[PATCH v4 08/20] usb: phy: tegra: Use relaxed versions of readl/writel

linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

From: Dmitry Osipenko <digetx@gmail.com>
To: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Peter Chen" <Peter.Chen@nxp.com>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Jonathan Hunter" <jonathanh@nvidia.com>,
	"Felipe Balbi" <balbi@kernel.org>,
	"Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: linux-usb@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 08/20] usb: phy: tegra: Use relaxed versions of readl/writel
Date: Mon,  6 Jan 2020 04:34:04 +0300	[thread overview]
Message-ID: <20200106013416.9604-9-digetx@gmail.com> (raw)
In-Reply-To: <20200106013416.9604-1-digetx@gmail.com>

There is nothing to synchronize in regards to memory stores, thus all
readl/writel occurrences in the code could be replaced with a relaxed
versions, for consistency.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/usb/phy/phy-tegra-usb.c | 195 ++++++++++++++++----------------
 1 file changed, 98 insertions(+), 97 deletions(-)

diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index aca1413db0ed..268b9d9ce57e 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -207,15 +207,16 @@ static void set_pts(struct tegra_usb_phy *phy, u8 pts_val)
 	unsigned long val;
 
 	if (phy->soc_config->has_hostpc) {
-		val = readl(base + TEGRA_USB_HOSTPC1_DEVLC);
+		val = readl_relaxed(base + TEGRA_USB_HOSTPC1_DEVLC);
 		val &= ~TEGRA_USB_HOSTPC1_DEVLC_PTS(~0);
 		val |= TEGRA_USB_HOSTPC1_DEVLC_PTS(pts_val);
-		writel(val, base + TEGRA_USB_HOSTPC1_DEVLC);
+		writel_relaxed(val, base + TEGRA_USB_HOSTPC1_DEVLC);
 	} else {
-		val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
+		val = readl_relaxed(base + TEGRA_USB_PORTSC1);
+		val &= ~TEGRA_PORTSC1_RWC_BITS;
 		val &= ~TEGRA_USB_PORTSC1_PTS(~0);
 		val |= TEGRA_USB_PORTSC1_PTS(pts_val);
-		writel(val, base + TEGRA_USB_PORTSC1);
+		writel_relaxed(val, base + TEGRA_USB_PORTSC1);
 	}
 }
 
@@ -225,19 +226,19 @@ static void set_phcd(struct tegra_usb_phy *phy, bool enable)
 	unsigned long val;
 
 	if (phy->soc_config->has_hostpc) {
-		val = readl(base + TEGRA_USB_HOSTPC1_DEVLC);
+		val = readl_relaxed(base + TEGRA_USB_HOSTPC1_DEVLC);
 		if (enable)
 			val |= TEGRA_USB_HOSTPC1_DEVLC_PHCD;
 		else
 			val &= ~TEGRA_USB_HOSTPC1_DEVLC_PHCD;
-		writel(val, base + TEGRA_USB_HOSTPC1_DEVLC);
+		writel_relaxed(val, base + TEGRA_USB_HOSTPC1_DEVLC);
 	} else {
-		val = readl(base + TEGRA_USB_PORTSC1) & ~PORT_RWC_BITS;
+		val = readl_relaxed(base + TEGRA_USB_PORTSC1) & ~PORT_RWC_BITS;
 		if (enable)
 			val |= TEGRA_USB_PORTSC1_PHCD;
 		else
 			val &= ~TEGRA_USB_PORTSC1_PHCD;
-		writel(val, base + TEGRA_USB_PORTSC1);
+		writel_relaxed(val, base + TEGRA_USB_PORTSC1);
 	}
 }
 
@@ -319,7 +320,7 @@ static int utmip_pad_power_on(struct tegra_usb_phy *phy)
 	spin_lock_irqsave(&utmip_pad_lock, flags);
 
 	if (utmip_pad_count++ == 0) {
-		val = readl(base + UTMIP_BIAS_CFG0);
+		val = readl_relaxed(base + UTMIP_BIAS_CFG0);
 		val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
 
 		if (phy->soc_config->requires_extra_tuning_parameters) {
@@ -331,7 +332,7 @@ static int utmip_pad_power_on(struct tegra_usb_phy *phy)
 			val |= UTMIP_HSDISCON_LEVEL(config->hsdiscon_level);
 			val |= UTMIP_HSDISCON_LEVEL_MSB(config->hsdiscon_level);
 		}
-		writel(val, base + UTMIP_BIAS_CFG0);
+		writel_relaxed(val, base + UTMIP_BIAS_CFG0);
 	}
 
 	spin_unlock_irqrestore(&utmip_pad_lock, flags);
@@ -359,9 +360,9 @@ static int utmip_pad_power_off(struct tegra_usb_phy *phy)
 	spin_lock_irqsave(&utmip_pad_lock, flags);
 
 	if (--utmip_pad_count == 0) {
-		val = readl(base + UTMIP_BIAS_CFG0);
+		val = readl_relaxed(base + UTMIP_BIAS_CFG0);
 		val |= UTMIP_OTGPD | UTMIP_BIASPD;
-		writel(val, base + UTMIP_BIAS_CFG0);
+		writel_relaxed(val, base + UTMIP_BIAS_CFG0);
 	}
 
 	spin_unlock_irqrestore(&utmip_pad_lock, flags);
@@ -375,8 +376,8 @@ static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
 {
 	u32 tmp;
 
-	return readl_poll_timeout(reg, tmp, (tmp & mask) == result,
-				  2000, 6000);
+	return readl_relaxed_poll_timeout(reg, tmp, (tmp & mask) == result,
+					  2000, 6000);
 }
 
 static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
@@ -393,15 +394,15 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
 		return;
 
 	if (phy->is_legacy_phy) {
-		val = readl(base + USB_SUSP_CTRL);
+		val = readl_relaxed(base + USB_SUSP_CTRL);
 		val |= USB_SUSP_SET;
-		writel(val, base + USB_SUSP_CTRL);
+		writel_relaxed(val, base + USB_SUSP_CTRL);
 
 		usleep_range(10, 100);
 
-		val = readl(base + USB_SUSP_CTRL);
+		val = readl_relaxed(base + USB_SUSP_CTRL);
 		val &= ~USB_SUSP_SET;
-		writel(val, base + USB_SUSP_CTRL);
+		writel_relaxed(val, base + USB_SUSP_CTRL);
 	} else {
 		set_phcd(phy, true);
 	}
@@ -426,15 +427,15 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
 		return;
 
 	if (phy->is_legacy_phy) {
-		val = readl(base + USB_SUSP_CTRL);
+		val = readl_relaxed(base + USB_SUSP_CTRL);
 		val |= USB_SUSP_CLR;
-		writel(val, base + USB_SUSP_CTRL);
+		writel_relaxed(val, base + USB_SUSP_CTRL);
 
 		usleep_range(10, 100);
 
-		val = readl(base + USB_SUSP_CTRL);
+		val = readl_relaxed(base + USB_SUSP_CTRL);
 		val &= ~USB_SUSP_CLR;
-		writel(val, base + USB_SUSP_CTRL);
+		writel_relaxed(val, base + USB_SUSP_CTRL);
 	} else {
 		set_phcd(phy, false);
 	}
@@ -452,75 +453,75 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 	unsigned long val;
 	int err;
 
-	val = readl(base + USB_SUSP_CTRL);
+	val = readl_relaxed(base + USB_SUSP_CTRL);
 	val |= UTMIP_RESET;
-	writel(val, base + USB_SUSP_CTRL);
+	writel_relaxed(val, base + USB_SUSP_CTRL);
 
 	if (phy->is_legacy_phy) {
-		val = readl(base + USB1_LEGACY_CTRL);
+		val = readl_relaxed(base + USB1_LEGACY_CTRL);
 		val |= USB1_NO_LEGACY_MODE;
-		writel(val, base + USB1_LEGACY_CTRL);
+		writel_relaxed(val, base + USB1_LEGACY_CTRL);
 	}
 
-	val = readl(base + UTMIP_TX_CFG0);
+	val = readl_relaxed(base + UTMIP_TX_CFG0);
 	val |= UTMIP_FS_PREABMLE_J;
-	writel(val, base + UTMIP_TX_CFG0);
+	writel_relaxed(val, base + UTMIP_TX_CFG0);
 
-	val = readl(base + UTMIP_HSRX_CFG0);
+	val = readl_relaxed(base + UTMIP_HSRX_CFG0);
 	val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0));
 	val |= UTMIP_IDLE_WAIT(config->idle_wait_delay);
 	val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit);
-	writel(val, base + UTMIP_HSRX_CFG0);
+	writel_relaxed(val, base + UTMIP_HSRX_CFG0);
 
-	val = readl(base + UTMIP_HSRX_CFG1);
+	val = readl_relaxed(base + UTMIP_HSRX_CFG1);
 	val &= ~UTMIP_HS_SYNC_START_DLY(~0);
 	val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay);
-	writel(val, base + UTMIP_HSRX_CFG1);
+	writel_relaxed(val, base + UTMIP_HSRX_CFG1);
 
-	val = readl(base + UTMIP_DEBOUNCE_CFG0);
+	val = readl_relaxed(base + UTMIP_DEBOUNCE_CFG0);
 	val &= ~UTMIP_BIAS_DEBOUNCE_A(~0);
 	val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce);
-	writel(val, base + UTMIP_DEBOUNCE_CFG0);
+	writel_relaxed(val, base + UTMIP_DEBOUNCE_CFG0);
 
-	val = readl(base + UTMIP_MISC_CFG0);
+	val = readl_relaxed(base + UTMIP_MISC_CFG0);
 	val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
-	writel(val, base + UTMIP_MISC_CFG0);
+	writel_relaxed(val, base + UTMIP_MISC_CFG0);
 
 	if (!phy->soc_config->utmi_pll_config_in_car_module) {
-		val = readl(base + UTMIP_MISC_CFG1);
+		val = readl_relaxed(base + UTMIP_MISC_CFG1);
 		val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) |
 			UTMIP_PLLU_STABLE_COUNT(~0));
 		val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
 			UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
-		writel(val, base + UTMIP_MISC_CFG1);
+		writel_relaxed(val, base + UTMIP_MISC_CFG1);
 
-		val = readl(base + UTMIP_PLL_CFG1);
+		val = readl_relaxed(base + UTMIP_PLL_CFG1);
 		val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) |
 			UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
 		val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
 			UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
-		writel(val, base + UTMIP_PLL_CFG1);
+		writel_relaxed(val, base + UTMIP_PLL_CFG1);
 	}
 
 	if (phy->mode == USB_DR_MODE_PERIPHERAL) {
-		val = readl(base + USB_SUSP_CTRL);
+		val = readl_relaxed(base + USB_SUSP_CTRL);
 		val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
-		writel(val, base + USB_SUSP_CTRL);
+		writel_relaxed(val, base + USB_SUSP_CTRL);
 
-		val = readl(base + UTMIP_BAT_CHRG_CFG0);
+		val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
 		val &= ~UTMIP_PD_CHRG;
-		writel(val, base + UTMIP_BAT_CHRG_CFG0);
+		writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0);
 	} else {
-		val = readl(base + UTMIP_BAT_CHRG_CFG0);
+		val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
 		val |= UTMIP_PD_CHRG;
-		writel(val, base + UTMIP_BAT_CHRG_CFG0);
+		writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0);
 	}
 
 	err = utmip_pad_power_on(phy);
 	if (err)
 		return err;
 
-	val = readl(base + UTMIP_XCVR_CFG0);
+	val = readl_relaxed(base + UTMIP_XCVR_CFG0);
 	val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
 		 UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_LSBIAS_SEL |
 		 UTMIP_XCVR_SETUP(~0) | UTMIP_XCVR_SETUP_MSB(~0) |
@@ -538,57 +539,57 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 		val |= UTMIP_XCVR_HSSLEW(config->xcvr_hsslew);
 		val |= UTMIP_XCVR_HSSLEW_MSB(config->xcvr_hsslew);
 	}
-	writel(val, base + UTMIP_XCVR_CFG0);
+	writel_relaxed(val, base + UTMIP_XCVR_CFG0);
 
-	val = readl(base + UTMIP_XCVR_CFG1);
+	val = readl_relaxed(base + UTMIP_XCVR_CFG1);
 	val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
 		 UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0));
 	val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
-	writel(val, base + UTMIP_XCVR_CFG1);
+	writel_relaxed(val, base + UTMIP_XCVR_CFG1);
 
-	val = readl(base + UTMIP_BIAS_CFG1);
+	val = readl_relaxed(base + UTMIP_BIAS_CFG1);
 	val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
 	val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
-	writel(val, base + UTMIP_BIAS_CFG1);
+	writel_relaxed(val, base + UTMIP_BIAS_CFG1);
 
-	val = readl(base + UTMIP_SPARE_CFG0);
+	val = readl_relaxed(base + UTMIP_SPARE_CFG0);
 	if (config->xcvr_setup_use_fuses)
 		val |= FUSE_SETUP_SEL;
 	else
 		val &= ~FUSE_SETUP_SEL;
-	writel(val, base + UTMIP_SPARE_CFG0);
+	writel_relaxed(val, base + UTMIP_SPARE_CFG0);
 
 	if (!phy->is_legacy_phy) {
-		val = readl(base + USB_SUSP_CTRL);
+		val = readl_relaxed(base + USB_SUSP_CTRL);
 		val |= UTMIP_PHY_ENABLE;
-		writel(val, base + USB_SUSP_CTRL);
+		writel_relaxed(val, base + USB_SUSP_CTRL);
 	}
 
-	val = readl(base + USB_SUSP_CTRL);
+	val = readl_relaxed(base + USB_SUSP_CTRL);
 	val &= ~UTMIP_RESET;
-	writel(val, base + USB_SUSP_CTRL);
+	writel_relaxed(val, base + USB_SUSP_CTRL);
 
 	if (phy->is_legacy_phy) {
-		val = readl(base + USB1_LEGACY_CTRL);
+		val = readl_relaxed(base + USB1_LEGACY_CTRL);
 		val &= ~USB1_VBUS_SENSE_CTL_MASK;
 		val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD;
-		writel(val, base + USB1_LEGACY_CTRL);
+		writel_relaxed(val, base + USB1_LEGACY_CTRL);
 
-		val = readl(base + USB_SUSP_CTRL);
+		val = readl_relaxed(base + USB_SUSP_CTRL);
 		val &= ~USB_SUSP_SET;
-		writel(val, base + USB_SUSP_CTRL);
+		writel_relaxed(val, base + USB_SUSP_CTRL);
 	}
 
 	utmi_phy_clk_enable(phy);
 
 	if (phy->soc_config->requires_usbmode_setup) {
-		val = readl(base + USB_USBMODE);
+		val = readl_relaxed(base + USB_USBMODE);
 		val &= ~USB_USBMODE_MASK;
 		if (phy->mode == USB_DR_MODE_HOST)
 			val |= USB_USBMODE_HOST;
 		else
 			val |= USB_USBMODE_DEVICE;
-		writel(val, base + USB_USBMODE);
+		writel_relaxed(val, base + USB_USBMODE);
 	}
 
 	if (!phy->is_legacy_phy)
@@ -605,29 +606,29 @@ static int utmi_phy_power_off(struct tegra_usb_phy *phy)
 	utmi_phy_clk_disable(phy);
 
 	if (phy->mode == USB_DR_MODE_PERIPHERAL) {
-		val = readl(base + USB_SUSP_CTRL);
+		val = readl_relaxed(base + USB_SUSP_CTRL);
 		val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
 		val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5);
-		writel(val, base + USB_SUSP_CTRL);
+		writel_relaxed(val, base + USB_SUSP_CTRL);
 	}
 
-	val = readl(base + USB_SUSP_CTRL);
+	val = readl_relaxed(base + USB_SUSP_CTRL);
 	val |= UTMIP_RESET;
-	writel(val, base + USB_SUSP_CTRL);
+	writel_relaxed(val, base + USB_SUSP_CTRL);
 
-	val = readl(base + UTMIP_BAT_CHRG_CFG0);
+	val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
 	val |= UTMIP_PD_CHRG;
-	writel(val, base + UTMIP_BAT_CHRG_CFG0);
+	writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0);
 
-	val = readl(base + UTMIP_XCVR_CFG0);
+	val = readl_relaxed(base + UTMIP_XCVR_CFG0);
 	val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
 	       UTMIP_FORCE_PDZI_POWERDOWN;
-	writel(val, base + UTMIP_XCVR_CFG0);
+	writel_relaxed(val, base + UTMIP_XCVR_CFG0);
 
-	val = readl(base + UTMIP_XCVR_CFG1);
+	val = readl_relaxed(base + UTMIP_XCVR_CFG1);
 	val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
 	       UTMIP_FORCE_PDDR_POWERDOWN;
-	writel(val, base + UTMIP_XCVR_CFG1);
+	writel_relaxed(val, base + UTMIP_XCVR_CFG1);
 
 	return utmip_pad_power_off(phy);
 }
@@ -637,9 +638,9 @@ static void utmi_phy_preresume(struct tegra_usb_phy *phy)
 	void __iomem *base = phy->regs;
 	unsigned long val;
 
-	val = readl(base + UTMIP_TX_CFG0);
+	val = readl_relaxed(base + UTMIP_TX_CFG0);
 	val |= UTMIP_HS_DISCON_DISABLE;
-	writel(val, base + UTMIP_TX_CFG0);
+	writel_relaxed(val, base + UTMIP_TX_CFG0);
 }
 
 static void utmi_phy_postresume(struct tegra_usb_phy *phy)
@@ -647,9 +648,9 @@ static void utmi_phy_postresume(struct tegra_usb_phy *phy)
 	void __iomem *base = phy->regs;
 	unsigned long val;
 
-	val = readl(base + UTMIP_TX_CFG0);
+	val = readl_relaxed(base + UTMIP_TX_CFG0);
 	val &= ~UTMIP_HS_DISCON_DISABLE;
-	writel(val, base + UTMIP_TX_CFG0);
+	writel_relaxed(val, base + UTMIP_TX_CFG0);
 }
 
 static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
@@ -658,18 +659,18 @@ static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
 	void __iomem *base = phy->regs;
 	unsigned long val;
 
-	val = readl(base + UTMIP_MISC_CFG0);
+	val = readl_relaxed(base + UTMIP_MISC_CFG0);
 	val &= ~UTMIP_DPDM_OBSERVE_SEL(~0);
 	if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
 		val |= UTMIP_DPDM_OBSERVE_SEL_FS_K;
 	else
 		val |= UTMIP_DPDM_OBSERVE_SEL_FS_J;
-	writel(val, base + UTMIP_MISC_CFG0);
+	writel_relaxed(val, base + UTMIP_MISC_CFG0);
 	usleep_range(1, 10);
 
-	val = readl(base + UTMIP_MISC_CFG0);
+	val = readl_relaxed(base + UTMIP_MISC_CFG0);
 	val |= UTMIP_DPDM_OBSERVE;
-	writel(val, base + UTMIP_MISC_CFG0);
+	writel_relaxed(val, base + UTMIP_MISC_CFG0);
 	usleep_range(10, 100);
 }
 
@@ -678,9 +679,9 @@ static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
 	void __iomem *base = phy->regs;
 	unsigned long val;
 
-	val = readl(base + UTMIP_MISC_CFG0);
+	val = readl_relaxed(base + UTMIP_MISC_CFG0);
 	val &= ~UTMIP_DPDM_OBSERVE;
-	writel(val, base + UTMIP_MISC_CFG0);
+	writel_relaxed(val, base + UTMIP_MISC_CFG0);
 	usleep_range(10, 100);
 }
 
@@ -712,31 +713,31 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
 
 	usleep_range(1000, 2000);
 
-	val = readl(base + USB_SUSP_CTRL);
+	val = readl_relaxed(base + USB_SUSP_CTRL);
 	val |= UHSIC_RESET;
-	writel(val, base + USB_SUSP_CTRL);
+	writel_relaxed(val, base + USB_SUSP_CTRL);
 
-	val = readl(base + ULPI_TIMING_CTRL_0);
+	val = readl_relaxed(base + ULPI_TIMING_CTRL_0);
 	val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP;
-	writel(val, base + ULPI_TIMING_CTRL_0);
+	writel_relaxed(val, base + ULPI_TIMING_CTRL_0);
 
-	val = readl(base + USB_SUSP_CTRL);
+	val = readl_relaxed(base + USB_SUSP_CTRL);
 	val |= ULPI_PHY_ENABLE;
-	writel(val, base + USB_SUSP_CTRL);
+	writel_relaxed(val, base + USB_SUSP_CTRL);
 
 	val = 0;
-	writel(val, base + ULPI_TIMING_CTRL_1);
+	writel_relaxed(val, base + ULPI_TIMING_CTRL_1);
 
 	val |= ULPI_DATA_TRIMMER_SEL(4);
 	val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
 	val |= ULPI_DIR_TRIMMER_SEL(4);
-	writel(val, base + ULPI_TIMING_CTRL_1);
+	writel_relaxed(val, base + ULPI_TIMING_CTRL_1);
 	usleep_range(10, 100);
 
 	val |= ULPI_DATA_TRIMMER_LOAD;
 	val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
 	val |= ULPI_DIR_TRIMMER_LOAD;
-	writel(val, base + ULPI_TIMING_CTRL_1);
+	writel_relaxed(val, base + ULPI_TIMING_CTRL_1);
 
 	/* Fix VbusInvalid due to floating VBUS */
 	err = usb_phy_io_write(phy->ulpi, 0x40, 0x08);
@@ -751,14 +752,14 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
 		goto disable_clk;
 	}
 
-	val = readl(base + USB_SUSP_CTRL);
+	val = readl_relaxed(base + USB_SUSP_CTRL);
 	val |= USB_SUSP_CLR;
-	writel(val, base + USB_SUSP_CTRL);
+	writel_relaxed(val, base + USB_SUSP_CTRL);
 	usleep_range(100, 1000);
 
-	val = readl(base + USB_SUSP_CTRL);
+	val = readl_relaxed(base + USB_SUSP_CTRL);
 	val &= ~USB_SUSP_CLR;
-	writel(val, base + USB_SUSP_CTRL);
+	writel_relaxed(val, base + USB_SUSP_CTRL);
 
 	return 0;
 
-- 
2.24.0

next prev parent reply	other threads:[~2020-01-06  1:35 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-06  1:33 [PATCH v4 00/20] NVIDIA Tegra USB2 drivers clean up Dmitry Osipenko
2020-01-06  1:33 ` [PATCH v4 01/20] dt-binding: usb: ci-hdrc-usb2: Document NVIDIA Tegra support Dmitry Osipenko
2020-01-06  1:33 ` [PATCH v4 02/20] usb: host: ehci-tegra: Correct teardown order of driver's removal Dmitry Osipenko
2020-01-06  1:33 ` [PATCH v4 03/20] usb: phy: tegra: Clean up ulpi_phy_power_off Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 04/20] usb: phy: tegra: Keep track of power on-off state Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 05/20] usb: phy: tegra: Hook up init/shutdown callbacks Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 06/20] usb: phy: tegra: Perform general clean up of the code Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 07/20] usb: phy: tegra: Clean up included headers Dmitry Osipenko
2020-01-06  1:34 ` Dmitry Osipenko [this message]
2020-01-06  1:34 ` [PATCH v4 09/20] usb: phy: tegra: Use generic stub for a missing VBUS regulator Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 10/20] usb: ulpi: Add resource-managed variant of otg_ulpi_create() Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 11/20] usb: phy: tegra: Use devm_otg_ulpi_create() Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 12/20] usb: phy: tegra: Use u32 for hardware register variables Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 13/20] usb: phy: tegra: Use device-tree notion of reset-GPIO's active-state Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 14/20] usb: phy: tegra: Disable VBUS regulator on tegra_usb_phy_init failure Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 15/20] usb: phy: tegra: Move utmip_pad_count checking under lock Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 16/20] usb: phy: tegra: Keep CPU interrupts enabled Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 17/20] usb: chipidea: tegra: Stop managing PHY's power Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 18/20] usb: chipidea: tegra: Add USB_TEGRA_PHY to driver's dependencies Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 19/20] usb: host: ehci-tegra: Stop managing PHY's power Dmitry Osipenko
2020-01-06  1:34 ` [PATCH v4 20/20] usb: host: ehci-tegra: Remove unused fields from tegra_ehci_hcd Dmitry Osipenko
2020-01-06 15:16   ` Alan Stern
2020-01-07 16:13     ` Dmitry Osipenko

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:aca1413db0e dfblob:268b9d9ce57 )
 OR (
bs:"[PATCH v4 08/20] usb: phy: tegra: Use relaxed versions of readl/writel" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200106013416.9604-9-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=Peter.Chen@nxp.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mirq-linux@rere.qmqm.pl \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).