[PATCH AUTOSEL 4.19 018/244] usb: dwc2: gadget: Increase descriptors count for ISOC's

[PATCH AUTOSEL 4.19 018/244] usb: dwc2: gadget: Increase descriptors count for ISOC's

[Sasha Levin]

From: Minas Harutyunyan <minas.harutyunyan@synopsys.com>

[ Upstream commit 54f37f56631747075f1f9a2f0edf6ba405e3e66c ]

Some function drivers queueing more than 128 ISOC requests at a time.
To avoid "descriptor chain full" cases, increasing descriptors count
from MAX_DMA_DESC_NUM_GENERIC to MAX_DMA_DESC_NUM_HS_ISOC for ISOC's
only.

Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc2/gadget.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 220c0f9b89b0b..03614ef64ca47 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -675,13 +675,11 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
 	unsigned int maxsize;
 
 	if (is_isoc)
-		maxsize = hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT :
-					   DEV_DMA_ISOC_RX_NBYTES_LIMIT;
+		maxsize = (hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT :
+					   DEV_DMA_ISOC_RX_NBYTES_LIMIT) *
+					   MAX_DMA_DESC_NUM_HS_ISOC;
 	else
-		maxsize = DEV_DMA_NBYTES_LIMIT;
-
-	/* Above size of one descriptor was chosen, multiple it */
-	maxsize *= MAX_DMA_DESC_NUM_GENERIC;
+		maxsize = DEV_DMA_NBYTES_LIMIT * MAX_DMA_DESC_NUM_GENERIC;
 
 	return maxsize;
 }
@@ -864,7 +862,7 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep,
 
 	/* Update index of last configured entry in the chain */
 	hs_ep->next_desc++;
-	if (hs_ep->next_desc >= MAX_DMA_DESC_NUM_GENERIC)
+	if (hs_ep->next_desc >= MAX_DMA_DESC_NUM_HS_ISOC)
 		hs_ep->next_desc = 0;
 
 	return 0;
@@ -896,7 +894,7 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep)
 	}
 
 	/* Initialize descriptor chain by Host Busy status */
-	for (i = 0; i < MAX_DMA_DESC_NUM_GENERIC; i++) {
+	for (i = 0; i < MAX_DMA_DESC_NUM_HS_ISOC; i++) {
 		desc = &hs_ep->desc_list[i];
 		desc->status = 0;
 		desc->status |= (DEV_DMA_BUFF_STS_HBUSY
@@ -2083,7 +2081,7 @@ static void dwc2_gadget_complete_isoc_request_ddma(struct dwc2_hsotg_ep *hs_ep)
 		dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
 
 		hs_ep->compl_desc++;
-		if (hs_ep->compl_desc > (MAX_DMA_DESC_NUM_GENERIC - 1))
+		if (hs_ep->compl_desc > (MAX_DMA_DESC_NUM_HS_ISOC - 1))
 			hs_ep->compl_desc = 0;
 		desc_sts = hs_ep->desc_list[hs_ep->compl_desc].status;
 	}
@@ -3779,6 +3777,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 	unsigned int i, val, size;
 	int ret = 0;
 	unsigned char ep_type;
+	int desc_num;
 
 	dev_dbg(hsotg->dev,
 		"%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
@@ -3825,11 +3824,15 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
 		__func__, epctrl, epctrl_reg);
 
+	if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC)
+		desc_num = MAX_DMA_DESC_NUM_HS_ISOC;
+	else
+		desc_num = MAX_DMA_DESC_NUM_GENERIC;
+
 	/* Allocate DMA descriptor chain for non-ctrl endpoints */
 	if (using_desc_dma(hsotg) && !hs_ep->desc_list) {
 		hs_ep->desc_list = dmam_alloc_coherent(hsotg->dev,
-			MAX_DMA_DESC_NUM_GENERIC *
-			sizeof(struct dwc2_dma_desc),
+			desc_num * sizeof(struct dwc2_dma_desc),
 			&hs_ep->desc_list_dma, GFP_ATOMIC);
 		if (!hs_ep->desc_list) {
 			ret = -ENOMEM;
@@ -3971,7 +3974,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 
 error2:
 	if (ret && using_desc_dma(hsotg) && hs_ep->desc_list) {
-		dmam_free_coherent(hsotg->dev, MAX_DMA_DESC_NUM_GENERIC *
+		dmam_free_coherent(hsotg->dev, desc_num *
 			sizeof(struct dwc2_dma_desc),
 			hs_ep->desc_list, hs_ep->desc_list_dma);
 		hs_ep->desc_list = NULL;
-- 
2.20.1

[PATCH AUTOSEL 4.19 019/244] usb: dwc3: move synchronize_irq() out of the spinlock protected block

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 41a91c606e7d2b74358a944525267cc451c271e8 ]

dwc3_gadget_suspend() is called under dwc->lock spinlock. In such context
calling synchronize_irq() is not allowed. Move the problematic call out
of the protected block to fix the following kernel BUG during system
suspend:

BUG: sleeping function called from invalid context at kernel/irq/manage.c:112
in_atomic(): 1, irqs_disabled(): 128, pid: 1601, name: rtcwake
6 locks held by rtcwake/1601:
 #0: f70ac2a2 (sb_writers#7){.+.+}, at: vfs_write+0x130/0x16c
 #1: b5fe1270 (&of->mutex){+.+.}, at: kernfs_fop_write+0xc0/0x1e4
 #2: 7e597705 (kn->count#60){.+.+}, at: kernfs_fop_write+0xc8/0x1e4
 #3: 8b3527d0 (system_transition_mutex){+.+.}, at: pm_suspend+0xc4/0xc04
 #4: fc7f1c42 (&dev->mutex){....}, at: __device_suspend+0xd8/0x74c
 #5: 4b36507e (&(&dwc->lock)->rlock){....}, at: dwc3_gadget_suspend+0x24/0x3c
irq event stamp: 11252
hardirqs last  enabled at (11251): [<c09c54a4>] _raw_spin_unlock_irqrestore+0x6c/0x74
hardirqs last disabled at (11252): [<c09c4d44>] _raw_spin_lock_irqsave+0x1c/0x5c
softirqs last  enabled at (9744): [<c0102564>] __do_softirq+0x3a4/0x66c
softirqs last disabled at (9737): [<c0128528>] irq_exit+0x140/0x168
Preemption disabled at:
[<00000000>]   (null)
CPU: 7 PID: 1601 Comm: rtcwake Not tainted
5.0.0-rc3-next-20190122-00039-ga3f4ee4f8a52 #5252
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c01110f0>] (unwind_backtrace) from [<c010d120>] (show_stack+0x10/0x14)
[<c010d120>] (show_stack) from [<c09a4d04>] (dump_stack+0x90/0xc8)
[<c09a4d04>] (dump_stack) from [<c014c700>] (___might_sleep+0x22c/0x2c8)
[<c014c700>] (___might_sleep) from [<c0189d68>] (synchronize_irq+0x28/0x84)
[<c0189d68>] (synchronize_irq) from [<c05cbbf8>] (dwc3_gadget_suspend+0x34/0x3c)
[<c05cbbf8>] (dwc3_gadget_suspend) from [<c05bd020>] (dwc3_suspend_common+0x154/0x410)
[<c05bd020>] (dwc3_suspend_common) from [<c05bd34c>] (dwc3_suspend+0x14/0x2c)
[<c05bd34c>] (dwc3_suspend) from [<c051c730>] (platform_pm_suspend+0x2c/0x54)
[<c051c730>] (platform_pm_suspend) from [<c05285d4>] (dpm_run_callback+0xa4/0x3dc)
[<c05285d4>] (dpm_run_callback) from [<c0528a40>] (__device_suspend+0x134/0x74c)
[<c0528a40>] (__device_suspend) from [<c052c508>] (dpm_suspend+0x174/0x588)
[<c052c508>] (dpm_suspend) from [<c0182134>] (suspend_devices_and_enter+0xc0/0xe74)
[<c0182134>] (suspend_devices_and_enter) from [<c0183658>] (pm_suspend+0x770/0xc04)
[<c0183658>] (pm_suspend) from [<c0180ddc>] (state_store+0x6c/0xcc)
[<c0180ddc>] (state_store) from [<c09a9a70>] (kobj_attr_store+0x14/0x20)
[<c09a9a70>] (kobj_attr_store) from [<c02d6800>] (sysfs_kf_write+0x4c/0x50)
[<c02d6800>] (sysfs_kf_write) from [<c02d594c>] (kernfs_fop_write+0xfc/0x1e4)
[<c02d594c>] (kernfs_fop_write) from [<c02593d8>] (__vfs_write+0x2c/0x160)
[<c02593d8>] (__vfs_write) from [<c0259694>] (vfs_write+0xa4/0x16c)
[<c0259694>] (vfs_write) from [<c0259870>] (ksys_write+0x40/0x8c)
[<c0259870>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xed55ffa8 to 0xed55fff0)
...

Fixes: 01c10880d242 ("usb: dwc3: gadget: synchronize_irq dwc irq in suspend")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/core.c   | 2 ++
 drivers/usb/dwc3/gadget.c | 2 --
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 4d5c7dda8f54d..05b9ccff7447a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1591,6 +1591,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 		spin_lock_irqsave(&dwc->lock, flags);
 		dwc3_gadget_suspend(dwc);
 		spin_unlock_irqrestore(&dwc->lock, flags);
+		synchronize_irq(dwc->irq_gadget);
 		dwc3_core_exit(dwc);
 		break;
 	case DWC3_GCTL_PRTCAP_HOST:
@@ -1623,6 +1624,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 			spin_lock_irqsave(&dwc->lock, flags);
 			dwc3_gadget_suspend(dwc);
 			spin_unlock_irqrestore(&dwc->lock, flags);
+			synchronize_irq(dwc->irq_gadget);
 		}
 
 		dwc3_otg_exit(dwc);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 524104eed8a71..65ba1038b1111 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3277,8 +3277,6 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
 	dwc3_disconnect_gadget(dwc);
 	__dwc3_gadget_stop(dwc);
 
-	synchronize_irq(dwc->irq_gadget);
-
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 053/244] USB: serial: fix initial-termios handling

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 579bebe5dd522580019e7b10b07daaf500f9fb1e ]

The USB-serial driver init_termios callback is used to override the
default initial terminal settings provided by USB-serial core.

After a bug was fixed in the original implementation introduced by
commit fe1ae7fdd2ee ("tty: USB serial termios bits"), the init_termios
callback was no longer called just once on first use as intended but
rather on every (first) open.

This specifically meant that the terminal settings saved on (final)
close were ignored when reopening a port for drivers overriding the
initial settings.

Also update the outdated function header referring to the creation of
termios objects.

Fixes: 7e29bb4b779f ("usb-serial: fix termios initialization logic")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/serial/usb-serial.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index f7aaa7f079e1a..c709b6281df65 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -164,9 +164,9 @@ void usb_serial_put(struct usb_serial *serial)
  * @driver: the driver (USB in our case)
  * @tty: the tty being created
  *
- * Create the termios objects for this tty.  We use the default
+ * Initialise the termios structure for this tty.  We use the default
  * USB serial settings but permit them to be overridden by
- * serial->type->init_termios.
+ * serial->type->init_termios on first open.
  *
  * This is the first place a new tty gets used.  Hence this is where we
  * acquire references to the usb_serial structure and the driver module,
@@ -178,6 +178,7 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 	int idx = tty->index;
 	struct usb_serial *serial;
 	struct usb_serial_port *port;
+	bool init_termios;
 	int retval = -ENODEV;
 
 	port = usb_serial_port_get_by_minor(idx);
@@ -192,14 +193,16 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 	if (retval)
 		goto error_get_interface;
 
+	init_termios = (driver->termios[idx] == NULL);
+
 	retval = tty_standard_install(driver, tty);
 	if (retval)
 		goto error_init_termios;
 
 	mutex_unlock(&serial->disc_mutex);
 
-	/* allow the driver to update the settings */
-	if (serial->type->init_termios)
+	/* allow the driver to update the initial settings */
+	if (init_termios && serial->type->init_termios)
 		serial->type->init_termios(tty);
 
 	tty->driver_data = port;
-- 
2.20.1