linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-omap@vger.kernel.org, Merlijn Wajer <merlijn@wizzup.org>,
	Pavel Machek <pavel@ucw.cz>, Sebastian Reichel <sre@kernel.org>
Subject: [PATCH 1/3] phy: cpcap-usb: Prevent USB line glitches from waking up modem
Date: Sun, 22 Dec 2019 10:17:02 -0800	[thread overview]
Message-ID: <20191222181704.61511-1-tony@atomide.com> (raw)

The micro-USB connector on Motorola Mapphone devices can be muxed between
the SoC and the mdm6600 modem. But even when used for the SoC, configuring
the PHY with ID pin grounded will wake up the modem from idle state. Looks
like the issue is probably caused by line glitches.

We can prevent the glitches by using a previously unknown mode of the
GPIO mux to prevent the USB lines from being connected to the moden while
configuring the USB PHY, and enable the USB lines after configuring the
PHY.

Note that this only prevents waking up mdm6600 as regular USB A-host mode,
and does not help when connected to a lapdock. The lapdock specific issue
still needs to be debugged separately.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/phy/motorola/phy-cpcap-usb.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/motorola/phy-cpcap-usb.c b/drivers/phy/motorola/phy-cpcap-usb.c
--- a/drivers/phy/motorola/phy-cpcap-usb.c
+++ b/drivers/phy/motorola/phy-cpcap-usb.c
@@ -115,7 +115,7 @@ struct cpcap_usb_ints_state {
 enum cpcap_gpio_mode {
 	CPCAP_DM_DP,
 	CPCAP_MDM_RX_TX,
-	CPCAP_UNKNOWN,
+	CPCAP_UNKNOWN_DISABLED,	/* Seems to disable USB lines */
 	CPCAP_OTG_DM_DP,
 };
 
@@ -381,7 +381,8 @@ static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata)
 {
 	int error;
 
-	error = cpcap_usb_gpio_set_mode(ddata, CPCAP_DM_DP);
+	/* Disable lines to prevent glitches from waking up mdm6600 */
+	error = cpcap_usb_gpio_set_mode(ddata, CPCAP_UNKNOWN_DISABLED);
 	if (error)
 		goto out_err;
 
@@ -408,6 +409,11 @@ static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata)
 	if (error)
 		goto out_err;
 
+	/* Enable UART mode */
+	error = cpcap_usb_gpio_set_mode(ddata, CPCAP_DM_DP);
+	if (error)
+		goto out_err;
+
 	return 0;
 
 out_err:
@@ -420,7 +426,8 @@ static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata)
 {
 	int error;
 
-	error = cpcap_usb_gpio_set_mode(ddata, CPCAP_OTG_DM_DP);
+	/* Disable lines to prevent glitches from waking up mdm6600 */
+	error = cpcap_usb_gpio_set_mode(ddata, CPCAP_UNKNOWN_DISABLED);
 	if (error)
 		return error;
 
@@ -460,6 +467,11 @@ static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata)
 	if (error)
 		goto out_err;
 
+	/* Enable USB mode */
+	error = cpcap_usb_gpio_set_mode(ddata, CPCAP_OTG_DM_DP);
+	if (error)
+		goto out_err;
+
 	return 0;
 
 out_err:
-- 
2.24.1

             reply	other threads:[~2019-12-22 18:17 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-22 18:17 Tony Lindgren [this message]
2019-12-22 18:17 ` [PATCH 2/3] phy: cpcap-usb: Improve host vs docked mode detection Tony Lindgren
2019-12-22 18:17 ` [PATCH 3/3] phy: cpcap-usb: Drop extra write to usb2 register Tony Lindgren
2019-12-26 10:47 ` [PATCH 1/3] phy: cpcap-usb: Prevent USB line glitches from waking up modem Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191222181704.61511-1-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=merlijn@wizzup.org \
    --cc=pavel@ucw.cz \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).