SIG_WR_CMD)
+ cmd.delay += 400;
+ if (row == 510)
+ cmd.delay += 220;
+ ret = ccg_send_command(uc, &cmd);
+
+ mutex_unlock(&uc->lock);
+
+ if (ret != CMD_SUCCESS) {
+ dev_err(uc->dev, "write flash row failed ret=%d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ccg_cmd_validate_fw(struct ucsi_ccg *uc, unsigned int fwid)
+{
+ struct ccg_cmd cmd;
+ int ret;
+
+ cmd.reg = CCGX_RAB_VALIDATE_FW;
+ cmd.data = fwid;
+ cmd.len = 1;
+ cmd.delay = 500;
+
+ mutex_lock(&uc->lock);
+
+ ret = ccg_send_command(uc, &cmd);
+
+ mutex_unlock(&uc->lock);
+
+ if (ret != CMD_SUCCESS)
+ return ret;
+
+ return 0;
+}
+
+static bool ccg_check_vendor_version(struct ucsi_ccg *uc,
+ struct version_format *app,
+ struct fw_config_table *fw_cfg)
+{
+ struct device *dev = uc->dev;
+
+ /* Check if the fw build is for supported vendors */
+ if (le16_to_cpu(app->build) != uc->fw_build) {
+ dev_info(dev, "current fw is not from supported vendor\n");
+ return false;
+ }
+
+ /* Check if the new fw build is for supported vendors */
+ if (le16_to_cpu(fw_cfg->app.build) != uc->fw_build) {
+ dev_info(dev, "new fw is not from supported vendor\n");
+ return false;
+ }
+ return true;
+}
+
+static bool ccg_check_fw_version(struct ucsi_ccg *uc, const char *fw_name,
+ struct version_format *app)
+{
+ const struct firmware *fw = NULL;
+ struct device *dev = uc->dev;
+ struct fw_config_table fw_cfg;
+ u32 cur_version, new_version;
+ bool is_later = false;
+
+ if (request_firmware(&fw, fw_name, dev) != 0) {
+ dev_err(dev, "error: Failed to open cyacd file %s\n", fw_name);
+ return false;
+ }
+
+ /*
+ * check if signed fw
+ * last part of fw image is fw cfg table and signature
+ */
+ if (fw->size < sizeof(fw_cfg) + FW_CFG_TABLE_SIG_SIZE)
+ goto out_release_firmware;
+
+ memcpy((uint8_t *)&fw_cfg, fw->data + fw->size -
+ sizeof(fw_cfg) - FW_CFG_TABLE_SIG_SIZE, sizeof(fw_cfg));
+
+ if (fw_cfg.identity != ('F' | 'W' << 8 | 'C' << 16 | 'T' << 24)) {
+ dev_info(dev, "not a signed image\n");
+ goto out_release_firmware;
+ }
+
+ /* compare input version with FWCT version */
+ cur_version = le16_to_cpu(app->build) | app->patch << 16 |
+ app->ver << 24;
+
+ new_version = le16_to_cpu(fw_cfg.app.build) | fw_cfg.app.patch << 16 |
+ fw_cfg.app.ver << 24;
+
+ if (!ccg_check_vendor_version(uc, app, &fw_cfg))
+ goto out_release_firmware;
+
+ if (new_version > cur_version)
+ is_later = true;
+
+out_release_firmware:
+ release_firmware(fw);
+ return is_later;
+}
+
+static int ccg_fw_update_needed(struct ucsi_ccg *uc,
+ enum enum_flash_mode *mode)
+{
+ struct device *dev = uc->dev;
+ int err;
+ struct version_info version[3];
+
+ err = ccg_read(uc, CCGX_RAB_DEVICE_MODE, (u8 *)(&uc->info),
+ sizeof(uc->info));
+ if (err) {
+ dev_err(dev, "read device mode failed\n");
+ return err;
+ }
+
+ err = ccg_read(uc, CCGX_RAB_READ_ALL_VER, (u8 *)version,
+ sizeof(version));
+ if (err) {
+ dev_err(dev, "read device mode failed\n");
+ return err;
+ }
+
+ if (memcmp(&version[FW1], "\0\0\0\0\0\0\0\0",
+ sizeof(struct version_info)) == 0) {
+ dev_info(dev, "secondary fw is not flashed\n");
+ *mode = SECONDARY_BL;
+ } else if (le16_to_cpu(version[FW1].base.build) <
+ secondary_fw_min_ver) {
+ dev_info(dev, "secondary fw version is too low (< %d)\n",
+ secondary_fw_min_ver);
+ *mode = SECONDARY;
+ } else if (memcmp(&version[FW2], "\0\0\0\0\0\0\0\0",
+ sizeof(struct version_info)) == 0) {
+ dev_info(dev, "primary fw is not flashed\n");
+ *mode = PRIMARY;
+ } else if (ccg_check_fw_version(uc, ccg_fw_names[PRIMARY],
+ &version[FW2].app)) {
+ dev_info(dev, "found primary fw with later version\n");
+ *mode = PRIMARY;
+ } else {
+ dev_info(dev, "secondary and primary fw are the latest\n");
+ *mode = FLASH_NOT_NEEDED;
+ }
+ return 0;
+}
+
+static int do_flash(struct ucsi_ccg *uc, enum enum_flash_mode mode)
+{
+ struct device *dev = uc->dev;
+ const struct firmware *fw = NULL;
+ const char *p, *s;
+ const char *eof;
+ int err, row, len, line_sz, line_cnt = 0;
+ unsigned long start_time = jiffies;
+ struct fw_config_table fw_cfg;
+ u8 fw_cfg_sig[FW_CFG_TABLE_SIG_SIZE];
+ u8 *wr_buf;
+
+ err = request_firmware(&fw, ccg_fw_names[mode], dev);
+ if (err) {
+ dev_err(dev, "request %s failed err=%d\n",
+ ccg_fw_names[mode], err);
+ return err;
+ }
+
+ if (((uc->info.mode & CCG_DEVINFO_FWMODE_MASK) >>
+ CCG_DEVINFO_FWMODE_SHIFT) == FW2) {
+ err = ccg_cmd_port_control(uc, false);
+ if (err < 0)
+ goto release_fw;
+ err = ccg_cmd_jump_boot_mode(uc, 0);
+ if (err < 0)
+ goto release_fw;
+ }
+
+ eof = fw->data + fw->size;
+
+ /*
+ * check if signed fw
+ * last part of fw image is fw cfg table and signature
+ */
+ if (fw->size < sizeof(fw_cfg) + sizeof(fw_cfg_sig))
+ goto not_signed_fw;
+
+ memcpy((uint8_t *)&fw_cfg, fw->data + fw->size -
+ sizeof(fw_cfg) - sizeof(fw_cfg_sig), sizeof(fw_cfg));
+
+ if (fw_cfg.identity != ('F' | ('W' << 8) | ('C' << 16) | ('T' << 24))) {
+ dev_info(dev, "not a signed image\n");
+ goto not_signed_fw;
+ }
+ eof = fw->data + fw->size - sizeof(fw_cfg) - sizeof(fw_cfg_sig);
+
+ memcpy((uint8_t *)&fw_cfg_sig,
+ fw->data + fw->size - sizeof(fw_cfg_sig), sizeof(fw_cfg_sig));
+
+ /* flash fw config table and signature first */
+ err = ccg_cmd_write_flash_row(uc, 0, (u8 *)&fw_cfg,
+ FLASH_FWCT1_WR_CMD);
+ if (err)
+ goto release_fw;
+
+ err = ccg_cmd_write_flash_row(uc, 0, (u8 *)&fw_cfg + CCG4_ROW_SIZE,
+ FLASH_FWCT2_WR_CMD);
+ if (err)
+ goto release_fw;
+
+ err = ccg_cmd_write_flash_row(uc, 0, &fw_cfg_sig,
+ FLASH_FWCT_SIG_WR_CMD);
+ if (err)
+ goto release_fw;
+
+not_signed_fw:
+ wr_buf = kzalloc(CCG4_ROW_SIZE + 4, GFP_KERNEL);
+ if (!wr_buf)
+ return -ENOMEM;
+
+ err = ccg_cmd_enter_flashing(uc);
+ if (err)
+ goto release_mem;
+
+ /*****************************************************************
+ * CCG firmware image (.cyacd) file line format
+ *
+ * :00rrrrllll[dd....]cc/r/n
+ *
+ * :00 header
+ * rrrr is row number to flash (4 char)
+ * llll is data len to flash (4 char)
+ * dd is a data field represents one byte of data (512 char)
+ * cc is checksum (2 char)
+ * \r\n newline
+ *
+ * Total length: 3 + 4 + 4 + 512 + 2 + 2 = 527
+ *
+ *****************************************************************/
+
+ p = strnchr(fw->data, fw->size, ':');
+ while (p < eof) {
+ s = strnchr(p + 1, eof - p - 1, ':');
+
+ if (!s)
+ s = eof;
+
+ line_sz = s - p;
+
+ if (line_sz != CYACD_LINE_SIZE) {
+ dev_err(dev, "Bad FW format line_sz=%d\n", line_sz);
+ err = -EINVAL;
+ goto release_mem;
+ }
+
+ if (hex2bin(wr_buf, p + 3, CCG4_ROW_SIZE + 4)) {
+ err = -EINVAL;
+ goto release_mem;
+ }
+
+ row = get_unaligned_be16(wr_buf);
+ len = get_unaligned_be16(&wr_buf[2]);
+
+ if (len != CCG4_ROW_SIZE) {
+ err = -EINVAL;
+ goto release_mem;
+ }
+
+ err = ccg_cmd_write_flash_row(uc, row, wr_buf + 4,
+ FLASH_WR_CMD);
+ if (err)
+ goto release_mem;
+
+ line_cnt++;
+ p = s;
+ }
+
+ dev_info(dev, "total %d row flashed. time: %dms\n",
+ line_cnt, jiffies_to_msecs(jiffies - start_time));
+
+ err = ccg_cmd_validate_fw(uc, (mode == PRIMARY) ? FW2 : FW1);
+ if (err)
+ dev_err(dev, "%s validation failed err=%d\n",
+ (mode == PRIMARY) ? "FW2" : "FW1", err);
+ else
+ dev_info(dev, "%s validated\n",
+ (mode == PRIMARY) ? "FW2" : "FW1");
+
+ err = ccg_cmd_port_control(uc, false);
+ if (err < 0)
+ goto release_mem;
+
+ err = ccg_cmd_reset(uc);
+ if (err < 0)
+ goto release_mem;
+
+ err = ccg_cmd_port_control(uc, true);
+ if (err < 0)
+ goto release_mem;
+
+release_mem:
+ kfree(wr_buf);
+
+release_fw:
+ release_firmware(fw);
+ return err;
+}
+
+/*******************************************************************************
+ * CCG4 has two copies of the firmware in addition to the bootloader.
+ * If the device is running FW1, FW2 can be updated with the new version.
+ * Dual firmware mode allows the CCG device to stay in a PD contract and support
+ * USB PD and Type-C functionality while a firmware update is in progress.
+ ******************************************************************************/
+static int ccg_fw_update(struct ucsi_ccg *uc, enum enum_flash_mode flash_mode)
+{
+ int err;
+
+ while (flash_mode != FLASH_NOT_NEEDED) {
+ err = do_flash(uc, flash_mode);
+ if (err < 0)
+ return err;
+ err = ccg_fw_update_needed(uc, &flash_mode);
+ if (err < 0)
+ return err;
+ }
+ dev_info(uc->dev, "CCG FW update successful\n");
+
+ return err;
+}
+
+static int ccg_restart(struct ucsi_ccg *uc)
+{
+ struct device *dev = uc->dev;
+ int status;
+
+ status = ucsi_ccg_init(uc);
+ if (status < 0) {
+ dev_err(dev, "ucsi_ccg_start fail, err=%d\n", status);
+ return status;
+ }
+
+ status = request_threaded_irq(uc->irq, NULL, ccg_irq_handler,
+ IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+ dev_name(dev), uc);
+ if (status < 0) {
+ dev_err(dev, "request_threaded_irq failed - %d\n", status);
+ return status;
+ }
+
+ uc->ucsi = ucsi_register_ppm(dev, &uc->ppm);
+ if (IS_ERR(uc->ucsi)) {
+ dev_err(uc->dev, "ucsi_register_ppm failed\n");
+ return PTR_ERR(uc->ucsi);
+ }
+
+ return 0;
+}
+
+static void ccg_update_firmware(struct work_struct *work)
+{
+ struct ucsi_ccg *uc = container_of(work, struct ucsi_ccg, work);
+ enum enum_flash_mode flash_mode;
+ int status;
+
+ status = ccg_fw_update_needed(uc, &flash_mode);
+ if (status < 0)
+ return;
+
+ if (flash_mode != FLASH_NOT_NEEDED) {
+ ucsi_unregister_ppm(uc->ucsi);
+ free_irq(uc->irq, uc);
+
+ ccg_fw_update(uc, flash_mode);
+ ccg_restart(uc);
+ }
+}
+
+static ssize_t do_flash_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ struct i2c_client *i2c_cl = to_i2c_client(dev);
+ struct ucsi_ccg *uc = i2c_get_clientdata(i2c_cl);
+ unsigned int mode;
+
+ if (kstrtouint(buf, 10, &mode))
+ return -EINVAL;
+
+ if (uc->fw_build == 0x0) {
+ dev_err(dev, "fail to flash FW due to missing FW build info");
+ return -EINVAL;
+ }
+
+ if (mode)
+ schedule_work(&uc->work);
+
+ return n;
+}
+
+static ssize_t do_flash_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "[Usage]\n"
+ "1) copy ccg_boot.cyacd /lib/firmware/\n"
+ "2) copy ccg_primary.cyacd /lib/firmware/\n"
+ "3) copy ccg_secondary.cyacd /lib/firmware/\n"
+ "4) echo 1 > do_flash\n");
+}
+
+static DEVICE_ATTR_RW(do_flash);
+
+static struct attribute *
+ucsi_ccg_sysfs_attrs[] = {
+ &dev_attr_do_flash.attr,
+ NULL,
+};
+
+static struct attribute_group
+ucsi_ccg_attr_group = {
+ .attrs = ucsi_ccg_sysfs_attrs,
+};
+
static int ucsi_ccg_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -296,6 +1087,14 @@ static int ucsi_ccg_probe(struct i2c_client *client,
uc->ppm.sync = ucsi_ccg_sync;
uc->dev = dev;
uc->client = client;
+ mutex_init(&uc->lock);
+ INIT_WORK(&uc->work, ccg_update_firmware);
+
+ /* Only fail FW flashing when FW build information is not provided */
+ status = device_property_read_u16(dev, "ccgx,firmware-build",
+ &uc->fw_build);
+ if (status)
+ dev_err(uc->dev, "failed to get FW build information\n");
/* reset ccg device and initialize ucsi */
status = ucsi_ccg_init(uc);
@@ -310,15 +1109,21 @@ static int ucsi_ccg_probe(struct i2c_client *client,
return status;
}
- status = devm_request_threaded_irq(dev, client->irq, NULL,
- ccg_irq_handler,
- IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
- dev_name(dev), uc);
+ uc->port_num = 1;
+
+ if (uc->info.mode & CCG_DEVINFO_PDPORTS_MASK)
+ uc->port_num++;
+
+ status = request_threaded_irq(client->irq, NULL, ccg_irq_handler,
+ IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+ dev_name(dev), uc);
if (status < 0) {
dev_err(uc->dev, "request_threaded_irq failed - %d\n", status);
return status;
}
+ uc->irq = client->irq;
+
uc->ucsi = ucsi_register_ppm(dev, &uc->ppm);
if (IS_ERR(uc->ucsi)) {
dev_err(uc->dev, "ucsi_register_ppm failed\n");
@@ -335,6 +1140,11 @@ static int ucsi_ccg_probe(struct i2c_client *client,
}
i2c_set_clientdata(client, uc);
+
+ status = sysfs_create_group(&uc->dev->kobj, &ucsi_ccg_attr_group);
+ if (status)
+ dev_err(uc->dev, "cannot create sysfs group: %d\n", status);
+
return 0;
}
@@ -342,7 +1152,10 @@ static int ucsi_ccg_remove(struct i2c_client *client)
{
struct ucsi_ccg *uc = i2c_get_clientdata(client);
+ cancel_work_sync(&uc->work);
ucsi_unregister_ppm(uc->ucsi);
+ free_irq(uc->irq, uc);
+ sysfs_remove_group(&uc->dev->kobj, &ucsi_ccg_attr_group);
return 0;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [v2,3/7] usb: typec: ucsi: ccg: add firmware flashing support
@ 2019-04-16 10:00 ` Greg Kroah-Hartman
2019-04-16 10:00 ` [PATCH v2 3/7] " Greg Kroah-Hartman
0 siblings, 1 reply; 28+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-16 10:00 UTC (permalink / raw)
To: Heikki Krogerus; +Cc: Ajay Gupta, linux-usb
On Mon, Apr 15, 2019 at 03:09:27PM +0300, Heikki Krogerus wrote:
> +static ssize_t do_flash_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return sprintf(buf, "[Usage]\n"
> + "1) copy ccg_boot.cyacd /lib/firmware/\n"
> + "2) copy ccg_primary.cyacd /lib/firmware/\n"
> + "3) copy ccg_secondary.cyacd /lib/firmware/\n"
> + "4) echo 1 > do_flash\n");
> +}
That is cute, but no, the kernel does NOT provide built-in help texts
for sysfs files. If you know of any existing ones that do this, please
point them out to me and I will go delete them from the tree.
sysfs is "one value per file", and a "multi-line-help-text" is not a
single value.
That is what the Documentation/ABI files are for, which I do not see an
update for in this patch so I can not take it, sorry :(
thanks,
greg k-h
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v2 3/7] usb: typec: ucsi: ccg: add firmware flashing support
2019-04-16 10:00 ` [v2,3/7] " Greg Kroah-Hartman
@ 2019-04-16 10:00 ` Greg Kroah-Hartman
0 siblings, 0 replies; 28+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-16 10:00 UTC (permalink / raw)
To: Heikki Krogerus; +Cc: Ajay Gupta, linux-usb
On Mon, Apr 15, 2019 at 03:09:27PM +0300, Heikki Krogerus wrote:
> +static ssize_t do_flash_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return sprintf(buf, "[Usage]\n"
> + "1) copy ccg_boot.cyacd /lib/firmware/\n"
> + "2) copy ccg_primary.cyacd /lib/firmware/\n"
> + "3) copy ccg_secondary.cyacd /lib/firmware/\n"
> + "4) echo 1 > do_flash\n");
> +}
That is cute, but no, the kernel does NOT provide built-in help texts
for sysfs files. If you know of any existing ones that do this, please
point them out to me and I will go delete them from the tree.
sysfs is "one value per file", and a "multi-line-help-text" is not a
single value.
That is what the Documentation/ABI files are for, which I do not see an
update for in this patch so I can not take it, sorry :(
thanks,
greg k-h
^ permalink raw reply [flat|nested] 28+ messages in thread
* [v2,4/7] usb: typec: ucsi: Preliminary support for alternate modes
@ 2019-04-15 12:09 ` Heikki Krogerus
2019-04-15 12:09 ` [PATCH v2 4/7] " Heikki Krogerus
0 siblings, 1 reply; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
With UCSI the alternate modes, just like everything else
related to USB Type-C connectors, are handled in firmware.
The operating system can see the status and is allowed to
request certain things, for example entering and exiting the
modes, but the support for alternate modes is very limited
in UCSI. The feature is also optional, which means that even
when the platform supports alternate modes, the operating
system may not be even made aware of them.
UCSI does not support direct VDM reading or writing.
Instead, alternate modes can be entered and exited using a
single custom command which takes also an optional SVID
specific configuration value as parameter. That means every
supported alternate mode has to be handled separately in
UCSI driver.
This commit does not include support for any specific
alternate mode. The discovered alternate modes are now
registered, but binding a driver to an alternate mode will
not be possible until support for that alternate mode is
added to the UCSI driver.
Tested-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/typec/ucsi/trace.c | 12 ++
drivers/usb/typec/ucsi/trace.h | 26 +++
drivers/usb/typec/ucsi/ucsi.c | 358 +++++++++++++++++++++++++++------
drivers/usb/typec/ucsi/ucsi.h | 72 +++++++
4 files changed, 403 insertions(+), 65 deletions(-)
diff --git a/drivers/usb/typec/ucsi/trace.c b/drivers/usb/typec/ucsi/trace.c
index ffa3b4c3f338..1dabafb74320 100644
--- a/drivers/usb/typec/ucsi/trace.c
+++ b/drivers/usb/typec/ucsi/trace.c
@@ -60,3 +60,15 @@ const char *ucsi_cci_str(u32 cci)
return "";
}
+
+static const char * const ucsi_recipient_strs[] = {
+ [UCSI_RECIPIENT_CON] = "port",
+ [UCSI_RECIPIENT_SOP] = "partner",
+ [UCSI_RECIPIENT_SOP_P] = "plug (prime)",
+ [UCSI_RECIPIENT_SOP_PP] = "plug (double prime)",
+};
+
+const char *ucsi_recipient_str(u8 recipient)
+{
+ return ucsi_recipient_strs[recipient];
+}
diff --git a/drivers/usb/typec/ucsi/trace.h b/drivers/usb/typec/ucsi/trace.h
index 5e2906df2db7..783ec9c72055 100644
--- a/drivers/usb/typec/ucsi/trace.h
+++ b/drivers/usb/typec/ucsi/trace.h
@@ -7,6 +7,7 @@
#define __UCSI_TRACE_H
#include <linux/tracepoint.h>
+#include <linux/usb/typec_altmode.h>
const char *ucsi_cmd_str(u64 raw_cmd);
const char *ucsi_ack_str(u8 ack);
@@ -134,6 +135,31 @@ DEFINE_EVENT(ucsi_log_connector_status, ucsi_register_port,
TP_ARGS(port, status)
);
+DECLARE_EVENT_CLASS(ucsi_log_register_altmode,
+ TP_PROTO(u8 recipient, struct typec_altmode *alt),
+ TP_ARGS(recipient, alt),
+ TP_STRUCT__entry(
+ __field(u8, recipient)
+ __field(u16, svid)
+ __field(u8, mode)
+ __field(u32, vdo)
+ ),
+ TP_fast_assign(
+ __entry->recipient = recipient;
+ __entry->svid = alt->svid;
+ __entry->mode = alt->mode;
+ __entry->vdo = alt->vdo;
+ ),
+ TP_printk("%s alt mode: svid %04x, mode %d vdo %x",
+ ucsi_recipient_str(__entry->recipient), __entry->svid,
+ __entry->mode, __entry->vdo)
+);
+
+DEFINE_EVENT(ucsi_log_register_altmode, ucsi_register_altmode,
+ TP_PROTO(u8 recipient, struct typec_altmode *alt),
+ TP_ARGS(recipient, alt)
+);
+
#endif /* __UCSI_TRACE_H */
/* This part must be outside protection */
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 8d0a6fe748bd..585ab04be940 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -12,7 +12,7 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/usb/typec.h>
+#include <linux/usb/typec_altmode.h>
#include "ucsi.h"
#include "trace.h"
@@ -45,22 +45,6 @@ enum ucsi_status {
UCSI_ERROR,
};
-struct ucsi_connector {
- int num;
-
- struct ucsi *ucsi;
- struct work_struct work;
- struct completion complete;
-
- struct typec_port *port;
- struct typec_partner *partner;
-
- struct typec_capability typec_cap;
-
- struct ucsi_connector_status status;
- struct ucsi_connector_capability cap;
-};
-
struct ucsi {
struct device *dev;
struct ucsi_ppm *ppm;
@@ -238,8 +222,204 @@ static int ucsi_run_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
return ret;
}
+int ucsi_send_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
+ void *retval, size_t size)
+{
+ int ret;
+
+ mutex_lock(&ucsi->ppm_lock);
+ ret = ucsi_run_command(ucsi, ctrl, retval, size);
+ mutex_unlock(&ucsi->ppm_lock);
+
+ return ret;
+}
+
/* -------------------------------------------------------------------------- */
+void ucsi_altmode_update_active(struct ucsi_connector *con)
+{
+ const struct typec_altmode *altmode = NULL;
+ struct ucsi_control ctrl;
+ int ret;
+ u8 cur;
+ int i;
+
+ UCSI_CMD_GET_CURRENT_CAM(ctrl, con->num);
+ ret = ucsi_run_command(con->ucsi, &ctrl, &cur, sizeof(cur));
+ if (ret < 0) {
+ if (con->ucsi->ppm->data->version > 0x0100) {
+ dev_err(con->ucsi->dev,
+ "GET_CURRENT_CAM command failed\n");
+ return;
+ }
+ cur = 0xff;
+ }
+
+ if (cur < UCSI_MAX_ALTMODES)
+ altmode = typec_altmode_get_partner(con->port_altmode[cur]);
+
+ for (i = 0; con->partner_altmode[i]; i++)
+ typec_altmode_update_active(con->partner_altmode[i],
+ con->partner_altmode[i] == altmode);
+}
+
+static u8 ucsi_altmode_next_mode(struct typec_altmode **alt, u16 svid)
+{
+ u8 mode = 1;
+ int i;
+
+ for (i = 0; alt[i]; i++)
+ if (alt[i]->svid == svid)
+ mode++;
+
+ return mode;
+}
+
+static int ucsi_next_altmode(struct typec_altmode **alt)
+{
+ int i = 0;
+
+ for (i = 0; i < UCSI_MAX_ALTMODES; i++)
+ if (!alt[i])
+ return i;
+
+ return -ENOENT;
+}
+
+static int ucsi_register_altmode(struct ucsi_connector *con,
+ struct typec_altmode_desc *desc,
+ u8 recipient)
+{
+ struct typec_altmode *alt;
+ int ret;
+ int i;
+
+ switch (recipient) {
+ case UCSI_RECIPIENT_CON:
+ i = ucsi_next_altmode(con->port_altmode);
+ if (i < 0) {
+ ret = i;
+ goto err;
+ }
+
+ desc->mode = ucsi_altmode_next_mode(con->port_altmode,
+ desc->svid);
+
+ alt = typec_port_register_altmode(con->port, desc);
+ if (IS_ERR(alt)) {
+ ret = PTR_ERR(alt);
+ goto err;
+ }
+
+ con->port_altmode[i] = alt;
+ break;
+ case UCSI_RECIPIENT_SOP:
+ i = ucsi_next_altmode(con->partner_altmode);
+ if (i < 0) {
+ ret = i;
+ goto err;
+ }
+
+ desc->mode = ucsi_altmode_next_mode(con->partner_altmode,
+ desc->svid);
+
+ alt = typec_partner_register_altmode(con->partner, desc);
+ if (IS_ERR(alt)) {
+ ret = PTR_ERR(alt);
+ goto err;
+ }
+
+ con->partner_altmode[i] = alt;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ trace_ucsi_register_altmode(recipient, alt);
+
+ return 0;
+
+err:
+ dev_err(con->ucsi->dev, "failed to registers svid 0x%04x mode %d\n",
+ desc->svid, desc->mode);
+
+ return ret;
+}
+
+static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient)
+{
+ int max_altmodes = UCSI_MAX_ALTMODES;
+ struct typec_altmode_desc desc;
+ struct ucsi_altmode alt[2];
+ struct ucsi_control ctrl;
+ int num = 1;
+ int ret;
+ int len;
+ int j;
+ int i;
+
+ if (!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_DETAILS))
+ return 0;
+
+ if (recipient == UCSI_RECIPIENT_CON)
+ max_altmodes = con->ucsi->cap.num_alt_modes;
+
+ for (i = 0; i < max_altmodes;) {
+ memset(alt, 0, sizeof(alt));
+ UCSI_CMD_GET_ALTERNATE_MODES(ctrl, recipient, con->num, i, 1);
+ len = ucsi_run_command(con->ucsi, &ctrl, alt, sizeof(alt));
+ if (len <= 0)
+ return len;
+
+ /*
+ * This code is requesting one alt mode at a time, but some PPMs
+ * may still return two. If that happens both alt modes need be
+ * registered and the offset for the next alt mode has to be
+ * incremented.
+ */
+ num = len / sizeof(alt[0]);
+ i += num;
+
+ for (j = 0; j < num; j++) {
+ if (!alt[j].svid)
+ return 0;
+
+ memset(&desc, 0, sizeof(desc));
+ desc.vdo = alt[j].mid;
+ desc.svid = alt[j].svid;
+ desc.roles = TYPEC_PORT_DRD;
+
+ ret = ucsi_register_altmode(con, &desc, recipient);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
+{
+ struct typec_altmode **adev;
+ int i = 0;
+
+ switch (recipient) {
+ case UCSI_RECIPIENT_CON:
+ adev = con->port_altmode;
+ break;
+ case UCSI_RECIPIENT_SOP:
+ adev = con->partner_altmode;
+ break;
+ default:
+ return;
+ }
+
+ while (adev[i]) {
+ typec_unregister_altmode(adev[i]);
+ adev[i++] = NULL;
+ }
+}
+
static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
{
switch (con->status.pwr_op_mode) {
@@ -299,10 +479,46 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
if (!con->partner)
return;
+ ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
typec_unregister_partner(con->partner);
con->partner = NULL;
}
+static void ucsi_partner_change(struct ucsi_connector *con)
+{
+ int ret;
+
+ if (!con->partner)
+ return;
+
+ switch (con->status.partner_type) {
+ case UCSI_CONSTAT_PARTNER_TYPE_UFP:
+ typec_set_data_role(con->port, TYPEC_HOST);
+ break;
+ case UCSI_CONSTAT_PARTNER_TYPE_DFP:
+ typec_set_data_role(con->port, TYPEC_DEVICE);
+ break;
+ default:
+ break;
+ }
+
+ /* Complete pending data role swap */
+ if (!completion_done(&con->complete))
+ complete(&con->complete);
+
+ if (con->partner_altmode[0])
+ return;
+
+ /* Can't rely on Partner Flags field. Always checking the alt modes. */
+ ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
+ if (ret)
+ dev_err(con->ucsi->dev,
+ "con%d: failed to register partner alternate modes\n",
+ con->num);
+ else
+ ucsi_altmode_update_active(con);
+}
+
static void ucsi_connector_change(struct work_struct *work)
{
struct ucsi_connector *con = container_of(work, struct ucsi_connector,
@@ -311,10 +527,10 @@ static void ucsi_connector_change(struct work_struct *work)
struct ucsi_control ctrl;
int ret;
- mutex_lock(&ucsi->ppm_lock);
+ mutex_lock(&con->lock);
UCSI_CMD_GET_CONNECTOR_STATUS(ctrl, con->num);
- ret = ucsi_run_command(ucsi, &ctrl, &con->status, sizeof(con->status));
+ ret = ucsi_send_command(ucsi, &ctrl, &con->status, sizeof(con->status));
if (ret < 0) {
dev_err(ucsi->dev, "%s: GET_CONNECTOR_STATUS failed (%d)\n",
__func__, ret);
@@ -332,23 +548,6 @@ static void ucsi_connector_change(struct work_struct *work)
complete(&con->complete);
}
- if (con->status.change & UCSI_CONSTAT_PARTNER_CHANGE) {
- switch (con->status.partner_type) {
- case UCSI_CONSTAT_PARTNER_TYPE_UFP:
- typec_set_data_role(con->port, TYPEC_HOST);
- break;
- case UCSI_CONSTAT_PARTNER_TYPE_DFP:
- typec_set_data_role(con->port, TYPEC_DEVICE);
- break;
- default:
- break;
- }
-
- /* Complete pending data role swap */
- if (!completion_done(&con->complete))
- complete(&con->complete);
- }
-
if (con->status.change & UCSI_CONSTAT_CONNECT_CHANGE) {
typec_set_pwr_role(con->port, con->status.pwr_dir);
@@ -369,6 +568,19 @@ static void ucsi_connector_change(struct work_struct *work)
ucsi_unregister_partner(con);
}
+ if (con->status.change & UCSI_CONSTAT_CAM_CHANGE) {
+ /*
+ * We don't need to know the currently supported alt modes here.
+ * Running GET_CAM_SUPPORTED command just to make sure the PPM
+ * does not get stuck in case it assumes we do so.
+ */
+ UCSI_CMD_GET_CAM_SUPPORTED(ctrl, con->num);
+ ucsi_run_command(con->ucsi, &ctrl, NULL, 0);
+ }
+
+ if (con->status.change & UCSI_CONSTAT_PARTNER_CHANGE)
+ ucsi_partner_change(con);
+
ret = ucsi_ack(ucsi, UCSI_ACK_EVENT);
if (ret)
dev_err(ucsi->dev, "%s: ACK failed (%d)", __func__, ret);
@@ -377,7 +589,7 @@ static void ucsi_connector_change(struct work_struct *work)
out_unlock:
clear_bit(EVENT_PENDING, &ucsi->flags);
- mutex_unlock(&ucsi->ppm_lock);
+ mutex_unlock(&con->lock);
}
/**
@@ -427,7 +639,7 @@ static int ucsi_reset_connector(struct ucsi_connector *con, bool hard)
UCSI_CMD_CONNECTOR_RESET(ctrl, con, hard);
- return ucsi_run_command(con->ucsi, &ctrl, NULL, 0);
+ return ucsi_send_command(con->ucsi, &ctrl, NULL, 0);
}
static int ucsi_reset_ppm(struct ucsi *ucsi)
@@ -481,15 +693,17 @@ static int ucsi_role_cmd(struct ucsi_connector *con, struct ucsi_control *ctrl)
{
int ret;
- ret = ucsi_run_command(con->ucsi, ctrl, NULL, 0);
+ ret = ucsi_send_command(con->ucsi, ctrl, NULL, 0);
if (ret == -ETIMEDOUT) {
struct ucsi_control c;
/* PPM most likely stopped responding. Resetting everything. */
+ mutex_lock(&con->ucsi->ppm_lock);
ucsi_reset_ppm(con->ucsi);
+ mutex_unlock(&con->ucsi->ppm_lock);
UCSI_CMD_SET_NTFY_ENABLE(c, UCSI_ENABLE_NTFY_ALL);
- ucsi_run_command(con->ucsi, &c, NULL, 0);
+ ucsi_send_command(con->ucsi, &c, NULL, 0);
ucsi_reset_connector(con, true);
}
@@ -504,10 +718,12 @@ ucsi_dr_swap(const struct typec_capability *cap, enum typec_data_role role)
struct ucsi_control ctrl;
int ret = 0;
- if (!con->partner)
- return -ENOTCONN;
+ mutex_lock(&con->lock);
- mutex_lock(&con->ucsi->ppm_lock);
+ if (!con->partner) {
+ ret = -ENOTCONN;
+ goto out_unlock;
+ }
if ((con->status.partner_type == UCSI_CONSTAT_PARTNER_TYPE_DFP &&
role == TYPEC_DEVICE) ||
@@ -520,18 +736,14 @@ ucsi_dr_swap(const struct typec_capability *cap, enum typec_data_role role)
if (ret < 0)
goto out_unlock;
- mutex_unlock(&con->ucsi->ppm_lock);
-
if (!wait_for_completion_timeout(&con->complete,
msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
- return -ETIMEDOUT;
-
- return 0;
+ ret = -ETIMEDOUT;
out_unlock:
- mutex_unlock(&con->ucsi->ppm_lock);
+ mutex_unlock(&con->lock);
- return ret;
+ return ret < 0 ? ret : 0;
}
static int
@@ -541,10 +753,12 @@ ucsi_pr_swap(const struct typec_capability *cap, enum typec_role role)
struct ucsi_control ctrl;
int ret = 0;
- if (!con->partner)
- return -ENOTCONN;
+ mutex_lock(&con->lock);
- mutex_lock(&con->ucsi->ppm_lock);
+ if (!con->partner) {
+ ret = -ENOTCONN;
+ goto out_unlock;
+ }
if (con->status.pwr_dir == role)
goto out_unlock;
@@ -554,13 +768,11 @@ ucsi_pr_swap(const struct typec_capability *cap, enum typec_role role)
if (ret < 0)
goto out_unlock;
- mutex_unlock(&con->ucsi->ppm_lock);
-
if (!wait_for_completion_timeout(&con->complete,
- msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
- return -ETIMEDOUT;
-
- mutex_lock(&con->ucsi->ppm_lock);
+ msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) {
+ ret = -ETIMEDOUT;
+ goto out_unlock;
+ }
/* Something has gone wrong while swapping the role */
if (con->status.pwr_op_mode != UCSI_CONSTAT_PWR_OPMODE_PD) {
@@ -569,7 +781,7 @@ ucsi_pr_swap(const struct typec_capability *cap, enum typec_role role)
}
out_unlock:
- mutex_unlock(&con->ucsi->ppm_lock);
+ mutex_unlock(&con->lock);
return ret;
}
@@ -595,6 +807,7 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
INIT_WORK(&con->work, ucsi_connector_change);
init_completion(&con->complete);
+ mutex_init(&con->lock);
con->num = index + 1;
con->ucsi = ucsi;
@@ -636,6 +849,12 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
if (IS_ERR(con->port))
return PTR_ERR(con->port);
+ /* Alternate modes */
+ ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_CON);
+ if (ret)
+ dev_err(ucsi->dev, "con%d: failed to register alt modes\n",
+ con->num);
+
/* Get the status */
UCSI_CMD_GET_CONNECTOR_STATUS(ctrl, con->num);
ret = ucsi_run_command(ucsi, &ctrl, &con->status, sizeof(con->status));
@@ -662,6 +881,16 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
if (con->status.connected)
ucsi_register_partner(con);
+ if (con->partner) {
+ ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
+ if (ret)
+ dev_err(ucsi->dev,
+ "con%d: failed to register alternate modes\n",
+ con->num);
+ else
+ ucsi_altmode_update_active(con);
+ }
+
trace_ucsi_register_port(con->num, &con->status);
return 0;
@@ -730,6 +959,7 @@ static void ucsi_init(struct work_struct *work)
err_unregister:
for (con = ucsi->connector; con->port; con++) {
ucsi_unregister_partner(con);
+ ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON);
typec_unregister_port(con->port);
con->port = NULL;
}
@@ -788,17 +1018,15 @@ void ucsi_unregister_ppm(struct ucsi *ucsi)
/* Make sure that we are not in the middle of driver initialization */
cancel_work_sync(&ucsi->work);
- mutex_lock(&ucsi->ppm_lock);
-
/* Disable everything except command complete notification */
UCSI_CMD_SET_NTFY_ENABLE(ctrl, UCSI_ENABLE_NTFY_CMD_COMPLETE)
- ucsi_run_command(ucsi, &ctrl, NULL, 0);
-
- mutex_unlock(&ucsi->ppm_lock);
+ ucsi_send_command(ucsi, &ctrl, NULL, 0);
for (i = 0; i < ucsi->cap.num_connectors; i++) {
cancel_work_sync(&ucsi->connector[i].work);
ucsi_unregister_partner(&ucsi->connector[i]);
+ ucsi_unregister_altmodes(&ucsi->connector[i],
+ UCSI_RECIPIENT_CON);
typec_unregister_port(ucsi->connector[i].port);
}
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 53b80f40a908..c416bae4b5ca 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -6,6 +6,7 @@
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/types.h>
+#include <linux/usb/typec.h>
/* -------------------------------------------------------------------------- */
@@ -60,6 +61,20 @@ struct ucsi_uor_cmd {
u16:6; /* reserved */
} __packed;
+/* Get Alternate Modes Command structure */
+struct ucsi_altmode_cmd {
+ u8 cmd;
+ u8 length;
+ u8 recipient;
+#define UCSI_RECIPIENT_CON 0
+#define UCSI_RECIPIENT_SOP 1
+#define UCSI_RECIPIENT_SOP_P 2
+#define UCSI_RECIPIENT_SOP_PP 3
+ u8 con_num;
+ u8 offset;
+ u8 num_altmodes;
+} __packed;
+
struct ucsi_control {
union {
u64 raw_cmd;
@@ -67,6 +82,7 @@ struct ucsi_control {
struct ucsi_uor_cmd uor;
struct ucsi_ack_cmd ack;
struct ucsi_con_rst con_rst;
+ struct ucsi_altmode_cmd alt;
};
};
@@ -112,6 +128,30 @@ struct ucsi_control {
(_ctrl_).cmd.data = _con_; \
}
+/* Helper for preparing ucsi_control for GET_ALTERNATE_MODES command. */
+#define UCSI_CMD_GET_ALTERNATE_MODES(_ctrl_, _r_, _con_num_, _o_, _num_)\
+{ \
+ __UCSI_CMD((_ctrl_), UCSI_GET_ALTERNATE_MODES) \
+ _ctrl_.alt.recipient = (_r_); \
+ _ctrl_.alt.con_num = (_con_num_); \
+ _ctrl_.alt.offset = (_o_); \
+ _ctrl_.alt.num_altmodes = (_num_) - 1; \
+}
+
+/* Helper for preparing ucsi_control for GET_CAM_SUPPORTED command. */
+#define UCSI_CMD_GET_CAM_SUPPORTED(_ctrl_, _con_) \
+{ \
+ __UCSI_CMD((_ctrl_), UCSI_GET_CAM_SUPPORTED) \
+ _ctrl_.cmd.data = (_con_); \
+}
+
+/* Helper for preparing ucsi_control for GET_CAM_SUPPORTED command. */
+#define UCSI_CMD_GET_CURRENT_CAM(_ctrl_, _con_) \
+{ \
+ __UCSI_CMD((_ctrl_), UCSI_GET_CURRENT_CAM) \
+ _ctrl_.cmd.data = (_con_); \
+}
+
/* Helper for preparing ucsi_control for GET_CONNECTOR_STATUS command. */
#define UCSI_CMD_GET_CONNECTOR_STATUS(_ctrl_, _con_) \
{ \
@@ -334,4 +374,36 @@ struct ucsi *ucsi_register_ppm(struct device *dev, struct ucsi_ppm *ppm);
void ucsi_unregister_ppm(struct ucsi *ucsi);
void ucsi_notify(struct ucsi *ucsi);
+/* -------------------------------------------------------------------------- */
+
+struct ucsi;
+
+#define UCSI_MAX_SVID 5
+#define UCSI_MAX_ALTMODES (UCSI_MAX_SVID * 6)
+
+struct ucsi_connector {
+ int num;
+
+ struct ucsi *ucsi;
+ struct mutex lock; /* port lock */
+ struct work_struct work;
+ struct completion complete;
+
+ struct typec_port *port;
+ struct typec_partner *partner;
+
+ struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES];
+ struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES];
+
+ struct typec_capability typec_cap;
+
+ struct ucsi_connector_status status;
+ struct ucsi_connector_capability cap;
+};
+
+int ucsi_send_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
+ void *retval, size_t size);
+
+void ucsi_altmode_update_active(struct ucsi_connector *con);
+
#endif /* __DRIVER_USB_TYPEC_UCSI_H */
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 4/7] usb: typec: ucsi: Preliminary support for alternate modes
2019-04-15 12:09 ` [v2,4/7] usb: typec: ucsi: Preliminary support for alternate modes Heikki Krogerus
@ 2019-04-15 12:09 ` Heikki Krogerus
0 siblings, 0 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
With UCSI the alternate modes, just like everything else
related to USB Type-C connectors, are handled in firmware.
The operating system can see the status and is allowed to
request certain things, for example entering and exiting the
modes, but the support for alternate modes is very limited
in UCSI. The feature is also optional, which means that even
when the platform supports alternate modes, the operating
system may not be even made aware of them.
UCSI does not support direct VDM reading or writing.
Instead, alternate modes can be entered and exited using a
single custom command which takes also an optional SVID
specific configuration value as parameter. That means every
supported alternate mode has to be handled separately in
UCSI driver.
This commit does not include support for any specific
alternate mode. The discovered alternate modes are now
registered, but binding a driver to an alternate mode will
not be possible until support for that alternate mode is
added to the UCSI driver.
Tested-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/typec/ucsi/trace.c | 12 ++
drivers/usb/typec/ucsi/trace.h | 26 +++
drivers/usb/typec/ucsi/ucsi.c | 358 +++++++++++++++++++++++++++------
drivers/usb/typec/ucsi/ucsi.h | 72 +++++++
4 files changed, 403 insertions(+), 65 deletions(-)
diff --git a/drivers/usb/typec/ucsi/trace.c b/drivers/usb/typec/ucsi/trace.c
index ffa3b4c3f338..1dabafb74320 100644
--- a/drivers/usb/typec/ucsi/trace.c
+++ b/drivers/usb/typec/ucsi/trace.c
@@ -60,3 +60,15 @@ const char *ucsi_cci_str(u32 cci)
return "";
}
+
+static const char * const ucsi_recipient_strs[] = {
+ [UCSI_RECIPIENT_CON] = "port",
+ [UCSI_RECIPIENT_SOP] = "partner",
+ [UCSI_RECIPIENT_SOP_P] = "plug (prime)",
+ [UCSI_RECIPIENT_SOP_PP] = "plug (double prime)",
+};
+
+const char *ucsi_recipient_str(u8 recipient)
+{
+ return ucsi_recipient_strs[recipient];
+}
diff --git a/drivers/usb/typec/ucsi/trace.h b/drivers/usb/typec/ucsi/trace.h
index 5e2906df2db7..783ec9c72055 100644
--- a/drivers/usb/typec/ucsi/trace.h
+++ b/drivers/usb/typec/ucsi/trace.h
@@ -7,6 +7,7 @@
#define __UCSI_TRACE_H
#include <linux/tracepoint.h>
+#include <linux/usb/typec_altmode.h>
const char *ucsi_cmd_str(u64 raw_cmd);
const char *ucsi_ack_str(u8 ack);
@@ -134,6 +135,31 @@ DEFINE_EVENT(ucsi_log_connector_status, ucsi_register_port,
TP_ARGS(port, status)
);
+DECLARE_EVENT_CLASS(ucsi_log_register_altmode,
+ TP_PROTO(u8 recipient, struct typec_altmode *alt),
+ TP_ARGS(recipient, alt),
+ TP_STRUCT__entry(
+ __field(u8, recipient)
+ __field(u16, svid)
+ __field(u8, mode)
+ __field(u32, vdo)
+ ),
+ TP_fast_assign(
+ __entry->recipient = recipient;
+ __entry->svid = alt->svid;
+ __entry->mode = alt->mode;
+ __entry->vdo = alt->vdo;
+ ),
+ TP_printk("%s alt mode: svid %04x, mode %d vdo %x",
+ ucsi_recipient_str(__entry->recipient), __entry->svid,
+ __entry->mode, __entry->vdo)
+);
+
+DEFINE_EVENT(ucsi_log_register_altmode, ucsi_register_altmode,
+ TP_PROTO(u8 recipient, struct typec_altmode *alt),
+ TP_ARGS(recipient, alt)
+);
+
#endif /* __UCSI_TRACE_H */
/* This part must be outside protection */
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 8d0a6fe748bd..585ab04be940 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -12,7 +12,7 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/usb/typec.h>
+#include <linux/usb/typec_altmode.h>
#include "ucsi.h"
#include "trace.h"
@@ -45,22 +45,6 @@ enum ucsi_status {
UCSI_ERROR,
};
-struct ucsi_connector {
- int num;
-
- struct ucsi *ucsi;
- struct work_struct work;
- struct completion complete;
-
- struct typec_port *port;
- struct typec_partner *partner;
-
- struct typec_capability typec_cap;
-
- struct ucsi_connector_status status;
- struct ucsi_connector_capability cap;
-};
-
struct ucsi {
struct device *dev;
struct ucsi_ppm *ppm;
@@ -238,8 +222,204 @@ static int ucsi_run_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
return ret;
}
+int ucsi_send_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
+ void *retval, size_t size)
+{
+ int ret;
+
+ mutex_lock(&ucsi->ppm_lock);
+ ret = ucsi_run_command(ucsi, ctrl, retval, size);
+ mutex_unlock(&ucsi->ppm_lock);
+
+ return ret;
+}
+
/* -------------------------------------------------------------------------- */
+void ucsi_altmode_update_active(struct ucsi_connector *con)
+{
+ const struct typec_altmode *altmode = NULL;
+ struct ucsi_control ctrl;
+ int ret;
+ u8 cur;
+ int i;
+
+ UCSI_CMD_GET_CURRENT_CAM(ctrl, con->num);
+ ret = ucsi_run_command(con->ucsi, &ctrl, &cur, sizeof(cur));
+ if (ret < 0) {
+ if (con->ucsi->ppm->data->version > 0x0100) {
+ dev_err(con->ucsi->dev,
+ "GET_CURRENT_CAM command failed\n");
+ return;
+ }
+ cur = 0xff;
+ }
+
+ if (cur < UCSI_MAX_ALTMODES)
+ altmode = typec_altmode_get_partner(con->port_altmode[cur]);
+
+ for (i = 0; con->partner_altmode[i]; i++)
+ typec_altmode_update_active(con->partner_altmode[i],
+ con->partner_altmode[i] == altmode);
+}
+
+static u8 ucsi_altmode_next_mode(struct typec_altmode **alt, u16 svid)
+{
+ u8 mode = 1;
+ int i;
+
+ for (i = 0; alt[i]; i++)
+ if (alt[i]->svid == svid)
+ mode++;
+
+ return mode;
+}
+
+static int ucsi_next_altmode(struct typec_altmode **alt)
+{
+ int i = 0;
+
+ for (i = 0; i < UCSI_MAX_ALTMODES; i++)
+ if (!alt[i])
+ return i;
+
+ return -ENOENT;
+}
+
+static int ucsi_register_altmode(struct ucsi_connector *con,
+ struct typec_altmode_desc *desc,
+ u8 recipient)
+{
+ struct typec_altmode *alt;
+ int ret;
+ int i;
+
+ switch (recipient) {
+ case UCSI_RECIPIENT_CON:
+ i = ucsi_next_altmode(con->port_altmode);
+ if (i < 0) {
+ ret = i;
+ goto err;
+ }
+
+ desc->mode = ucsi_altmode_next_mode(con->port_altmode,
+ desc->svid);
+
+ alt = typec_port_register_altmode(con->port, desc);
+ if (IS_ERR(alt)) {
+ ret = PTR_ERR(alt);
+ goto err;
+ }
+
+ con->port_altmode[i] = alt;
+ break;
+ case UCSI_RECIPIENT_SOP:
+ i = ucsi_next_altmode(con->partner_altmode);
+ if (i < 0) {
+ ret = i;
+ goto err;
+ }
+
+ desc->mode = ucsi_altmode_next_mode(con->partner_altmode,
+ desc->svid);
+
+ alt = typec_partner_register_altmode(con->partner, desc);
+ if (IS_ERR(alt)) {
+ ret = PTR_ERR(alt);
+ goto err;
+ }
+
+ con->partner_altmode[i] = alt;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ trace_ucsi_register_altmode(recipient, alt);
+
+ return 0;
+
+err:
+ dev_err(con->ucsi->dev, "failed to registers svid 0x%04x mode %d\n",
+ desc->svid, desc->mode);
+
+ return ret;
+}
+
+static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient)
+{
+ int max_altmodes = UCSI_MAX_ALTMODES;
+ struct typec_altmode_desc desc;
+ struct ucsi_altmode alt[2];
+ struct ucsi_control ctrl;
+ int num = 1;
+ int ret;
+ int len;
+ int j;
+ int i;
+
+ if (!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_DETAILS))
+ return 0;
+
+ if (recipient == UCSI_RECIPIENT_CON)
+ max_altmodes = con->ucsi->cap.num_alt_modes;
+
+ for (i = 0; i < max_altmodes;) {
+ memset(alt, 0, sizeof(alt));
+ UCSI_CMD_GET_ALTERNATE_MODES(ctrl, recipient, con->num, i, 1);
+ len = ucsi_run_command(con->ucsi, &ctrl, alt, sizeof(alt));
+ if (len <= 0)
+ return len;
+
+ /*
+ * This code is requesting one alt mode at a time, but some PPMs
+ * may still return two. If that happens both alt modes need be
+ * registered and the offset for the next alt mode has to be
+ * incremented.
+ */
+ num = len / sizeof(alt[0]);
+ i += num;
+
+ for (j = 0; j < num; j++) {
+ if (!alt[j].svid)
+ return 0;
+
+ memset(&desc, 0, sizeof(desc));
+ desc.vdo = alt[j].mid;
+ desc.svid = alt[j].svid;
+ desc.roles = TYPEC_PORT_DRD;
+
+ ret = ucsi_register_altmode(con, &desc, recipient);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
+{
+ struct typec_altmode **adev;
+ int i = 0;
+
+ switch (recipient) {
+ case UCSI_RECIPIENT_CON:
+ adev = con->port_altmode;
+ break;
+ case UCSI_RECIPIENT_SOP:
+ adev = con->partner_altmode;
+ break;
+ default:
+ return;
+ }
+
+ while (adev[i]) {
+ typec_unregister_altmode(adev[i]);
+ adev[i++] = NULL;
+ }
+}
+
static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
{
switch (con->status.pwr_op_mode) {
@@ -299,10 +479,46 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
if (!con->partner)
return;
+ ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
typec_unregister_partner(con->partner);
con->partner = NULL;
}
+static void ucsi_partner_change(struct ucsi_connector *con)
+{
+ int ret;
+
+ if (!con->partner)
+ return;
+
+ switch (con->status.partner_type) {
+ case UCSI_CONSTAT_PARTNER_TYPE_UFP:
+ typec_set_data_role(con->port, TYPEC_HOST);
+ break;
+ case UCSI_CONSTAT_PARTNER_TYPE_DFP:
+ typec_set_data_role(con->port, TYPEC_DEVICE);
+ break;
+ default:
+ break;
+ }
+
+ /* Complete pending data role swap */
+ if (!completion_done(&con->complete))
+ complete(&con->complete);
+
+ if (con->partner_altmode[0])
+ return;
+
+ /* Can't rely on Partner Flags field. Always checking the alt modes. */
+ ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
+ if (ret)
+ dev_err(con->ucsi->dev,
+ "con%d: failed to register partner alternate modes\n",
+ con->num);
+ else
+ ucsi_altmode_update_active(con);
+}
+
static void ucsi_connector_change(struct work_struct *work)
{
struct ucsi_connector *con = container_of(work, struct ucsi_connector,
@@ -311,10 +527,10 @@ static void ucsi_connector_change(struct work_struct *work)
struct ucsi_control ctrl;
int ret;
- mutex_lock(&ucsi->ppm_lock);
+ mutex_lock(&con->lock);
UCSI_CMD_GET_CONNECTOR_STATUS(ctrl, con->num);
- ret = ucsi_run_command(ucsi, &ctrl, &con->status, sizeof(con->status));
+ ret = ucsi_send_command(ucsi, &ctrl, &con->status, sizeof(con->status));
if (ret < 0) {
dev_err(ucsi->dev, "%s: GET_CONNECTOR_STATUS failed (%d)\n",
__func__, ret);
@@ -332,23 +548,6 @@ static void ucsi_connector_change(struct work_struct *work)
complete(&con->complete);
}
- if (con->status.change & UCSI_CONSTAT_PARTNER_CHANGE) {
- switch (con->status.partner_type) {
- case UCSI_CONSTAT_PARTNER_TYPE_UFP:
- typec_set_data_role(con->port, TYPEC_HOST);
- break;
- case UCSI_CONSTAT_PARTNER_TYPE_DFP:
- typec_set_data_role(con->port, TYPEC_DEVICE);
- break;
- default:
- break;
- }
-
- /* Complete pending data role swap */
- if (!completion_done(&con->complete))
- complete(&con->complete);
- }
-
if (con->status.change & UCSI_CONSTAT_CONNECT_CHANGE) {
typec_set_pwr_role(con->port, con->status.pwr_dir);
@@ -369,6 +568,19 @@ static void ucsi_connector_change(struct work_struct *work)
ucsi_unregister_partner(con);
}
+ if (con->status.change & UCSI_CONSTAT_CAM_CHANGE) {
+ /*
+ * We don't need to know the currently supported alt modes here.
+ * Running GET_CAM_SUPPORTED command just to make sure the PPM
+ * does not get stuck in case it assumes we do so.
+ */
+ UCSI_CMD_GET_CAM_SUPPORTED(ctrl, con->num);
+ ucsi_run_command(con->ucsi, &ctrl, NULL, 0);
+ }
+
+ if (con->status.change & UCSI_CONSTAT_PARTNER_CHANGE)
+ ucsi_partner_change(con);
+
ret = ucsi_ack(ucsi, UCSI_ACK_EVENT);
if (ret)
dev_err(ucsi->dev, "%s: ACK failed (%d)", __func__, ret);
@@ -377,7 +589,7 @@ static void ucsi_connector_change(struct work_struct *work)
out_unlock:
clear_bit(EVENT_PENDING, &ucsi->flags);
- mutex_unlock(&ucsi->ppm_lock);
+ mutex_unlock(&con->lock);
}
/**
@@ -427,7 +639,7 @@ static int ucsi_reset_connector(struct ucsi_connector *con, bool hard)
UCSI_CMD_CONNECTOR_RESET(ctrl, con, hard);
- return ucsi_run_command(con->ucsi, &ctrl, NULL, 0);
+ return ucsi_send_command(con->ucsi, &ctrl, NULL, 0);
}
static int ucsi_reset_ppm(struct ucsi *ucsi)
@@ -481,15 +693,17 @@ static int ucsi_role_cmd(struct ucsi_connector *con, struct ucsi_control *ctrl)
{
int ret;
- ret = ucsi_run_command(con->ucsi, ctrl, NULL, 0);
+ ret = ucsi_send_command(con->ucsi, ctrl, NULL, 0);
if (ret == -ETIMEDOUT) {
struct ucsi_control c;
/* PPM most likely stopped responding. Resetting everything. */
+ mutex_lock(&con->ucsi->ppm_lock);
ucsi_reset_ppm(con->ucsi);
+ mutex_unlock(&con->ucsi->ppm_lock);
UCSI_CMD_SET_NTFY_ENABLE(c, UCSI_ENABLE_NTFY_ALL);
- ucsi_run_command(con->ucsi, &c, NULL, 0);
+ ucsi_send_command(con->ucsi, &c, NULL, 0);
ucsi_reset_connector(con, true);
}
@@ -504,10 +718,12 @@ ucsi_dr_swap(const struct typec_capability *cap, enum typec_data_role role)
struct ucsi_control ctrl;
int ret = 0;
- if (!con->partner)
- return -ENOTCONN;
+ mutex_lock(&con->lock);
- mutex_lock(&con->ucsi->ppm_lock);
+ if (!con->partner) {
+ ret = -ENOTCONN;
+ goto out_unlock;
+ }
if ((con->status.partner_type == UCSI_CONSTAT_PARTNER_TYPE_DFP &&
role == TYPEC_DEVICE) ||
@@ -520,18 +736,14 @@ ucsi_dr_swap(const struct typec_capability *cap, enum typec_data_role role)
if (ret < 0)
goto out_unlock;
- mutex_unlock(&con->ucsi->ppm_lock);
-
if (!wait_for_completion_timeout(&con->complete,
msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
- return -ETIMEDOUT;
-
- return 0;
+ ret = -ETIMEDOUT;
out_unlock:
- mutex_unlock(&con->ucsi->ppm_lock);
+ mutex_unlock(&con->lock);
- return ret;
+ return ret < 0 ? ret : 0;
}
static int
@@ -541,10 +753,12 @@ ucsi_pr_swap(const struct typec_capability *cap, enum typec_role role)
struct ucsi_control ctrl;
int ret = 0;
- if (!con->partner)
- return -ENOTCONN;
+ mutex_lock(&con->lock);
- mutex_lock(&con->ucsi->ppm_lock);
+ if (!con->partner) {
+ ret = -ENOTCONN;
+ goto out_unlock;
+ }
if (con->status.pwr_dir == role)
goto out_unlock;
@@ -554,13 +768,11 @@ ucsi_pr_swap(const struct typec_capability *cap, enum typec_role role)
if (ret < 0)
goto out_unlock;
- mutex_unlock(&con->ucsi->ppm_lock);
-
if (!wait_for_completion_timeout(&con->complete,
- msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
- return -ETIMEDOUT;
-
- mutex_lock(&con->ucsi->ppm_lock);
+ msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) {
+ ret = -ETIMEDOUT;
+ goto out_unlock;
+ }
/* Something has gone wrong while swapping the role */
if (con->status.pwr_op_mode != UCSI_CONSTAT_PWR_OPMODE_PD) {
@@ -569,7 +781,7 @@ ucsi_pr_swap(const struct typec_capability *cap, enum typec_role role)
}
out_unlock:
- mutex_unlock(&con->ucsi->ppm_lock);
+ mutex_unlock(&con->lock);
return ret;
}
@@ -595,6 +807,7 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
INIT_WORK(&con->work, ucsi_connector_change);
init_completion(&con->complete);
+ mutex_init(&con->lock);
con->num = index + 1;
con->ucsi = ucsi;
@@ -636,6 +849,12 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
if (IS_ERR(con->port))
return PTR_ERR(con->port);
+ /* Alternate modes */
+ ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_CON);
+ if (ret)
+ dev_err(ucsi->dev, "con%d: failed to register alt modes\n",
+ con->num);
+
/* Get the status */
UCSI_CMD_GET_CONNECTOR_STATUS(ctrl, con->num);
ret = ucsi_run_command(ucsi, &ctrl, &con->status, sizeof(con->status));
@@ -662,6 +881,16 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
if (con->status.connected)
ucsi_register_partner(con);
+ if (con->partner) {
+ ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
+ if (ret)
+ dev_err(ucsi->dev,
+ "con%d: failed to register alternate modes\n",
+ con->num);
+ else
+ ucsi_altmode_update_active(con);
+ }
+
trace_ucsi_register_port(con->num, &con->status);
return 0;
@@ -730,6 +959,7 @@ static void ucsi_init(struct work_struct *work)
err_unregister:
for (con = ucsi->connector; con->port; con++) {
ucsi_unregister_partner(con);
+ ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON);
typec_unregister_port(con->port);
con->port = NULL;
}
@@ -788,17 +1018,15 @@ void ucsi_unregister_ppm(struct ucsi *ucsi)
/* Make sure that we are not in the middle of driver initialization */
cancel_work_sync(&ucsi->work);
- mutex_lock(&ucsi->ppm_lock);
-
/* Disable everything except command complete notification */
UCSI_CMD_SET_NTFY_ENABLE(ctrl, UCSI_ENABLE_NTFY_CMD_COMPLETE)
- ucsi_run_command(ucsi, &ctrl, NULL, 0);
-
- mutex_unlock(&ucsi->ppm_lock);
+ ucsi_send_command(ucsi, &ctrl, NULL, 0);
for (i = 0; i < ucsi->cap.num_connectors; i++) {
cancel_work_sync(&ucsi->connector[i].work);
ucsi_unregister_partner(&ucsi->connector[i]);
+ ucsi_unregister_altmodes(&ucsi->connector[i],
+ UCSI_RECIPIENT_CON);
typec_unregister_port(ucsi->connector[i].port);
}
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 53b80f40a908..c416bae4b5ca 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -6,6 +6,7 @@
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/types.h>
+#include <linux/usb/typec.h>
/* -------------------------------------------------------------------------- */
@@ -60,6 +61,20 @@ struct ucsi_uor_cmd {
u16:6; /* reserved */
} __packed;
+/* Get Alternate Modes Command structure */
+struct ucsi_altmode_cmd {
+ u8 cmd;
+ u8 length;
+ u8 recipient;
+#define UCSI_RECIPIENT_CON 0
+#define UCSI_RECIPIENT_SOP 1
+#define UCSI_RECIPIENT_SOP_P 2
+#define UCSI_RECIPIENT_SOP_PP 3
+ u8 con_num;
+ u8 offset;
+ u8 num_altmodes;
+} __packed;
+
struct ucsi_control {
union {
u64 raw_cmd;
@@ -67,6 +82,7 @@ struct ucsi_control {
struct ucsi_uor_cmd uor;
struct ucsi_ack_cmd ack;
struct ucsi_con_rst con_rst;
+ struct ucsi_altmode_cmd alt;
};
};
@@ -112,6 +128,30 @@ struct ucsi_control {
(_ctrl_).cmd.data = _con_; \
}
+/* Helper for preparing ucsi_control for GET_ALTERNATE_MODES command. */
+#define UCSI_CMD_GET_ALTERNATE_MODES(_ctrl_, _r_, _con_num_, _o_, _num_)\
+{ \
+ __UCSI_CMD((_ctrl_), UCSI_GET_ALTERNATE_MODES) \
+ _ctrl_.alt.recipient = (_r_); \
+ _ctrl_.alt.con_num = (_con_num_); \
+ _ctrl_.alt.offset = (_o_); \
+ _ctrl_.alt.num_altmodes = (_num_) - 1; \
+}
+
+/* Helper for preparing ucsi_control for GET_CAM_SUPPORTED command. */
+#define UCSI_CMD_GET_CAM_SUPPORTED(_ctrl_, _con_) \
+{ \
+ __UCSI_CMD((_ctrl_), UCSI_GET_CAM_SUPPORTED) \
+ _ctrl_.cmd.data = (_con_); \
+}
+
+/* Helper for preparing ucsi_control for GET_CAM_SUPPORTED command. */
+#define UCSI_CMD_GET_CURRENT_CAM(_ctrl_, _con_) \
+{ \
+ __UCSI_CMD((_ctrl_), UCSI_GET_CURRENT_CAM) \
+ _ctrl_.cmd.data = (_con_); \
+}
+
/* Helper for preparing ucsi_control for GET_CONNECTOR_STATUS command. */
#define UCSI_CMD_GET_CONNECTOR_STATUS(_ctrl_, _con_) \
{ \
@@ -334,4 +374,36 @@ struct ucsi *ucsi_register_ppm(struct device *dev, struct ucsi_ppm *ppm);
void ucsi_unregister_ppm(struct ucsi *ucsi);
void ucsi_notify(struct ucsi *ucsi);
+/* -------------------------------------------------------------------------- */
+
+struct ucsi;
+
+#define UCSI_MAX_SVID 5
+#define UCSI_MAX_ALTMODES (UCSI_MAX_SVID * 6)
+
+struct ucsi_connector {
+ int num;
+
+ struct ucsi *ucsi;
+ struct mutex lock; /* port lock */
+ struct work_struct work;
+ struct completion complete;
+
+ struct typec_port *port;
+ struct typec_partner *partner;
+
+ struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES];
+ struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES];
+
+ struct typec_capability typec_cap;
+
+ struct ucsi_connector_status status;
+ struct ucsi_connector_capability cap;
+};
+
+int ucsi_send_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
+ void *retval, size_t size);
+
+void ucsi_altmode_update_active(struct ucsi_connector *con);
+
#endif /* __DRIVER_USB_TYPEC_UCSI_H */
--
2.20.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [v2,5/7] usb: typec: ucsi: Support for DisplayPort alt mode
@ 2019-04-15 12:09 ` Heikki Krogerus
2019-04-15 12:09 ` [PATCH v2 5/7] " Heikki Krogerus
0 siblings, 1 reply; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
This makes it possible to bind a driver to a DisplayPort
alt mode adapter devices.
The driver attempts to cope with the limitations of UCSI by
"emulating" behaviour and attempting to guess things when
ever possible in order to satisfy the requirements the
standard DisplayPort alt mode driver has.
Tested-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/typec/ucsi/Makefile | 15 +-
drivers/usb/typec/ucsi/displayport.c | 305 +++++++++++++++++++++++++++
drivers/usb/typec/ucsi/ucsi.c | 21 +-
drivers/usb/typec/ucsi/ucsi.h | 21 ++
4 files changed, 354 insertions(+), 8 deletions(-)
create mode 100644 drivers/usb/typec/ucsi/displayport.c
diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
index 2f4900b26210..b35e15a1f02c 100644
--- a/drivers/usb/typec/ucsi/Makefile
+++ b/drivers/usb/typec/ucsi/Makefile
@@ -1,12 +1,15 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS_trace.o := -I$(src)
+CFLAGS_trace.o := -I$(src)
-obj-$(CONFIG_TYPEC_UCSI) += typec_ucsi.o
+obj-$(CONFIG_TYPEC_UCSI) += typec_ucsi.o
-typec_ucsi-y := ucsi.o
+typec_ucsi-y := ucsi.o
-typec_ucsi-$(CONFIG_TRACING) += trace.o
+typec_ucsi-$(CONFIG_TRACING) += trace.o
-obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
+ifneq ($(CONFIG_TYPEC_DP_ALTMODE),)
+ typec_ucsi-y += displayport.o
+endif
-obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
+obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
+obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c
new file mode 100644
index 000000000000..6c892cb409b7
--- /dev/null
+++ b/drivers/usb/typec/ucsi/displayport.c
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UCSI DisplayPort Alternate Mode Support
+ *
+ * Copyright (C) 2018, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/pd_vdo.h>
+
+#include "ucsi.h"
+
+#define UCSI_CMD_SET_NEW_CAM(_con_num_, _enter_, _cam_, _am_) \
+ (UCSI_SET_NEW_CAM | ((_con_num_) << 16) | ((_enter_) << 23) | \
+ ((_cam_) << 24) | ((u64)(_am_) << 32))
+
+struct ucsi_dp {
+ struct typec_displayport_data data;
+ struct ucsi_connector *con;
+ struct typec_altmode *alt;
+ struct work_struct work;
+ int offset;
+
+ bool override;
+ bool initialized;
+
+ u32 header;
+ u32 *vdo_data;
+ u8 vdo_size;
+};
+
+/*
+ * Note. Alternate mode control is optional feature in UCSI. It means that even
+ * if the system supports alternate modes, the OS may not be aware of them.
+ *
+ * In most cases however, the OS will be able to see the supported alternate
+ * modes, but it may still not be able to configure them, not even enter or exit
+ * them. That is because UCSI defines alt mode details and alt mode "overriding"
+ * as separate options.
+ *
+ * In case alt mode details are supported, but overriding is not, the driver
+ * will still display the supported pin assignments and configuration, but any
+ * changes the user attempts to do will lead into failure with return value of
+ * -EOPNOTSUPP.
+ */
+
+static int ucsi_displayport_enter(struct typec_altmode *alt)
+{
+ struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
+
+ mutex_lock(&dp->con->lock);
+
+ if (!dp->override && dp->initialized) {
+ const struct typec_altmode *p = typec_altmode_get_partner(alt);
+
+ dev_warn(&p->dev,
+ "firmware doesn't support alternate mode overriding\n");
+ mutex_unlock(&dp->con->lock);
+ return -EOPNOTSUPP;
+ }
+
+ /*
+ * We can't send the New CAM command yet to the PPM as it needs the
+ * configuration value as well. Pretending that we have now entered the
+ * mode, and letting the alt mode driver continue.
+ */
+
+ dp->header = VDO(USB_TYPEC_DP_SID, 1, CMD_ENTER_MODE);
+ dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+
+ dp->vdo_data = NULL;
+ dp->vdo_size = 1;
+
+ schedule_work(&dp->work);
+
+ mutex_unlock(&dp->con->lock);
+
+ return 0;
+}
+
+static int ucsi_displayport_exit(struct typec_altmode *alt)
+{
+ struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
+ struct ucsi_control ctrl;
+ int ret = 0;
+ u8 cur;
+
+ mutex_lock(&dp->con->lock);
+
+ if (!dp->override) {
+ const struct typec_altmode *p = typec_altmode_get_partner(alt);
+
+ dev_warn(&p->dev,
+ "firmware doesn't support alternate mode overriding\n");
+ ret = -EOPNOTSUPP;
+ goto out_unlock;
+ }
+
+ UCSI_CMD_GET_CURRENT_CAM(ctrl, dp->con->num);
+ ret = ucsi_send_command(dp->con->ucsi, &ctrl, &cur, sizeof(cur));
+ if (ret < 0 || cur != 0xff) {
+ ret = -EBUSY;
+ goto out_unlock;
+ }
+
+ ctrl.raw_cmd = UCSI_CMD_SET_NEW_CAM(dp->con->num, 0, dp->offset, 0);
+ ret = ucsi_send_command(dp->con->ucsi, &ctrl, NULL, 0);
+ if (ret < 0)
+ goto out_unlock;
+
+ dp->header = VDO(USB_TYPEC_DP_SID, 1, CMD_EXIT_MODE);
+ dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+
+ dp->vdo_data = NULL;
+ dp->vdo_size = 1;
+
+ schedule_work(&dp->work);
+
+out_unlock:
+ mutex_unlock(&dp->con->lock);
+
+ return ret;
+}
+
+/*
+ * We do not actually have access to the Status Update VDO, so we have to guess
+ * things.
+ */
+static int ucsi_displayport_status_update(struct ucsi_dp *dp)
+{
+ u32 cap = dp->alt->vdo;
+
+ dp->data.status = DP_STATUS_ENABLED;
+
+ /*
+ * If pin assignement D is supported, claiming always
+ * that Multi-function is preferred.
+ */
+ if (DP_CAP_CAPABILITY(cap) & DP_CAP_UFP_D) {
+ dp->data.status |= DP_STATUS_CON_UFP_D;
+
+ if (DP_CAP_UFP_D_PIN_ASSIGN(cap) & BIT(DP_PIN_ASSIGN_D))
+ dp->data.status |= DP_STATUS_PREFER_MULTI_FUNC;
+ } else {
+ dp->data.status |= DP_STATUS_CON_DFP_D;
+
+ if (DP_CAP_DFP_D_PIN_ASSIGN(cap) & BIT(DP_PIN_ASSIGN_D))
+ dp->data.status |= DP_STATUS_PREFER_MULTI_FUNC;
+ }
+
+ dp->vdo_data = &dp->data.status;
+ dp->vdo_size = 2;
+
+ return 0;
+}
+
+static int ucsi_displayport_configure(struct ucsi_dp *dp)
+{
+ u32 pins = DP_CONF_GET_PIN_ASSIGN(dp->data.conf);
+ struct ucsi_control ctrl;
+
+ if (!dp->override)
+ return 0;
+
+ ctrl.raw_cmd = UCSI_CMD_SET_NEW_CAM(dp->con->num, 1, dp->offset, pins);
+
+ return ucsi_send_command(dp->con->ucsi, &ctrl, NULL, 0);
+}
+
+static int ucsi_displayport_vdm(struct typec_altmode *alt,
+ u32 header, const u32 *data, int count)
+{
+ struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
+ int cmd_type = PD_VDO_CMDT(header);
+ int cmd = PD_VDO_CMD(header);
+
+ mutex_lock(&dp->con->lock);
+
+ if (!dp->override && dp->initialized) {
+ const struct typec_altmode *p = typec_altmode_get_partner(alt);
+
+ dev_warn(&p->dev,
+ "firmware doesn't support alternate mode overriding\n");
+ mutex_unlock(&dp->con->lock);
+ return -EOPNOTSUPP;
+ }
+
+ switch (cmd_type) {
+ case CMDT_INIT:
+ dp->header = VDO(USB_TYPEC_DP_SID, 1, cmd);
+ dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
+
+ switch (cmd) {
+ case DP_CMD_STATUS_UPDATE:
+ if (ucsi_displayport_status_update(dp))
+ dp->header |= VDO_CMDT(CMDT_RSP_NAK);
+ else
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+ break;
+ case DP_CMD_CONFIGURE:
+ dp->data.conf = *data;
+ if (ucsi_displayport_configure(dp)) {
+ dp->header |= VDO_CMDT(CMDT_RSP_NAK);
+ } else {
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+ if (dp->initialized)
+ ucsi_altmode_update_active(dp->con);
+ else
+ dp->initialized = true;
+ }
+ break;
+ default:
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+ break;
+ }
+
+ schedule_work(&dp->work);
+ break;
+ default:
+ break;
+ }
+
+ mutex_unlock(&dp->con->lock);
+
+ return 0;
+}
+
+static const struct typec_altmode_ops ucsi_displayport_ops = {
+ .enter = ucsi_displayport_enter,
+ .exit = ucsi_displayport_exit,
+ .vdm = ucsi_displayport_vdm,
+};
+
+static void ucsi_displayport_work(struct work_struct *work)
+{
+ struct ucsi_dp *dp = container_of(work, struct ucsi_dp, work);
+ int ret;
+
+ mutex_lock(&dp->con->lock);
+
+ ret = typec_altmode_vdm(dp->alt, dp->header,
+ dp->vdo_data, dp->vdo_size);
+ if (ret)
+ dev_err(&dp->alt->dev, "VDM 0x%x failed\n", dp->header);
+
+ dp->vdo_data = NULL;
+ dp->vdo_size = 0;
+ dp->header = 0;
+
+ mutex_unlock(&dp->con->lock);
+}
+
+void ucsi_displayport_remove_partner(struct typec_altmode *alt)
+{
+ struct ucsi_dp *dp;
+
+ if (!alt)
+ return;
+
+ dp = typec_altmode_get_drvdata(alt);
+ dp->data.conf = 0;
+ dp->data.status = 0;
+ dp->initialized = false;
+}
+
+struct typec_altmode *ucsi_register_displayport(struct ucsi_connector *con,
+ bool override, int offset,
+ struct typec_altmode_desc *desc)
+{
+ u8 all_assignments = BIT(DP_PIN_ASSIGN_C) | BIT(DP_PIN_ASSIGN_D) |
+ BIT(DP_PIN_ASSIGN_E);
+ struct typec_altmode *alt;
+ struct ucsi_dp *dp;
+
+ /* We can't rely on the firmware with the capabilities. */
+ desc->vdo |= DP_CAP_DP_SIGNALING | DP_CAP_RECEPTACLE;
+
+ /* Claiming that we support all pin assignments */
+ desc->vdo |= all_assignments << 8;
+ desc->vdo |= all_assignments << 16;
+
+ alt = typec_port_register_altmode(con->port, desc);
+ if (IS_ERR(alt))
+ return alt;
+
+ dp = devm_kzalloc(&alt->dev, sizeof(*dp), GFP_KERNEL);
+ if (!dp) {
+ typec_unregister_altmode(alt);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ INIT_WORK(&dp->work, ucsi_displayport_work);
+ dp->override = override;
+ dp->offset = offset;
+ dp->con = con;
+ dp->alt = alt;
+
+ alt->ops = &ucsi_displayport_ops;
+ typec_altmode_set_drvdata(alt, dp);
+
+ return alt;
+}
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 585ab04be940..22fb956687de 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -12,7 +12,7 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
#include "ucsi.h"
#include "trace.h"
@@ -291,9 +291,12 @@ static int ucsi_register_altmode(struct ucsi_connector *con,
u8 recipient)
{
struct typec_altmode *alt;
+ bool override;
int ret;
int i;
+ override = !!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_OVERRIDE);
+
switch (recipient) {
case UCSI_RECIPIENT_CON:
i = ucsi_next_altmode(con->port_altmode);
@@ -305,7 +308,15 @@ static int ucsi_register_altmode(struct ucsi_connector *con,
desc->mode = ucsi_altmode_next_mode(con->port_altmode,
desc->svid);
- alt = typec_port_register_altmode(con->port, desc);
+ switch (desc->svid) {
+ case USB_TYPEC_DP_SID:
+ alt = ucsi_register_displayport(con, override, i, desc);
+ break;
+ default:
+ alt = typec_port_register_altmode(con->port, desc);
+ break;
+ }
+
if (IS_ERR(alt)) {
ret = PTR_ERR(alt);
goto err;
@@ -400,6 +411,7 @@ static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient)
static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
{
+ const struct typec_altmode *pdev;
struct typec_altmode **adev;
int i = 0;
@@ -415,6 +427,11 @@ static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
}
while (adev[i]) {
+ if (recipient == UCSI_RECIPIENT_SOP &&
+ adev[i]->svid == USB_TYPEC_DP_SID) {
+ pdev = typec_altmode_get_partner(adev[i]);
+ ucsi_displayport_remove_partner((void *)pdev);
+ }
typec_unregister_altmode(adev[i]);
adev[i++] = NULL;
}
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index c416bae4b5ca..036ebf256cdd 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -406,4 +406,25 @@ int ucsi_send_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
void ucsi_altmode_update_active(struct ucsi_connector *con);
+#if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE)
+struct typec_altmode *
+ucsi_register_displayport(struct ucsi_connector *con,
+ bool override, int offset,
+ struct typec_altmode_desc *desc);
+
+void ucsi_displayport_remove_partner(struct typec_altmode *adev);
+
+#else
+static inline struct typec_altmode *
+ucsi_register_displayport(struct ucsi_connector *con,
+ bool override, int offset,
+ struct typec_altmode_desc *desc)
+{
+ return NULL;
+}
+
+static inline void
+ucsi_displayport_remove_partner(struct typec_altmode *adev) { }
+#endif /* CONFIG_TYPEC_DP_ALTMODE */
+
#endif /* __DRIVER_USB_TYPEC_UCSI_H */
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 5/7] usb: typec: ucsi: Support for DisplayPort alt mode
2019-04-15 12:09 ` [v2,5/7] usb: typec: ucsi: Support for DisplayPort alt mode Heikki Krogerus
@ 2019-04-15 12:09 ` Heikki Krogerus
0 siblings, 0 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
This makes it possible to bind a driver to a DisplayPort
alt mode adapter devices.
The driver attempts to cope with the limitations of UCSI by
"emulating" behaviour and attempting to guess things when
ever possible in order to satisfy the requirements the
standard DisplayPort alt mode driver has.
Tested-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/typec/ucsi/Makefile | 15 +-
drivers/usb/typec/ucsi/displayport.c | 305 +++++++++++++++++++++++++++
drivers/usb/typec/ucsi/ucsi.c | 21 +-
drivers/usb/typec/ucsi/ucsi.h | 21 ++
4 files changed, 354 insertions(+), 8 deletions(-)
create mode 100644 drivers/usb/typec/ucsi/displayport.c
diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
index 2f4900b26210..b35e15a1f02c 100644
--- a/drivers/usb/typec/ucsi/Makefile
+++ b/drivers/usb/typec/ucsi/Makefile
@@ -1,12 +1,15 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS_trace.o := -I$(src)
+CFLAGS_trace.o := -I$(src)
-obj-$(CONFIG_TYPEC_UCSI) += typec_ucsi.o
+obj-$(CONFIG_TYPEC_UCSI) += typec_ucsi.o
-typec_ucsi-y := ucsi.o
+typec_ucsi-y := ucsi.o
-typec_ucsi-$(CONFIG_TRACING) += trace.o
+typec_ucsi-$(CONFIG_TRACING) += trace.o
-obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
+ifneq ($(CONFIG_TYPEC_DP_ALTMODE),)
+ typec_ucsi-y += displayport.o
+endif
-obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
+obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
+obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c
new file mode 100644
index 000000000000..6c892cb409b7
--- /dev/null
+++ b/drivers/usb/typec/ucsi/displayport.c
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UCSI DisplayPort Alternate Mode Support
+ *
+ * Copyright (C) 2018, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/pd_vdo.h>
+
+#include "ucsi.h"
+
+#define UCSI_CMD_SET_NEW_CAM(_con_num_, _enter_, _cam_, _am_) \
+ (UCSI_SET_NEW_CAM | ((_con_num_) << 16) | ((_enter_) << 23) | \
+ ((_cam_) << 24) | ((u64)(_am_) << 32))
+
+struct ucsi_dp {
+ struct typec_displayport_data data;
+ struct ucsi_connector *con;
+ struct typec_altmode *alt;
+ struct work_struct work;
+ int offset;
+
+ bool override;
+ bool initialized;
+
+ u32 header;
+ u32 *vdo_data;
+ u8 vdo_size;
+};
+
+/*
+ * Note. Alternate mode control is optional feature in UCSI. It means that even
+ * if the system supports alternate modes, the OS may not be aware of them.
+ *
+ * In most cases however, the OS will be able to see the supported alternate
+ * modes, but it may still not be able to configure them, not even enter or exit
+ * them. That is because UCSI defines alt mode details and alt mode "overriding"
+ * as separate options.
+ *
+ * In case alt mode details are supported, but overriding is not, the driver
+ * will still display the supported pin assignments and configuration, but any
+ * changes the user attempts to do will lead into failure with return value of
+ * -EOPNOTSUPP.
+ */
+
+static int ucsi_displayport_enter(struct typec_altmode *alt)
+{
+ struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
+
+ mutex_lock(&dp->con->lock);
+
+ if (!dp->override && dp->initialized) {
+ const struct typec_altmode *p = typec_altmode_get_partner(alt);
+
+ dev_warn(&p->dev,
+ "firmware doesn't support alternate mode overriding\n");
+ mutex_unlock(&dp->con->lock);
+ return -EOPNOTSUPP;
+ }
+
+ /*
+ * We can't send the New CAM command yet to the PPM as it needs the
+ * configuration value as well. Pretending that we have now entered the
+ * mode, and letting the alt mode driver continue.
+ */
+
+ dp->header = VDO(USB_TYPEC_DP_SID, 1, CMD_ENTER_MODE);
+ dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+
+ dp->vdo_data = NULL;
+ dp->vdo_size = 1;
+
+ schedule_work(&dp->work);
+
+ mutex_unlock(&dp->con->lock);
+
+ return 0;
+}
+
+static int ucsi_displayport_exit(struct typec_altmode *alt)
+{
+ struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
+ struct ucsi_control ctrl;
+ int ret = 0;
+ u8 cur;
+
+ mutex_lock(&dp->con->lock);
+
+ if (!dp->override) {
+ const struct typec_altmode *p = typec_altmode_get_partner(alt);
+
+ dev_warn(&p->dev,
+ "firmware doesn't support alternate mode overriding\n");
+ ret = -EOPNOTSUPP;
+ goto out_unlock;
+ }
+
+ UCSI_CMD_GET_CURRENT_CAM(ctrl, dp->con->num);
+ ret = ucsi_send_command(dp->con->ucsi, &ctrl, &cur, sizeof(cur));
+ if (ret < 0 || cur != 0xff) {
+ ret = -EBUSY;
+ goto out_unlock;
+ }
+
+ ctrl.raw_cmd = UCSI_CMD_SET_NEW_CAM(dp->con->num, 0, dp->offset, 0);
+ ret = ucsi_send_command(dp->con->ucsi, &ctrl, NULL, 0);
+ if (ret < 0)
+ goto out_unlock;
+
+ dp->header = VDO(USB_TYPEC_DP_SID, 1, CMD_EXIT_MODE);
+ dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+
+ dp->vdo_data = NULL;
+ dp->vdo_size = 1;
+
+ schedule_work(&dp->work);
+
+out_unlock:
+ mutex_unlock(&dp->con->lock);
+
+ return ret;
+}
+
+/*
+ * We do not actually have access to the Status Update VDO, so we have to guess
+ * things.
+ */
+static int ucsi_displayport_status_update(struct ucsi_dp *dp)
+{
+ u32 cap = dp->alt->vdo;
+
+ dp->data.status = DP_STATUS_ENABLED;
+
+ /*
+ * If pin assignement D is supported, claiming always
+ * that Multi-function is preferred.
+ */
+ if (DP_CAP_CAPABILITY(cap) & DP_CAP_UFP_D) {
+ dp->data.status |= DP_STATUS_CON_UFP_D;
+
+ if (DP_CAP_UFP_D_PIN_ASSIGN(cap) & BIT(DP_PIN_ASSIGN_D))
+ dp->data.status |= DP_STATUS_PREFER_MULTI_FUNC;
+ } else {
+ dp->data.status |= DP_STATUS_CON_DFP_D;
+
+ if (DP_CAP_DFP_D_PIN_ASSIGN(cap) & BIT(DP_PIN_ASSIGN_D))
+ dp->data.status |= DP_STATUS_PREFER_MULTI_FUNC;
+ }
+
+ dp->vdo_data = &dp->data.status;
+ dp->vdo_size = 2;
+
+ return 0;
+}
+
+static int ucsi_displayport_configure(struct ucsi_dp *dp)
+{
+ u32 pins = DP_CONF_GET_PIN_ASSIGN(dp->data.conf);
+ struct ucsi_control ctrl;
+
+ if (!dp->override)
+ return 0;
+
+ ctrl.raw_cmd = UCSI_CMD_SET_NEW_CAM(dp->con->num, 1, dp->offset, pins);
+
+ return ucsi_send_command(dp->con->ucsi, &ctrl, NULL, 0);
+}
+
+static int ucsi_displayport_vdm(struct typec_altmode *alt,
+ u32 header, const u32 *data, int count)
+{
+ struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
+ int cmd_type = PD_VDO_CMDT(header);
+ int cmd = PD_VDO_CMD(header);
+
+ mutex_lock(&dp->con->lock);
+
+ if (!dp->override && dp->initialized) {
+ const struct typec_altmode *p = typec_altmode_get_partner(alt);
+
+ dev_warn(&p->dev,
+ "firmware doesn't support alternate mode overriding\n");
+ mutex_unlock(&dp->con->lock);
+ return -EOPNOTSUPP;
+ }
+
+ switch (cmd_type) {
+ case CMDT_INIT:
+ dp->header = VDO(USB_TYPEC_DP_SID, 1, cmd);
+ dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
+
+ switch (cmd) {
+ case DP_CMD_STATUS_UPDATE:
+ if (ucsi_displayport_status_update(dp))
+ dp->header |= VDO_CMDT(CMDT_RSP_NAK);
+ else
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+ break;
+ case DP_CMD_CONFIGURE:
+ dp->data.conf = *data;
+ if (ucsi_displayport_configure(dp)) {
+ dp->header |= VDO_CMDT(CMDT_RSP_NAK);
+ } else {
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+ if (dp->initialized)
+ ucsi_altmode_update_active(dp->con);
+ else
+ dp->initialized = true;
+ }
+ break;
+ default:
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+ break;
+ }
+
+ schedule_work(&dp->work);
+ break;
+ default:
+ break;
+ }
+
+ mutex_unlock(&dp->con->lock);
+
+ return 0;
+}
+
+static const struct typec_altmode_ops ucsi_displayport_ops = {
+ .enter = ucsi_displayport_enter,
+ .exit = ucsi_displayport_exit,
+ .vdm = ucsi_displayport_vdm,
+};
+
+static void ucsi_displayport_work(struct work_struct *work)
+{
+ struct ucsi_dp *dp = container_of(work, struct ucsi_dp, work);
+ int ret;
+
+ mutex_lock(&dp->con->lock);
+
+ ret = typec_altmode_vdm(dp->alt, dp->header,
+ dp->vdo_data, dp->vdo_size);
+ if (ret)
+ dev_err(&dp->alt->dev, "VDM 0x%x failed\n", dp->header);
+
+ dp->vdo_data = NULL;
+ dp->vdo_size = 0;
+ dp->header = 0;
+
+ mutex_unlock(&dp->con->lock);
+}
+
+void ucsi_displayport_remove_partner(struct typec_altmode *alt)
+{
+ struct ucsi_dp *dp;
+
+ if (!alt)
+ return;
+
+ dp = typec_altmode_get_drvdata(alt);
+ dp->data.conf = 0;
+ dp->data.status = 0;
+ dp->initialized = false;
+}
+
+struct typec_altmode *ucsi_register_displayport(struct ucsi_connector *con,
+ bool override, int offset,
+ struct typec_altmode_desc *desc)
+{
+ u8 all_assignments = BIT(DP_PIN_ASSIGN_C) | BIT(DP_PIN_ASSIGN_D) |
+ BIT(DP_PIN_ASSIGN_E);
+ struct typec_altmode *alt;
+ struct ucsi_dp *dp;
+
+ /* We can't rely on the firmware with the capabilities. */
+ desc->vdo |= DP_CAP_DP_SIGNALING | DP_CAP_RECEPTACLE;
+
+ /* Claiming that we support all pin assignments */
+ desc->vdo |= all_assignments << 8;
+ desc->vdo |= all_assignments << 16;
+
+ alt = typec_port_register_altmode(con->port, desc);
+ if (IS_ERR(alt))
+ return alt;
+
+ dp = devm_kzalloc(&alt->dev, sizeof(*dp), GFP_KERNEL);
+ if (!dp) {
+ typec_unregister_altmode(alt);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ INIT_WORK(&dp->work, ucsi_displayport_work);
+ dp->override = override;
+ dp->offset = offset;
+ dp->con = con;
+ dp->alt = alt;
+
+ alt->ops = &ucsi_displayport_ops;
+ typec_altmode_set_drvdata(alt, dp);
+
+ return alt;
+}
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 585ab04be940..22fb956687de 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -12,7 +12,7 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
#include "ucsi.h"
#include "trace.h"
@@ -291,9 +291,12 @@ static int ucsi_register_altmode(struct ucsi_connector *con,
u8 recipient)
{
struct typec_altmode *alt;
+ bool override;
int ret;
int i;
+ override = !!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_OVERRIDE);
+
switch (recipient) {
case UCSI_RECIPIENT_CON:
i = ucsi_next_altmode(con->port_altmode);
@@ -305,7 +308,15 @@ static int ucsi_register_altmode(struct ucsi_connector *con,
desc->mode = ucsi_altmode_next_mode(con->port_altmode,
desc->svid);
- alt = typec_port_register_altmode(con->port, desc);
+ switch (desc->svid) {
+ case USB_TYPEC_DP_SID:
+ alt = ucsi_register_displayport(con, override, i, desc);
+ break;
+ default:
+ alt = typec_port_register_altmode(con->port, desc);
+ break;
+ }
+
if (IS_ERR(alt)) {
ret = PTR_ERR(alt);
goto err;
@@ -400,6 +411,7 @@ static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient)
static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
{
+ const struct typec_altmode *pdev;
struct typec_altmode **adev;
int i = 0;
@@ -415,6 +427,11 @@ static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
}
while (adev[i]) {
+ if (recipient == UCSI_RECIPIENT_SOP &&
+ adev[i]->svid == USB_TYPEC_DP_SID) {
+ pdev = typec_altmode_get_partner(adev[i]);
+ ucsi_displayport_remove_partner((void *)pdev);
+ }
typec_unregister_altmode(adev[i]);
adev[i++] = NULL;
}
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index c416bae4b5ca..036ebf256cdd 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -406,4 +406,25 @@ int ucsi_send_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
void ucsi_altmode_update_active(struct ucsi_connector *con);
+#if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE)
+struct typec_altmode *
+ucsi_register_displayport(struct ucsi_connector *con,
+ bool override, int offset,
+ struct typec_altmode_desc *desc);
+
+void ucsi_displayport_remove_partner(struct typec_altmode *adev);
+
+#else
+static inline struct typec_altmode *
+ucsi_register_displayport(struct ucsi_connector *con,
+ bool override, int offset,
+ struct typec_altmode_desc *desc)
+{
+ return NULL;
+}
+
+static inline void
+ucsi_displayport_remove_partner(struct typec_altmode *adev) { }
+#endif /* CONFIG_TYPEC_DP_ALTMODE */
+
#endif /* __DRIVER_USB_TYPEC_UCSI_H */
--
2.20.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [v2,6/7] usb: typec: displayport: Export probe and remove functions
@ 2019-04-15 12:09 ` Heikki Krogerus
2019-04-15 12:09 ` [PATCH v2 6/7] " Heikki Krogerus
2019-04-16 0:45 ` [v2,6/7] " Ajay Gupta
0 siblings, 2 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
From: Ajay Gupta <ajayg@nvidia.com>
VirtualLink standard extends the DisplayPort Alt Mode by
utilizing also the USB 2 pins on the USB Type-C connector.
It uses the same messages as DisplayPort, but not the DP
SVID. At the time of writing, USB IF has not assigned a
Standard ID (SID) for VirtualLink, so the manufacturers of
VirtualLink adapters use their Vendor IDs as the SVID.
Since the SVID specific communication is exactly the same as
with DisplayPort alternate mode, there is no need to
implement separate driver for VirtualLink. We'll handle the
current VirtualLink adapters with probe drivers, and once
there is SVID assigned for it, we add it to the displayport
alt mode driver.
To support probing drivers, exporting the probe and remove
functions, and also changing the DP_HEADER helper macro to
use the SVID of the alternate mode device instead of the
DisplayPort alt mode SVID.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/typec/altmodes/displayport.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index 1b2afeb1eeb6..4092248a5936 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -14,7 +14,7 @@
#include <linux/usb/pd_vdo.h>
#include <linux/usb/typec_dp.h>
-#define DP_HEADER(cmd) (VDO(USB_TYPEC_DP_SID, 1, cmd) | \
+#define DP_HEADER(_dp, cmd) (VDO((_dp)->alt->svid, 1, cmd) | \
VDO_OPOS(USB_TYPEC_DP_MODE))
enum {
@@ -155,7 +155,7 @@ static int dp_altmode_configured(struct dp_altmode *dp)
static int dp_altmode_configure_vdm(struct dp_altmode *dp, u32 conf)
{
- u32 header = DP_HEADER(DP_CMD_CONFIGURE);
+ u32 header = DP_HEADER(dp, DP_CMD_CONFIGURE);
int ret;
ret = typec_altmode_notify(dp->alt, TYPEC_STATE_SAFE, &dp->data);
@@ -193,7 +193,7 @@ static void dp_altmode_work(struct work_struct *work)
dev_err(&dp->alt->dev, "failed to enter mode\n");
break;
case DP_STATE_UPDATE:
- header = DP_HEADER(DP_CMD_STATUS_UPDATE);
+ header = DP_HEADER(dp, DP_CMD_STATUS_UPDATE);
vdo = 1;
ret = typec_altmode_vdm(dp->alt, header, &vdo, 2);
if (ret)
@@ -507,7 +507,7 @@ static const struct attribute_group dp_altmode_group = {
.attrs = dp_altmode_attrs,
};
-static int dp_altmode_probe(struct typec_altmode *alt)
+int dp_altmode_probe(struct typec_altmode *alt)
{
const struct typec_altmode *port = typec_altmode_get_partner(alt);
struct dp_altmode *dp;
@@ -545,14 +545,16 @@ static int dp_altmode_probe(struct typec_altmode *alt)
return 0;
}
+EXPORT_SYMBOL_GPL(dp_altmode_probe);
-static void dp_altmode_remove(struct typec_altmode *alt)
+void dp_altmode_remove(struct typec_altmode *alt)
{
struct dp_altmode *dp = typec_altmode_get_drvdata(alt);
sysfs_remove_group(&alt->dev.kobj, &dp_altmode_group);
cancel_work_sync(&dp->work);
}
+EXPORT_SYMBOL_GPL(dp_altmode_remove);
static const struct typec_device_id dp_typec_id[] = {
{ USB_TYPEC_DP_SID, USB_TYPEC_DP_MODE },
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 6/7] usb: typec: displayport: Export probe and remove functions
2019-04-15 12:09 ` [v2,6/7] usb: typec: displayport: Export probe and remove functions Heikki Krogerus
@ 2019-04-15 12:09 ` Heikki Krogerus
2019-04-16 0:45 ` [v2,6/7] " Ajay Gupta
1 sibling, 0 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
From: Ajay Gupta <ajayg@nvidia.com>
VirtualLink standard extends the DisplayPort Alt Mode by
utilizing also the USB 2 pins on the USB Type-C connector.
It uses the same messages as DisplayPort, but not the DP
SVID. At the time of writing, USB IF has not assigned a
Standard ID (SID) for VirtualLink, so the manufacturers of
VirtualLink adapters use their Vendor IDs as the SVID.
Since the SVID specific communication is exactly the same as
with DisplayPort alternate mode, there is no need to
implement separate driver for VirtualLink. We'll handle the
current VirtualLink adapters with probe drivers, and once
there is SVID assigned for it, we add it to the displayport
alt mode driver.
To support probing drivers, exporting the probe and remove
functions, and also changing the DP_HEADER helper macro to
use the SVID of the alternate mode device instead of the
DisplayPort alt mode SVID.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/typec/altmodes/displayport.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index 1b2afeb1eeb6..4092248a5936 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -14,7 +14,7 @@
#include <linux/usb/pd_vdo.h>
#include <linux/usb/typec_dp.h>
-#define DP_HEADER(cmd) (VDO(USB_TYPEC_DP_SID, 1, cmd) | \
+#define DP_HEADER(_dp, cmd) (VDO((_dp)->alt->svid, 1, cmd) | \
VDO_OPOS(USB_TYPEC_DP_MODE))
enum {
@@ -155,7 +155,7 @@ static int dp_altmode_configured(struct dp_altmode *dp)
static int dp_altmode_configure_vdm(struct dp_altmode *dp, u32 conf)
{
- u32 header = DP_HEADER(DP_CMD_CONFIGURE);
+ u32 header = DP_HEADER(dp, DP_CMD_CONFIGURE);
int ret;
ret = typec_altmode_notify(dp->alt, TYPEC_STATE_SAFE, &dp->data);
@@ -193,7 +193,7 @@ static void dp_altmode_work(struct work_struct *work)
dev_err(&dp->alt->dev, "failed to enter mode\n");
break;
case DP_STATE_UPDATE:
- header = DP_HEADER(DP_CMD_STATUS_UPDATE);
+ header = DP_HEADER(dp, DP_CMD_STATUS_UPDATE);
vdo = 1;
ret = typec_altmode_vdm(dp->alt, header, &vdo, 2);
if (ret)
@@ -507,7 +507,7 @@ static const struct attribute_group dp_altmode_group = {
.attrs = dp_altmode_attrs,
};
-static int dp_altmode_probe(struct typec_altmode *alt)
+int dp_altmode_probe(struct typec_altmode *alt)
{
const struct typec_altmode *port = typec_altmode_get_partner(alt);
struct dp_altmode *dp;
@@ -545,14 +545,16 @@ static int dp_altmode_probe(struct typec_altmode *alt)
return 0;
}
+EXPORT_SYMBOL_GPL(dp_altmode_probe);
-static void dp_altmode_remove(struct typec_altmode *alt)
+void dp_altmode_remove(struct typec_altmode *alt)
{
struct dp_altmode *dp = typec_altmode_get_drvdata(alt);
sysfs_remove_group(&alt->dev.kobj, &dp_altmode_group);
cancel_work_sync(&dp->work);
}
+EXPORT_SYMBOL_GPL(dp_altmode_remove);
static const struct typec_device_id dp_typec_id[] = {
{ USB_TYPEC_DP_SID, USB_TYPEC_DP_MODE },
--
2.20.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [v2,6/7] usb: typec: displayport: Export probe and remove functions
@ 2019-04-16 0:45 ` Ajay Gupta
2019-04-16 0:45 ` [PATCH v2 6/7] " Ajay Gupta
2019-04-16 6:27 ` [v2,6/7] " Heikki Krogerus
0 siblings, 2 replies; 28+ messages in thread
From: Ajay Gupta @ 2019-04-16 0:45 UTC (permalink / raw)
To: Heikki Krogerus, Greg Kroah-Hartman; +Cc: linux-usb@vger.kernel.org
Hi Heikki,
> -----Original Message-----
> From: linux-usb-owner@vger.kernel.org <linux-usb-owner@vger.kernel.org> On
> Behalf Of Heikki Krogerus
> Sent: Monday, April 15, 2019 5:10 AM
> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Ajay Gupta <ajayg@nvidia.com>; linux-usb@vger.kernel.org
> Subject: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove
> functions
>
> From: Ajay Gupta <ajayg@nvidia.com>
>
> VirtualLink standard extends the DisplayPort Alt Mode by utilizing also the USB 2
> pins on the USB Type-C connector.
> It uses the same messages as DisplayPort, but not the DP SVID. At the time of
> writing, USB IF has not assigned a Standard ID (SID) for VirtualLink, so the
> manufacturers of VirtualLink adapters use their Vendor IDs as the SVID.
>
> Since the SVID specific communication is exactly the same as with DisplayPort
> alternate mode, there is no need to implement separate driver for VirtualLink.
> We'll handle the current VirtualLink adapters with probe drivers, and once there
> is SVID assigned for it, we add it to the displayport alt mode driver.
>
> To support probing drivers, exporting the probe and remove functions, and also
> changing the DP_HEADER helper macro to use the SVID of the alternate mode
> device instead of the DisplayPort alt mode SVID.
>
> Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> drivers/usb/typec/altmodes/displayport.c | 12 +++++++-----
> 1 file changed, 7 insertions(+), 5 deletions(-)
Looks like you missed adding displayport.h file. It is available in original patch below,
https://marc.info/?l=linux-usb&m=155492587224379&w=2
Thanks
> nvpublic
> diff --git a/drivers/usb/typec/altmodes/displayport.c
> b/drivers/usb/typec/altmodes/displayport.c
> index 1b2afeb1eeb6..4092248a5936 100644
> --- a/drivers/usb/typec/altmodes/displayport.c
> +++ b/drivers/usb/typec/altmodes/displayport.c
> @@ -14,7 +14,7 @@
> #include <linux/usb/pd_vdo.h>
> #include <linux/usb/typec_dp.h>
>
> -#define DP_HEADER(cmd) (VDO(USB_TYPEC_DP_SID, 1,
> cmd) | \
> +#define DP_HEADER(_dp, cmd) (VDO((_dp)->alt->svid, 1, cmd) | \
> VDO_OPOS(USB_TYPEC_DP_MODE))
>
> enum {
> @@ -155,7 +155,7 @@ static int dp_altmode_configured(struct dp_altmode
> *dp)
>
> static int dp_altmode_configure_vdm(struct dp_altmode *dp, u32 conf) {
> - u32 header = DP_HEADER(DP_CMD_CONFIGURE);
> + u32 header = DP_HEADER(dp, DP_CMD_CONFIGURE);
> int ret;
>
> ret = typec_altmode_notify(dp->alt, TYPEC_STATE_SAFE, &dp->data);
> @@ -193,7 +193,7 @@ static void dp_altmode_work(struct work_struct *work)
> dev_err(&dp->alt->dev, "failed to enter mode\n");
> break;
> case DP_STATE_UPDATE:
> - header = DP_HEADER(DP_CMD_STATUS_UPDATE);
> + header = DP_HEADER(dp, DP_CMD_STATUS_UPDATE);
> vdo = 1;
> ret = typec_altmode_vdm(dp->alt, header, &vdo, 2);
> if (ret)
> @@ -507,7 +507,7 @@ static const struct attribute_group dp_altmode_group =
> {
> .attrs = dp_altmode_attrs,
> };
>
> -static int dp_altmode_probe(struct typec_altmode *alt)
> +int dp_altmode_probe(struct typec_altmode *alt)
> {
> const struct typec_altmode *port = typec_altmode_get_partner(alt);
> struct dp_altmode *dp;
> @@ -545,14 +545,16 @@ static int dp_altmode_probe(struct typec_altmode
> *alt)
>
> return 0;
> }
> +EXPORT_SYMBOL_GPL(dp_altmode_probe);
>
> -static void dp_altmode_remove(struct typec_altmode *alt)
> +void dp_altmode_remove(struct typec_altmode *alt)
> {
> struct dp_altmode *dp = typec_altmode_get_drvdata(alt);
>
> sysfs_remove_group(&alt->dev.kobj, &dp_altmode_group);
> cancel_work_sync(&dp->work);
> }
> +EXPORT_SYMBOL_GPL(dp_altmode_remove);
>
> static const struct typec_device_id dp_typec_id[] = {
> { USB_TYPEC_DP_SID, USB_TYPEC_DP_MODE },
> --
> 2.20.1
^ permalink raw reply [flat|nested] 28+ messages in thread* RE: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove functions
2019-04-16 0:45 ` [v2,6/7] " Ajay Gupta
@ 2019-04-16 0:45 ` Ajay Gupta
2019-04-16 6:27 ` [v2,6/7] " Heikki Krogerus
1 sibling, 0 replies; 28+ messages in thread
From: Ajay Gupta @ 2019-04-16 0:45 UTC (permalink / raw)
To: Heikki Krogerus, Greg Kroah-Hartman; +Cc: linux-usb@vger.kernel.org
Hi Heikki,
> -----Original Message-----
> From: linux-usb-owner@vger.kernel.org <linux-usb-owner@vger.kernel.org> On
> Behalf Of Heikki Krogerus
> Sent: Monday, April 15, 2019 5:10 AM
> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Ajay Gupta <ajayg@nvidia.com>; linux-usb@vger.kernel.org
> Subject: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove
> functions
>
> From: Ajay Gupta <ajayg@nvidia.com>
>
> VirtualLink standard extends the DisplayPort Alt Mode by utilizing also the USB 2
> pins on the USB Type-C connector.
> It uses the same messages as DisplayPort, but not the DP SVID. At the time of
> writing, USB IF has not assigned a Standard ID (SID) for VirtualLink, so the
> manufacturers of VirtualLink adapters use their Vendor IDs as the SVID.
>
> Since the SVID specific communication is exactly the same as with DisplayPort
> alternate mode, there is no need to implement separate driver for VirtualLink.
> We'll handle the current VirtualLink adapters with probe drivers, and once there
> is SVID assigned for it, we add it to the displayport alt mode driver.
>
> To support probing drivers, exporting the probe and remove functions, and also
> changing the DP_HEADER helper macro to use the SVID of the alternate mode
> device instead of the DisplayPort alt mode SVID.
>
> Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> drivers/usb/typec/altmodes/displayport.c | 12 +++++++-----
> 1 file changed, 7 insertions(+), 5 deletions(-)
Looks like you missed adding displayport.h file. It is available in original patch below,
https://marc.info/?l=linux-usb&m=155492587224379&w=2
Thanks
> nvpublic
> diff --git a/drivers/usb/typec/altmodes/displayport.c
> b/drivers/usb/typec/altmodes/displayport.c
> index 1b2afeb1eeb6..4092248a5936 100644
> --- a/drivers/usb/typec/altmodes/displayport.c
> +++ b/drivers/usb/typec/altmodes/displayport.c
> @@ -14,7 +14,7 @@
> #include <linux/usb/pd_vdo.h>
> #include <linux/usb/typec_dp.h>
>
> -#define DP_HEADER(cmd) (VDO(USB_TYPEC_DP_SID, 1,
> cmd) | \
> +#define DP_HEADER(_dp, cmd) (VDO((_dp)->alt->svid, 1, cmd) | \
> VDO_OPOS(USB_TYPEC_DP_MODE))
>
> enum {
> @@ -155,7 +155,7 @@ static int dp_altmode_configured(struct dp_altmode
> *dp)
>
> static int dp_altmode_configure_vdm(struct dp_altmode *dp, u32 conf) {
> - u32 header = DP_HEADER(DP_CMD_CONFIGURE);
> + u32 header = DP_HEADER(dp, DP_CMD_CONFIGURE);
> int ret;
>
> ret = typec_altmode_notify(dp->alt, TYPEC_STATE_SAFE, &dp->data);
> @@ -193,7 +193,7 @@ static void dp_altmode_work(struct work_struct *work)
> dev_err(&dp->alt->dev, "failed to enter mode\n");
> break;
> case DP_STATE_UPDATE:
> - header = DP_HEADER(DP_CMD_STATUS_UPDATE);
> + header = DP_HEADER(dp, DP_CMD_STATUS_UPDATE);
> vdo = 1;
> ret = typec_altmode_vdm(dp->alt, header, &vdo, 2);
> if (ret)
> @@ -507,7 +507,7 @@ static const struct attribute_group dp_altmode_group =
> {
> .attrs = dp_altmode_attrs,
> };
>
> -static int dp_altmode_probe(struct typec_altmode *alt)
> +int dp_altmode_probe(struct typec_altmode *alt)
> {
> const struct typec_altmode *port = typec_altmode_get_partner(alt);
> struct dp_altmode *dp;
> @@ -545,14 +545,16 @@ static int dp_altmode_probe(struct typec_altmode
> *alt)
>
> return 0;
> }
> +EXPORT_SYMBOL_GPL(dp_altmode_probe);
>
> -static void dp_altmode_remove(struct typec_altmode *alt)
> +void dp_altmode_remove(struct typec_altmode *alt)
> {
> struct dp_altmode *dp = typec_altmode_get_drvdata(alt);
>
> sysfs_remove_group(&alt->dev.kobj, &dp_altmode_group);
> cancel_work_sync(&dp->work);
> }
> +EXPORT_SYMBOL_GPL(dp_altmode_remove);
>
> static const struct typec_device_id dp_typec_id[] = {
> { USB_TYPEC_DP_SID, USB_TYPEC_DP_MODE },
> --
> 2.20.1
^ permalink raw reply [flat|nested] 28+ messages in thread* [v2,6/7] usb: typec: displayport: Export probe and remove functions
@ 2019-04-16 6:27 ` Heikki Krogerus
2019-04-16 6:27 ` [PATCH v2 6/7] " Heikki Krogerus
2019-04-16 7:46 ` [v2,6/7] " Heikki Krogerus
0 siblings, 2 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-16 6:27 UTC (permalink / raw)
To: Ajay Gupta; +Cc: Greg Kroah-Hartman, linux-usb@vger.kernel.org
On Tue, Apr 16, 2019 at 12:45:12AM +0000, Ajay Gupta wrote:
> Hi Heikki,
>
> > -----Original Message-----
> > From: linux-usb-owner@vger.kernel.org <linux-usb-owner@vger.kernel.org> On
> > Behalf Of Heikki Krogerus
> > Sent: Monday, April 15, 2019 5:10 AM
> > To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Cc: Ajay Gupta <ajayg@nvidia.com>; linux-usb@vger.kernel.org
> > Subject: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove
> > functions
> >
> > From: Ajay Gupta <ajayg@nvidia.com>
> >
> > VirtualLink standard extends the DisplayPort Alt Mode by utilizing also the USB 2
> > pins on the USB Type-C connector.
> > It uses the same messages as DisplayPort, but not the DP SVID. At the time of
> > writing, USB IF has not assigned a Standard ID (SID) for VirtualLink, so the
> > manufacturers of VirtualLink adapters use their Vendor IDs as the SVID.
> >
> > Since the SVID specific communication is exactly the same as with DisplayPort
> > alternate mode, there is no need to implement separate driver for VirtualLink.
> > We'll handle the current VirtualLink adapters with probe drivers, and once there
> > is SVID assigned for it, we add it to the displayport alt mode driver.
> >
> > To support probing drivers, exporting the probe and remove functions, and also
> > changing the DP_HEADER helper macro to use the SVID of the alternate mode
> > device instead of the DisplayPort alt mode SVID.
> >
> > Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
> > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > ---
> > drivers/usb/typec/altmodes/displayport.c | 12 +++++++-----
> > 1 file changed, 7 insertions(+), 5 deletions(-)
> Looks like you missed adding displayport.h file. It is available in original patch below,
> https://marc.info/?l=linux-usb&m=155492587224379&w=2
That's the one I picked, and I did compile the driver as well.. I'm
not sure what I've done, but I'll resend the series.
Sorry for the hassle.
thanks,
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove functions
2019-04-16 6:27 ` [v2,6/7] " Heikki Krogerus
@ 2019-04-16 6:27 ` Heikki Krogerus
2019-04-16 7:46 ` [v2,6/7] " Heikki Krogerus
1 sibling, 0 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-16 6:27 UTC (permalink / raw)
To: Ajay Gupta; +Cc: Greg Kroah-Hartman, linux-usb@vger.kernel.org
On Tue, Apr 16, 2019 at 12:45:12AM +0000, Ajay Gupta wrote:
> Hi Heikki,
>
> > -----Original Message-----
> > From: linux-usb-owner@vger.kernel.org <linux-usb-owner@vger.kernel.org> On
> > Behalf Of Heikki Krogerus
> > Sent: Monday, April 15, 2019 5:10 AM
> > To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Cc: Ajay Gupta <ajayg@nvidia.com>; linux-usb@vger.kernel.org
> > Subject: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove
> > functions
> >
> > From: Ajay Gupta <ajayg@nvidia.com>
> >
> > VirtualLink standard extends the DisplayPort Alt Mode by utilizing also the USB 2
> > pins on the USB Type-C connector.
> > It uses the same messages as DisplayPort, but not the DP SVID. At the time of
> > writing, USB IF has not assigned a Standard ID (SID) for VirtualLink, so the
> > manufacturers of VirtualLink adapters use their Vendor IDs as the SVID.
> >
> > Since the SVID specific communication is exactly the same as with DisplayPort
> > alternate mode, there is no need to implement separate driver for VirtualLink.
> > We'll handle the current VirtualLink adapters with probe drivers, and once there
> > is SVID assigned for it, we add it to the displayport alt mode driver.
> >
> > To support probing drivers, exporting the probe and remove functions, and also
> > changing the DP_HEADER helper macro to use the SVID of the alternate mode
> > device instead of the DisplayPort alt mode SVID.
> >
> > Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
> > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > ---
> > drivers/usb/typec/altmodes/displayport.c | 12 +++++++-----
> > 1 file changed, 7 insertions(+), 5 deletions(-)
> Looks like you missed adding displayport.h file. It is available in original patch below,
> https://marc.info/?l=linux-usb&m=155492587224379&w=2
That's the one I picked, and I did compile the driver as well.. I'm
not sure what I've done, but I'll resend the series.
Sorry for the hassle.
thanks,
--
heikki
^ permalink raw reply [flat|nested] 28+ messages in thread
* [v2,6/7] usb: typec: displayport: Export probe and remove functions
@ 2019-04-16 7:46 ` Heikki Krogerus
2019-04-16 7:46 ` [PATCH v2 6/7] " Heikki Krogerus
2019-04-16 10:03 ` [v2,6/7] " Greg Kroah-Hartman
0 siblings, 2 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-16 7:46 UTC (permalink / raw)
To: Ajay Gupta; +Cc: Greg Kroah-Hartman, linux-usb@vger.kernel.org
On Tue, Apr 16, 2019 at 09:27:03AM +0300, Heikki Krogerus wrote:
> On Tue, Apr 16, 2019 at 12:45:12AM +0000, Ajay Gupta wrote:
> > Hi Heikki,
> >
> > > -----Original Message-----
> > > From: linux-usb-owner@vger.kernel.org <linux-usb-owner@vger.kernel.org> On
> > > Behalf Of Heikki Krogerus
> > > Sent: Monday, April 15, 2019 5:10 AM
> > > To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > Cc: Ajay Gupta <ajayg@nvidia.com>; linux-usb@vger.kernel.org
> > > Subject: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove
> > > functions
> > >
> > > From: Ajay Gupta <ajayg@nvidia.com>
> > >
> > > VirtualLink standard extends the DisplayPort Alt Mode by utilizing also the USB 2
> > > pins on the USB Type-C connector.
> > > It uses the same messages as DisplayPort, but not the DP SVID. At the time of
> > > writing, USB IF has not assigned a Standard ID (SID) for VirtualLink, so the
> > > manufacturers of VirtualLink adapters use their Vendor IDs as the SVID.
> > >
> > > Since the SVID specific communication is exactly the same as with DisplayPort
> > > alternate mode, there is no need to implement separate driver for VirtualLink.
> > > We'll handle the current VirtualLink adapters with probe drivers, and once there
> > > is SVID assigned for it, we add it to the displayport alt mode driver.
> > >
> > > To support probing drivers, exporting the probe and remove functions, and also
> > > changing the DP_HEADER helper macro to use the SVID of the alternate mode
> > > device instead of the DisplayPort alt mode SVID.
> > >
> > > Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > > Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
> > > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > > ---
> > > drivers/usb/typec/altmodes/displayport.c | 12 +++++++-----
> > > 1 file changed, 7 insertions(+), 5 deletions(-)
> > Looks like you missed adding displayport.h file. It is available in original patch below,
> > https://marc.info/?l=linux-usb&m=155492587224379&w=2
>
> That's the one I picked, and I did compile the driver as well.. I'm
> not sure what I've done, but I'll resend the series.
It looks like I broke the patch after I did a small modification to
it. I had changed your "From" address so it matches your singed-of-by
address. My compile test passed because the header was an untracked
file :-)
Sorry again. Let's do one more test round, and resend.
thanks,
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove functions
2019-04-16 7:46 ` [v2,6/7] " Heikki Krogerus
@ 2019-04-16 7:46 ` Heikki Krogerus
2019-04-16 10:03 ` [v2,6/7] " Greg Kroah-Hartman
1 sibling, 0 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-16 7:46 UTC (permalink / raw)
To: Ajay Gupta; +Cc: Greg Kroah-Hartman, linux-usb@vger.kernel.org
On Tue, Apr 16, 2019 at 09:27:03AM +0300, Heikki Krogerus wrote:
> On Tue, Apr 16, 2019 at 12:45:12AM +0000, Ajay Gupta wrote:
> > Hi Heikki,
> >
> > > -----Original Message-----
> > > From: linux-usb-owner@vger.kernel.org <linux-usb-owner@vger.kernel.org> On
> > > Behalf Of Heikki Krogerus
> > > Sent: Monday, April 15, 2019 5:10 AM
> > > To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > Cc: Ajay Gupta <ajayg@nvidia.com>; linux-usb@vger.kernel.org
> > > Subject: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove
> > > functions
> > >
> > > From: Ajay Gupta <ajayg@nvidia.com>
> > >
> > > VirtualLink standard extends the DisplayPort Alt Mode by utilizing also the USB 2
> > > pins on the USB Type-C connector.
> > > It uses the same messages as DisplayPort, but not the DP SVID. At the time of
> > > writing, USB IF has not assigned a Standard ID (SID) for VirtualLink, so the
> > > manufacturers of VirtualLink adapters use their Vendor IDs as the SVID.
> > >
> > > Since the SVID specific communication is exactly the same as with DisplayPort
> > > alternate mode, there is no need to implement separate driver for VirtualLink.
> > > We'll handle the current VirtualLink adapters with probe drivers, and once there
> > > is SVID assigned for it, we add it to the displayport alt mode driver.
> > >
> > > To support probing drivers, exporting the probe and remove functions, and also
> > > changing the DP_HEADER helper macro to use the SVID of the alternate mode
> > > device instead of the DisplayPort alt mode SVID.
> > >
> > > Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > > Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
> > > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > > ---
> > > drivers/usb/typec/altmodes/displayport.c | 12 +++++++-----
> > > 1 file changed, 7 insertions(+), 5 deletions(-)
> > Looks like you missed adding displayport.h file. It is available in original patch below,
> > https://marc.info/?l=linux-usb&m=155492587224379&w=2
>
> That's the one I picked, and I did compile the driver as well.. I'm
> not sure what I've done, but I'll resend the series.
It looks like I broke the patch after I did a small modification to
it. I had changed your "From" address so it matches your singed-of-by
address. My compile test passed because the header was an untracked
file :-)
Sorry again. Let's do one more test round, and resend.
thanks,
--
heikki
^ permalink raw reply [flat|nested] 28+ messages in thread
* [v2,6/7] usb: typec: displayport: Export probe and remove functions
@ 2019-04-16 10:03 ` Greg Kroah-Hartman
2019-04-16 10:03 ` [PATCH v2 6/7] " Greg Kroah-Hartman
0 siblings, 1 reply; 28+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-16 10:03 UTC (permalink / raw)
To: Heikki Krogerus; +Cc: Ajay Gupta, linux-usb@vger.kernel.org
On Tue, Apr 16, 2019 at 10:46:07AM +0300, Heikki Krogerus wrote:
> On Tue, Apr 16, 2019 at 09:27:03AM +0300, Heikki Krogerus wrote:
> > On Tue, Apr 16, 2019 at 12:45:12AM +0000, Ajay Gupta wrote:
> > > Hi Heikki,
> > >
> > > > -----Original Message-----
> > > > From: linux-usb-owner@vger.kernel.org <linux-usb-owner@vger.kernel.org> On
> > > > Behalf Of Heikki Krogerus
> > > > Sent: Monday, April 15, 2019 5:10 AM
> > > > To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > > Cc: Ajay Gupta <ajayg@nvidia.com>; linux-usb@vger.kernel.org
> > > > Subject: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove
> > > > functions
> > > >
> > > > From: Ajay Gupta <ajayg@nvidia.com>
> > > >
> > > > VirtualLink standard extends the DisplayPort Alt Mode by utilizing also the USB 2
> > > > pins on the USB Type-C connector.
> > > > It uses the same messages as DisplayPort, but not the DP SVID. At the time of
> > > > writing, USB IF has not assigned a Standard ID (SID) for VirtualLink, so the
> > > > manufacturers of VirtualLink adapters use their Vendor IDs as the SVID.
> > > >
> > > > Since the SVID specific communication is exactly the same as with DisplayPort
> > > > alternate mode, there is no need to implement separate driver for VirtualLink.
> > > > We'll handle the current VirtualLink adapters with probe drivers, and once there
> > > > is SVID assigned for it, we add it to the displayport alt mode driver.
> > > >
> > > > To support probing drivers, exporting the probe and remove functions, and also
> > > > changing the DP_HEADER helper macro to use the SVID of the alternate mode
> > > > device instead of the DisplayPort alt mode SVID.
> > > >
> > > > Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > > > Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
> > > > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > > > ---
> > > > drivers/usb/typec/altmodes/displayport.c | 12 +++++++-----
> > > > 1 file changed, 7 insertions(+), 5 deletions(-)
> > > Looks like you missed adding displayport.h file. It is available in original patch below,
> > > https://marc.info/?l=linux-usb&m=155492587224379&w=2
> >
> > That's the one I picked, and I did compile the driver as well.. I'm
> > not sure what I've done, but I'll resend the series.
>
> It looks like I broke the patch after I did a small modification to
> it. I had changed your "From" address so it matches your singed-of-by
> address. My compile test passed because the header was an untracked
> file :-)
>
> Sorry again. Let's do one more test round, and resend.
Ok, dropping this whole series from my queue now, thanks.
greg k-h
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove functions
2019-04-16 10:03 ` [v2,6/7] " Greg Kroah-Hartman
@ 2019-04-16 10:03 ` Greg Kroah-Hartman
0 siblings, 0 replies; 28+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-16 10:03 UTC (permalink / raw)
To: Heikki Krogerus; +Cc: Ajay Gupta, linux-usb@vger.kernel.org
On Tue, Apr 16, 2019 at 10:46:07AM +0300, Heikki Krogerus wrote:
> On Tue, Apr 16, 2019 at 09:27:03AM +0300, Heikki Krogerus wrote:
> > On Tue, Apr 16, 2019 at 12:45:12AM +0000, Ajay Gupta wrote:
> > > Hi Heikki,
> > >
> > > > -----Original Message-----
> > > > From: linux-usb-owner@vger.kernel.org <linux-usb-owner@vger.kernel.org> On
> > > > Behalf Of Heikki Krogerus
> > > > Sent: Monday, April 15, 2019 5:10 AM
> > > > To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > > Cc: Ajay Gupta <ajayg@nvidia.com>; linux-usb@vger.kernel.org
> > > > Subject: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove
> > > > functions
> > > >
> > > > From: Ajay Gupta <ajayg@nvidia.com>
> > > >
> > > > VirtualLink standard extends the DisplayPort Alt Mode by utilizing also the USB 2
> > > > pins on the USB Type-C connector.
> > > > It uses the same messages as DisplayPort, but not the DP SVID. At the time of
> > > > writing, USB IF has not assigned a Standard ID (SID) for VirtualLink, so the
> > > > manufacturers of VirtualLink adapters use their Vendor IDs as the SVID.
> > > >
> > > > Since the SVID specific communication is exactly the same as with DisplayPort
> > > > alternate mode, there is no need to implement separate driver for VirtualLink.
> > > > We'll handle the current VirtualLink adapters with probe drivers, and once there
> > > > is SVID assigned for it, we add it to the displayport alt mode driver.
> > > >
> > > > To support probing drivers, exporting the probe and remove functions, and also
> > > > changing the DP_HEADER helper macro to use the SVID of the alternate mode
> > > > device instead of the DisplayPort alt mode SVID.
> > > >
> > > > Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > > > Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
> > > > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > > > ---
> > > > drivers/usb/typec/altmodes/displayport.c | 12 +++++++-----
> > > > 1 file changed, 7 insertions(+), 5 deletions(-)
> > > Looks like you missed adding displayport.h file. It is available in original patch below,
> > > https://marc.info/?l=linux-usb&m=155492587224379&w=2
> >
> > That's the one I picked, and I did compile the driver as well.. I'm
> > not sure what I've done, but I'll resend the series.
>
> It looks like I broke the patch after I did a small modification to
> it. I had changed your "From" address so it matches your singed-of-by
> address. My compile test passed because the header was an untracked
> file :-)
>
> Sorry again. Let's do one more test round, and resend.
Ok, dropping this whole series from my queue now, thanks.
greg k-h
^ permalink raw reply [flat|nested] 28+ messages in thread
* [v2,7/7] usb: typec: Add driver for NVIDIA Alt Modes
@ 2019-04-15 12:09 ` Heikki Krogerus
2019-04-15 12:09 ` [PATCH v2 7/7] " Heikki Krogerus
` (2 more replies)
0 siblings, 3 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
From: Ajay Gupta <ajayg@nvidia.com>
Latest NVIDIA GPUs support VirtualLink device. Since USBIF
has not assigned a Standard ID (SID) for VirtualLink
so using NVIDA VID 0x955 as SVID.
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/typec/altmodes/Kconfig | 10 +++++++
drivers/usb/typec/altmodes/Makefile | 2 ++
drivers/usb/typec/altmodes/nvidia.c | 44 +++++++++++++++++++++++++++++
drivers/usb/typec/ucsi/ucsi.c | 4 ++-
include/linux/usb/typec_dp.h | 5 ++++
5 files changed, 64 insertions(+), 1 deletion(-)
create mode 100644 drivers/usb/typec/altmodes/nvidia.c
diff --git a/drivers/usb/typec/altmodes/Kconfig b/drivers/usb/typec/altmodes/Kconfig
index ef2226eb7a33..187690fd1a5b 100644
--- a/drivers/usb/typec/altmodes/Kconfig
+++ b/drivers/usb/typec/altmodes/Kconfig
@@ -12,4 +12,14 @@ config TYPEC_DP_ALTMODE
To compile this driver as a module, choose M here: the
module will be called typec_displayport.
+config TYPEC_NVIDIA_ALTMODE
+ tristate "NVIDIA Alternate Mode driver"
+ depends on TYPEC_DP_ALTMODE
+ help
+ Latest NVIDIA GPUs support VirtualLink devices. Select this
+ to enable support for VirtualLink devices with NVIDIA GPUs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called typec_displayport.
+
endmenu
diff --git a/drivers/usb/typec/altmodes/Makefile b/drivers/usb/typec/altmodes/Makefile
index eda8456f1c92..45717548b396 100644
--- a/drivers/usb/typec/altmodes/Makefile
+++ b/drivers/usb/typec/altmodes/Makefile
@@ -2,3 +2,5 @@
obj-$(CONFIG_TYPEC_DP_ALTMODE) += typec_displayport.o
typec_displayport-y := displayport.o
+obj-$(CONFIG_TYPEC_NVIDIA_ALTMODE) += typec_nvidia.o
+typec_nvidia-y := nvidia.o
diff --git a/drivers/usb/typec/altmodes/nvidia.c b/drivers/usb/typec/altmodes/nvidia.c
new file mode 100644
index 000000000000..c36769736405
--- /dev/null
+++ b/drivers/usb/typec/altmodes/nvidia.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 NVIDIA Corporation. All rights reserved.
+ *
+ * NVIDIA USB Type-C Alt Mode Driver
+ */
+#include <linux/module.h>
+#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
+#include "displayport.h"
+
+static int nvidia_altmode_probe(struct typec_altmode *alt)
+{
+ if (alt->svid == USB_TYPEC_NVIDIA_VLINK_SID)
+ return dp_altmode_probe(alt);
+ else
+ return -ENOTSUPP;
+}
+
+static void nvidia_altmode_remove(struct typec_altmode *alt)
+{
+ if (alt->svid == USB_TYPEC_NVIDIA_VLINK_SID)
+ dp_altmode_remove(alt);
+}
+
+static const struct typec_device_id nvidia_typec_id[] = {
+ { USB_TYPEC_NVIDIA_VLINK_SID, TYPEC_ANY_MODE },
+ { },
+};
+MODULE_DEVICE_TABLE(typec, nvidia_typec_id);
+
+static struct typec_altmode_driver nvidia_altmode_driver = {
+ .id_table = nvidia_typec_id,
+ .probe = nvidia_altmode_probe,
+ .remove = nvidia_altmode_remove,
+ .driver = {
+ .name = "typec_nvidia",
+ .owner = THIS_MODULE,
+ },
+};
+module_typec_altmode_driver(nvidia_altmode_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("NVIDIA USB Type-C Alt Mode Driver");
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 22fb956687de..999ae50d6e49 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -310,6 +310,7 @@ static int ucsi_register_altmode(struct ucsi_connector *con,
switch (desc->svid) {
case USB_TYPEC_DP_SID:
+ case USB_TYPEC_NVIDIA_VLINK_SID:
alt = ucsi_register_displayport(con, override, i, desc);
break;
default:
@@ -428,7 +429,8 @@ static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
while (adev[i]) {
if (recipient == UCSI_RECIPIENT_SOP &&
- adev[i]->svid == USB_TYPEC_DP_SID) {
+ (adev[i]->svid == USB_TYPEC_DP_SID ||
+ adev[i]->svid == USB_TYPEC_NVIDIA_VLINK_SID)) {
pdev = typec_altmode_get_partner(adev[i]);
ucsi_displayport_remove_partner((void *)pdev);
}
diff --git a/include/linux/usb/typec_dp.h b/include/linux/usb/typec_dp.h
index 7fa12ef8d09a..fc4c7edb2e8a 100644
--- a/include/linux/usb/typec_dp.h
+++ b/include/linux/usb/typec_dp.h
@@ -5,6 +5,11 @@
#include <linux/usb/typec_altmode.h>
#define USB_TYPEC_DP_SID 0xff01
+/* USB IF has not assigned a Standard ID (SID) for VirtualLink,
+ * so the manufacturers of VirtualLink adapters use their Vendor
+ * IDs as the SVID.
+ */
+#define USB_TYPEC_NVIDIA_VLINK_SID 0x955 /* NVIDIA VirtualLink */
#define USB_TYPEC_DP_MODE 1
/*
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 7/7] usb: typec: Add driver for NVIDIA Alt Modes
2019-04-15 12:09 ` [v2,7/7] usb: typec: Add driver for NVIDIA Alt Modes Heikki Krogerus
@ 2019-04-15 12:09 ` Heikki Krogerus
2019-04-15 21:12 ` kbuild test robot
2019-04-16 10:02 ` [v2,7/7] " Greg Kroah-Hartman
2 siblings, 0 replies; 28+ messages in thread
From: Heikki Krogerus @ 2019-04-15 12:09 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ajay Gupta, linux-usb
From: Ajay Gupta <ajayg@nvidia.com>
Latest NVIDIA GPUs support VirtualLink device. Since USBIF
has not assigned a Standard ID (SID) for VirtualLink
so using NVIDA VID 0x955 as SVID.
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/typec/altmodes/Kconfig | 10 +++++++
drivers/usb/typec/altmodes/Makefile | 2 ++
drivers/usb/typec/altmodes/nvidia.c | 44 +++++++++++++++++++++++++++++
drivers/usb/typec/ucsi/ucsi.c | 4 ++-
include/linux/usb/typec_dp.h | 5 ++++
5 files changed, 64 insertions(+), 1 deletion(-)
create mode 100644 drivers/usb/typec/altmodes/nvidia.c
diff --git a/drivers/usb/typec/altmodes/Kconfig b/drivers/usb/typec/altmodes/Kconfig
index ef2226eb7a33..187690fd1a5b 100644
--- a/drivers/usb/typec/altmodes/Kconfig
+++ b/drivers/usb/typec/altmodes/Kconfig
@@ -12,4 +12,14 @@ config TYPEC_DP_ALTMODE
To compile this driver as a module, choose M here: the
module will be called typec_displayport.
+config TYPEC_NVIDIA_ALTMODE
+ tristate "NVIDIA Alternate Mode driver"
+ depends on TYPEC_DP_ALTMODE
+ help
+ Latest NVIDIA GPUs support VirtualLink devices. Select this
+ to enable support for VirtualLink devices with NVIDIA GPUs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called typec_displayport.
+
endmenu
diff --git a/drivers/usb/typec/altmodes/Makefile b/drivers/usb/typec/altmodes/Makefile
index eda8456f1c92..45717548b396 100644
--- a/drivers/usb/typec/altmodes/Makefile
+++ b/drivers/usb/typec/altmodes/Makefile
@@ -2,3 +2,5 @@
obj-$(CONFIG_TYPEC_DP_ALTMODE) += typec_displayport.o
typec_displayport-y := displayport.o
+obj-$(CONFIG_TYPEC_NVIDIA_ALTMODE) += typec_nvidia.o
+typec_nvidia-y := nvidia.o
diff --git a/drivers/usb/typec/altmodes/nvidia.c b/drivers/usb/typec/altmodes/nvidia.c
new file mode 100644
index 000000000000..c36769736405
--- /dev/null
+++ b/drivers/usb/typec/altmodes/nvidia.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 NVIDIA Corporation. All rights reserved.
+ *
+ * NVIDIA USB Type-C Alt Mode Driver
+ */
+#include <linux/module.h>
+#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
+#include "displayport.h"
+
+static int nvidia_altmode_probe(struct typec_altmode *alt)
+{
+ if (alt->svid == USB_TYPEC_NVIDIA_VLINK_SID)
+ return dp_altmode_probe(alt);
+ else
+ return -ENOTSUPP;
+}
+
+static void nvidia_altmode_remove(struct typec_altmode *alt)
+{
+ if (alt->svid == USB_TYPEC_NVIDIA_VLINK_SID)
+ dp_altmode_remove(alt);
+}
+
+static const struct typec_device_id nvidia_typec_id[] = {
+ { USB_TYPEC_NVIDIA_VLINK_SID, TYPEC_ANY_MODE },
+ { },
+};
+MODULE_DEVICE_TABLE(typec, nvidia_typec_id);
+
+static struct typec_altmode_driver nvidia_altmode_driver = {
+ .id_table = nvidia_typec_id,
+ .probe = nvidia_altmode_probe,
+ .remove = nvidia_altmode_remove,
+ .driver = {
+ .name = "typec_nvidia",
+ .owner = THIS_MODULE,
+ },
+};
+module_typec_altmode_driver(nvidia_altmode_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("NVIDIA USB Type-C Alt Mode Driver");
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 22fb956687de..999ae50d6e49 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -310,6 +310,7 @@ static int ucsi_register_altmode(struct ucsi_connector *con,
switch (desc->svid) {
case USB_TYPEC_DP_SID:
+ case USB_TYPEC_NVIDIA_VLINK_SID:
alt = ucsi_register_displayport(con, override, i, desc);
break;
default:
@@ -428,7 +429,8 @@ static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
while (adev[i]) {
if (recipient == UCSI_RECIPIENT_SOP &&
- adev[i]->svid == USB_TYPEC_DP_SID) {
+ (adev[i]->svid == USB_TYPEC_DP_SID ||
+ adev[i]->svid == USB_TYPEC_NVIDIA_VLINK_SID)) {
pdev = typec_altmode_get_partner(adev[i]);
ucsi_displayport_remove_partner((void *)pdev);
}
diff --git a/include/linux/usb/typec_dp.h b/include/linux/usb/typec_dp.h
index 7fa12ef8d09a..fc4c7edb2e8a 100644
--- a/include/linux/usb/typec_dp.h
+++ b/include/linux/usb/typec_dp.h
@@ -5,6 +5,11 @@
#include <linux/usb/typec_altmode.h>
#define USB_TYPEC_DP_SID 0xff01
+/* USB IF has not assigned a Standard ID (SID) for VirtualLink,
+ * so the manufacturers of VirtualLink adapters use their Vendor
+ * IDs as the SVID.
+ */
+#define USB_TYPEC_NVIDIA_VLINK_SID 0x955 /* NVIDIA VirtualLink */
#define USB_TYPEC_DP_MODE 1
/*
--
2.20.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* Re: [PATCH v2 7/7] usb: typec: Add driver for NVIDIA Alt Modes
2019-04-15 12:09 ` [v2,7/7] usb: typec: Add driver for NVIDIA Alt Modes Heikki Krogerus
2019-04-15 12:09 ` [PATCH v2 7/7] " Heikki Krogerus
@ 2019-04-15 21:12 ` kbuild test robot
2019-04-16 10:02 ` [v2,7/7] " Greg Kroah-Hartman
2 siblings, 0 replies; 28+ messages in thread
From: kbuild test robot @ 2019-04-15 21:12 UTC (permalink / raw)
To: Heikki Krogerus; +Cc: kbuild-all, Greg Kroah-Hartman, Ajay Gupta, linux-usb
[-- Attachment #1: Type: text/plain, Size: 1067 bytes --]
Hi Heikki,
I love your patch! Yet something to improve:
[auto build test ERROR on usb/usb-testing]
[also build test ERROR on v5.1-rc5 next-20190415]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Heikki-Krogerus/usb-typec-Remaining-changes-for-v5-2/20190416-034644
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing
config: x86_64-randconfig-u0-04160432 (attached as .config)
compiler: gcc-5 (Debian 5.5.0-3) 5.4.1 20171010
reproduce:
# save the attached .config to linux build tree
make ARCH=x86_64
All errors (new ones prefixed by >>):
>> drivers/usb/typec/altmodes/nvidia.c:10:25: fatal error: displayport.h: No such file or directory
compilation terminated.
vim +10 drivers/usb/typec/altmodes/nvidia.c
> 10 #include "displayport.h"
11
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 34635 bytes --]
^ permalink raw reply [flat|nested] 28+ messages in thread* [v2,7/7] usb: typec: Add driver for NVIDIA Alt Modes
@ 2019-04-16 10:02 ` Greg Kroah-Hartman
2019-04-16 10:02 ` [PATCH v2 7/7] " Greg Kroah-Hartman
0 siblings, 1 reply; 28+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-16 10:02 UTC (permalink / raw)
To: Heikki Krogerus; +Cc: Ajay Gupta, linux-usb
On Mon, Apr 15, 2019 at 03:09:31PM +0300, Heikki Krogerus wrote:
> From: Ajay Gupta <ajayg@nvidia.com>
>
> Latest NVIDIA GPUs support VirtualLink device. Since USBIF
> has not assigned a Standard ID (SID) for VirtualLink
> so using NVIDA VID 0x955 as SVID.
>
> Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> drivers/usb/typec/altmodes/Kconfig | 10 +++++++
> drivers/usb/typec/altmodes/Makefile | 2 ++
> drivers/usb/typec/altmodes/nvidia.c | 44 +++++++++++++++++++++++++++++
> drivers/usb/typec/ucsi/ucsi.c | 4 ++-
> include/linux/usb/typec_dp.h | 5 ++++
> 5 files changed, 64 insertions(+), 1 deletion(-)
> create mode 100644 drivers/usb/typec/altmodes/nvidia.c
kbuild does not like this, so I'm dropping it from my queue.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v2 7/7] usb: typec: Add driver for NVIDIA Alt Modes
2019-04-16 10:02 ` [v2,7/7] " Greg Kroah-Hartman
@ 2019-04-16 10:02 ` Greg Kroah-Hartman
0 siblings, 0 replies; 28+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-16 10:02 UTC (permalink / raw)
To: Heikki Krogerus; +Cc: Ajay Gupta, linux-usb
On Mon, Apr 15, 2019 at 03:09:31PM +0300, Heikki Krogerus wrote:
> From: Ajay Gupta <ajayg@nvidia.com>
>
> Latest NVIDIA GPUs support VirtualLink device. Since USBIF
> has not assigned a Standard ID (SID) for VirtualLink
> so using NVIDA VID 0x955 as SVID.
>
> Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> drivers/usb/typec/altmodes/Kconfig | 10 +++++++
> drivers/usb/typec/altmodes/Makefile | 2 ++
> drivers/usb/typec/altmodes/nvidia.c | 44 +++++++++++++++++++++++++++++
> drivers/usb/typec/ucsi/ucsi.c | 4 ++-
> include/linux/usb/typec_dp.h | 5 ++++
> 5 files changed, 64 insertions(+), 1 deletion(-)
> create mode 100644 drivers/usb/typec/altmodes/nvidia.c
kbuild does not like this, so I'm dropping it from my queue.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 28+ messages in thread