* [PATCH v2 1/1] usb: chipidea: udc: add sg list support
@ 2020-02-28 10:35 Peter Chen
0 siblings, 0 replies; only message in thread
From: Peter Chen @ 2020-02-28 10:35 UTC (permalink / raw)
To: linux-usb; +Cc: linux-imx, Peter Chen
From: Peter Chen <peter.chen@nxp.com>
For low system memory system (eg, 256MB), it may met OOM issue if the
request buffer is large (eg, 64KB). We ran out below OOM issue for f_fs.
Luckily, the f_fs supports sg list now, the OOM issue is fixed with
this patch.
ufb: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP),
nodemask=(null),cpuset=/,mems_allowed=0
CPU: 2 PID: 370 Comm: ufb Not tainted 5.4.3-1.1.0+g54b3750d61fd #1
Hardware name: NXP i.MX8MNano DDR4 EVK board (DT)
Call trace:
dump_backtrace+0x0/0x140
show_stack+0x14/0x20
dump_stack+0xb4/0xf8
warn_alloc+0xec/0x158
__alloc_pages_slowpath+0x9cc/0x9f8
__alloc_pages_nodemask+0x21c/0x280
alloc_pages_current+0x7c/0xe8
kmalloc_order+0x1c/0x88
__kmalloc+0x25c/0x298
ffs_epfile_io.isra.0+0x20c/0x7d0
ffs_epfile_read_iter+0xa8/0x188
new_sync_read+0xe4/0x170
__vfs_read+0x2c/0x40
vfs_read+0xc8/0x1a0
ksys_read+0x68/0xf0
__arm64_sys_read+0x18/0x20
el0_svc_common.constprop.0+0x68/0x160
el0_svc_handler+0x20/0x80
el0_svc+0x8/0xc
Mem-Info:
active_anon:2856 inactive_anon:5269 isolated_anon:12
active_file:5238 inactive_file:18803 isolated_file:0
unevictable:0 dirty:22 writeback:416 unstable:0
slab_reclaimable:4073 slab_unreclaimable:3408
mapped:727 shmem:7393 pagetables:37 bounce:0
free:4104 free_pcp:118 free_cma:0
Node 0 active_anon:11436kB inactive_anon:21076kB active_file:20988kB inactive_file:75216kB unevictable:0kB isolated(ano
Node 0 DMA32 free:16820kB min:1808kB low:2260kB high:2712kB active_anon:11436kB inactive_anon:21076kB active_file:2098B
lowmem_reserve[]: 0 0 0
Node 0 DMA32: 508*4kB (UME) 242*8kB (UME) 730*16kB (UM) 21*32kB (UME) 5*64kB (UME) 2*128kB (M) 0*256kB 0*512kB 0*1024kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB
31455 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
65536 pages RAM
0 pages HighMem/MovableOnly
10766 pages reserved
0 pages cma reserved
0 pages hwpoisoned
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
Changes for v2:
- Reuse add_td_to_list for sg case
- Fix some checkpatch warnings
- Add review-by from NXP internal review
drivers/usb/chipidea/udc.c | 127 +++++++++++++++++++++++++++----------
1 file changed, 95 insertions(+), 32 deletions(-)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index ffa6caee1f3b..94feaecc6059 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -338,7 +338,7 @@ static int hw_usb_reset(struct ci_hdrc *ci)
*****************************************************************************/
static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
- unsigned length)
+ unsigned int length, struct scatterlist *s)
{
int i;
u32 temp;
@@ -366,7 +366,11 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
node->ptr->token |= cpu_to_le32(mul << __ffs(TD_MULTO));
}
- temp = (u32) (hwreq->req.dma + hwreq->req.actual);
+ if (s)
+ temp = (u32) (sg_dma_address(s) + hwreq->req.actual);
+ else
+ temp = (u32) (hwreq->req.dma + hwreq->req.actual);
+
if (length) {
node->ptr->page[0] = cpu_to_le32(temp);
for (i = 1; i < TD_PAGE_COUNT; i++) {
@@ -400,6 +404,88 @@ static inline u8 _usb_addr(struct ci_hw_ep *ep)
return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
}
+static int prepare_td_for_non_sg(struct ci_hw_ep *hwep,
+ struct ci_hw_req *hwreq)
+{
+ unsigned int rest = hwreq->req.length;
+ int pages = TD_PAGE_COUNT;
+ int ret = 0;
+
+ if (rest == 0) {
+ ret = add_td_to_list(hwep, hwreq, 0, NULL);
+ if (ret < 0)
+ return ret;
+ }
+
+ /*
+ * The first buffer could be not page aligned.
+ * In that case we have to span into one extra td.
+ */
+ if (hwreq->req.dma % PAGE_SIZE)
+ pages--;
+
+ while (rest > 0) {
+ unsigned int count = min(hwreq->req.length - hwreq->req.actual,
+ (unsigned int)(pages * CI_HDRC_PAGE_SIZE));
+
+ ret = add_td_to_list(hwep, hwreq, count, NULL);
+ if (ret < 0)
+ return ret;
+
+ rest -= count;
+ }
+
+ if (hwreq->req.zero && hwreq->req.length && hwep->dir == TX
+ && (hwreq->req.length % hwep->ep.maxpacket == 0)) {
+ ret = add_td_to_list(hwep, hwreq, 0, NULL);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret;
+}
+
+static int prepare_td_per_sg(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
+ struct scatterlist *s)
+{
+ unsigned int rest = sg_dma_len(s);
+ int ret = 0;
+
+ hwreq->req.actual = 0;
+ while (rest > 0) {
+ unsigned int count = min(rest,
+ (unsigned int)(TD_PAGE_COUNT * CI_HDRC_PAGE_SIZE));
+
+ ret = add_td_to_list(hwep, hwreq, count, s);
+ if (ret < 0)
+ return ret;
+
+ rest -= count;
+ }
+
+ return ret;
+}
+
+static int prepare_td_for_sg(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
+{
+ struct usb_request *req = &hwreq->req;
+ struct scatterlist *s = req->sg;
+ int ret;
+
+ if (!s || req->zero || req->length == 0) {
+ dev_err(hwep->ci->dev, "not supported operation for sg\n");
+ return -EINVAL;
+ }
+
+ do {
+ ret = prepare_td_per_sg(hwep, hwreq, s);
+ if (ret)
+ return ret;
+ } while ((s = sg_next(s)));
+
+ return ret;
+}
+
/**
* _hardware_enqueue: configures a request at hardware level
* @hwep: endpoint
@@ -411,8 +497,6 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
{
struct ci_hdrc *ci = hwep->ci;
int ret = 0;
- unsigned rest = hwreq->req.length;
- int pages = TD_PAGE_COUNT;
struct td_node *firstnode, *lastnode;
/* don't queue twice */
@@ -426,35 +510,13 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
if (ret)
return ret;
- /*
- * The first buffer could be not page aligned.
- * In that case we have to span into one extra td.
- */
- if (hwreq->req.dma % PAGE_SIZE)
- pages--;
-
- if (rest == 0) {
- ret = add_td_to_list(hwep, hwreq, 0);
- if (ret < 0)
- goto done;
- }
-
- while (rest > 0) {
- unsigned count = min(hwreq->req.length - hwreq->req.actual,
- (unsigned)(pages * CI_HDRC_PAGE_SIZE));
- ret = add_td_to_list(hwep, hwreq, count);
- if (ret < 0)
- goto done;
-
- rest -= count;
- }
+ if (hwreq->req.num_mapped_sgs)
+ ret = prepare_td_for_sg(hwep, hwreq);
+ else
+ ret = prepare_td_for_non_sg(hwep, hwreq);
- if (hwreq->req.zero && hwreq->req.length && hwep->dir == TX
- && (hwreq->req.length % hwep->ep.maxpacket == 0)) {
- ret = add_td_to_list(hwep, hwreq, 0);
- if (ret < 0)
- goto done;
- }
+ if (ret)
+ return ret;
firstnode = list_first_entry(&hwreq->tds, struct td_node, td);
@@ -1935,6 +1997,7 @@ static int udc_start(struct ci_hdrc *ci)
ci->gadget.max_speed = USB_SPEED_HIGH;
ci->gadget.name = ci->platdata->name;
ci->gadget.otg_caps = otg_caps;
+ ci->gadget.sg_supported = 1;
if (ci->platdata->flags & CI_HDRC_REQUIRES_ALIGNED_DMA)
ci->gadget.quirk_avoids_skb_reserve = 1;
--
2.17.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2020-02-28 10:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-02-28 10:35 [PATCH v2 1/1] usb: chipidea: udc: add sg list support Peter Chen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).