[PATCH] thunderbolt: Prevent crash if non-active NVMem file is read

[Mika Westerberg <mika.westerberg@linux.intel.com>]

The driver does not populate .reg_read callback for the non-active NVMem
because the file is supposed to be write-only. However, it turns out
NVMem subsystem does not yet support this and expects that the .reg_read
callback is provided. If user reads the binary attribute it triggers
NULL pointer dereference like this one:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  ...
  Call Trace:
   bin_attr_nvmem_read+0x64/0x80
   kernfs_fop_read+0xa7/0x180
   vfs_read+0xbd/0x170
   ksys_read+0x5a/0xd0
   do_syscall_64+0x43/0x150
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this in the driver by providing .reg_read callback that always
returns an error.

Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Fixes: e6b245ccd524 ("thunderbolt: Add support for host and device NVM firmware upgrade")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
---
Once NVMem subsystem starts supporting write-only NVMems we can drop this
one.

 drivers/thunderbolt/switch.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index ad5479f21174..7d6ecc342508 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -348,6 +348,12 @@ static int tb_switch_nvm_read(void *priv, unsigned int offset, void *val,
 	return ret;
 }
 
+static int tb_switch_nvm_no_read(void *priv, unsigned int offset, void *val,
+				 size_t bytes)
+{
+	return -EPERM;
+}
+
 static int tb_switch_nvm_write(void *priv, unsigned int offset, void *val,
 			       size_t bytes)
 {
@@ -393,6 +399,7 @@ static struct nvmem_device *register_nvmem(struct tb_switch *sw, int id,
 		config.read_only = true;
 	} else {
 		config.name = "nvm_non_active";
+		config.reg_read = tb_switch_nvm_no_read;
 		config.reg_write = tb_switch_nvm_write;
 		config.root_only = true;
 	}
-- 
2.25.0