[PATCH AUTOSEL 4.19 21/45] lan78xx: Fix memory leaks

[PATCH AUTOSEL 4.19 21/45] lan78xx: Fix memory leaks

[Sasha Levin]

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit b9cbf8a64865b50fd0f4a3915fa00ac7365cdf8f ]

In lan78xx_probe(), a new urb is allocated through usb_alloc_urb() and
saved to 'dev->urb_intr'. However, in the following execution, if an error
occurs, 'dev->urb_intr' is not deallocated, leading to memory leaks. To fix
this issue, invoke usb_free_urb() to free the allocated urb before
returning from the function.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/lan78xx.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 8d140495da79d..e20266bd209e2 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -3799,7 +3799,7 @@ static int lan78xx_probe(struct usb_interface *intf,
 	ret = register_netdev(netdev);
 	if (ret != 0) {
 		netif_err(dev, probe, netdev, "couldn't register the device\n");
-		goto out3;
+		goto out4;
 	}
 
 	usb_set_intfdata(intf, dev);
@@ -3814,12 +3814,14 @@ static int lan78xx_probe(struct usb_interface *intf,
 
 	ret = lan78xx_phy_init(dev);
 	if (ret < 0)
-		goto out4;
+		goto out5;
 
 	return 0;
 
-out4:
+out5:
 	unregister_netdev(netdev);
+out4:
+	usb_free_urb(dev->urb_intr);
 out3:
 	lan78xx_unbind(dev, intf);
 out2:
-- 
2.20.1

[PATCH AUTOSEL 4.19 23/45] cx82310_eth: fix a memory leak bug

[Sasha Levin]

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit 1eca92eef18719027d394bf1a2d276f43e7cf886 ]

In cx82310_bind(), 'dev->partial_data' is allocated through kmalloc().
Then, the execution waits for the firmware to become ready. If the firmware
is not ready in time, the execution is terminated. However, the allocated
'dev->partial_data' is not deallocated on this path, leading to a memory
leak bug. To fix this issue, free 'dev->partial_data' before returning the
error.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/cx82310_eth.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/cx82310_eth.c b/drivers/net/usb/cx82310_eth.c
index 947bea81d9241..dfbdea22fbad9 100644
--- a/drivers/net/usb/cx82310_eth.c
+++ b/drivers/net/usb/cx82310_eth.c
@@ -175,7 +175,8 @@ static int cx82310_bind(struct usbnet *dev, struct usb_interface *intf)
 	}
 	if (!timeout) {
 		dev_err(&udev->dev, "firmware not ready in time\n");
-		return -ETIMEDOUT;
+		ret = -ETIMEDOUT;
+		goto err;
 	}
 
 	/* enable ethernet mode (?) */
-- 
2.20.1

[PATCH AUTOSEL 4.19 24/45] net: kalmia: fix memory leaks

[Sasha Levin]

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit f1472cb09f11ddb41d4be84f0650835cb65a9073 ]

In kalmia_init_and_get_ethernet_addr(), 'usb_buf' is allocated through
kmalloc(). In the following execution, if the 'status' returned by
kalmia_send_init_packet() is not 0, 'usb_buf' is not deallocated, leading
to memory leaks. To fix this issue, add the 'out' label to free 'usb_buf'.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/kalmia.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c
index bd2ba36590288..0cc6993c279a2 100644
--- a/drivers/net/usb/kalmia.c
+++ b/drivers/net/usb/kalmia.c
@@ -117,16 +117,16 @@ kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr)
 	status = kalmia_send_init_packet(dev, usb_buf, ARRAY_SIZE(init_msg_1),
 					 usb_buf, 24);
 	if (status != 0)
-		return status;
+		goto out;
 
 	memcpy(usb_buf, init_msg_2, 12);
 	status = kalmia_send_init_packet(dev, usb_buf, ARRAY_SIZE(init_msg_2),
 					 usb_buf, 28);
 	if (status != 0)
-		return status;
+		goto out;
 
 	memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN);
-
+out:
 	kfree(usb_buf);
 	return status;
 }
-- 
2.20.1