* [PATCH 2/4] usb: chipidea: introduce imx7d USB charger detection
2020-04-27 9:50 [PATCH 1/4] usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer use Peter Chen
@ 2020-04-27 9:50 ` Peter Chen
2020-04-27 9:50 ` [PATCH 3/4] usb: chipidea: pull down dp for possible charger detection operation Peter Chen
2020-04-27 9:50 ` [PATCH 4/4] usb: chipidea: usbmisc_imx: using different ops for imx7d and imx7ulp Peter Chen
2 siblings, 0 replies; 4+ messages in thread
From: Peter Chen @ 2020-04-27 9:50 UTC (permalink / raw)
To: linux-usb; +Cc: linux-imx, Jun Li, Peter Chen
From: Jun Li <jun.li@nxp.com>
imx7d (and imx8mm, imx8mn) uses Samsung PHY and USB generic PHY driver.
The USB generic PHY driver is impossible to have a charger detection
for every user, so we implement USB charger detection routine at glue
layer. After the detection has finished, it will notify USB PHY
charger framework, and the uevents will be triggered.
Signed-off-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 13 +-
drivers/usb/chipidea/ci_hdrc_imx.h | 2 +
drivers/usb/chipidea/usbmisc_imx.c | 245 +++++++++++++++++++++++++++++
3 files changed, 259 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index d8e7eb2f97b9..fb4097f02391 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -271,6 +271,7 @@ static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned int event)
struct device *dev = ci->dev->parent;
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
int ret = 0;
+ struct imx_usbmisc_data *mdata = data->usbmisc_data;
switch (event) {
case CI_HDRC_IMX_HSIC_ACTIVE_EVENT:
@@ -284,11 +285,19 @@ static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned int event)
}
break;
case CI_HDRC_IMX_HSIC_SUSPEND_EVENT:
- ret = imx_usbmisc_hsic_set_connect(data->usbmisc_data);
+ ret = imx_usbmisc_hsic_set_connect(mdata);
if (ret)
dev_err(dev,
"hsic_set_connect failed, err=%d\n", ret);
break;
+ case CI_HDRC_CONTROLLER_VBUS_EVENT:
+ if (ci->vbus_active)
+ ret = imx_usbmisc_charger_detection(mdata, true);
+ else
+ ret = imx_usbmisc_charger_detection(mdata, false);
+ if (ci->usb_phy)
+ schedule_work(&ci->usb_phy->chg_work);
+ break;
default:
break;
}
@@ -415,6 +424,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
}
pdata.usb_phy = data->phy;
+ if (data->usbmisc_data)
+ data->usbmisc_data->usb_phy = data->phy;
if ((of_device_is_compatible(np, "fsl,imx53-usb") ||
of_device_is_compatible(np, "fsl,imx51-usb")) && pdata.usb_phy &&
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
index c2051aeba13f..727d02b6dbd3 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@@ -24,6 +24,7 @@ struct imx_usbmisc_data {
unsigned int hsic:1; /* HSIC controlller */
unsigned int ext_id:1; /* ID from exteranl event */
unsigned int ext_vbus:1; /* Vbus from exteranl event */
+ struct usb_phy *usb_phy;
};
int imx_usbmisc_init(struct imx_usbmisc_data *data);
@@ -31,5 +32,6 @@ int imx_usbmisc_init_post(struct imx_usbmisc_data *data);
int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled);
int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data);
int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on);
+int imx_usbmisc_charger_detection(struct imx_usbmisc_data *data, bool connect);
#endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index e81e33c26e6c..8d7e78657e3d 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -8,6 +8,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/usb/otg.h>
#include "ci_hdrc_imx.h"
@@ -99,6 +100,32 @@
#define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID MX7D_USB_VBUS_WAKEUP_SOURCE(1)
#define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID MX7D_USB_VBUS_WAKEUP_SOURCE(2)
#define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END MX7D_USB_VBUS_WAKEUP_SOURCE(3)
+/* The default DM/DP value is pull-down */
+#define MX7D_USBNC_USB_CTRL2_OPMODE(v) (v << 6)
+#define MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING MX7D_USBNC_USB_CTRL2_OPMODE(1)
+#define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK (BIT(7) | BIT(6))
+#define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN BIT(8)
+#define MX7D_USBNC_USB_CTRL2_DP_OVERRIDE_VAL BIT(12)
+#define MX7D_USBNC_USB_CTRL2_DP_OVERRIDE_EN BIT(13)
+#define MX7D_USBNC_USB_CTRL2_DM_OVERRIDE_VAL BIT(14)
+#define MX7D_USBNC_USB_CTRL2_DM_OVERRIDE_EN BIT(15)
+#define MX7D_USBNC_USB_CTRL2_DP_DM_MASK (BIT(12) | BIT(13) | \
+ BIT(14) | BIT(15))
+
+#define MX7D_USB_OTG_PHY_CFG1 0x30
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL BIT(0)
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 BIT(1)
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 BIT(2)
+#define MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB BIT(3)
+#define MX7D_USB_OTG_PHY_CFG2_DRVVBUS0 BIT(16)
+
+#define MX7D_USB_OTG_PHY_CFG2 0x34
+
+#define MX7D_USB_OTG_PHY_STATUS 0x3c
+#define MX7D_USB_OTG_PHY_STATUS_LINE_STATE0 BIT(0)
+#define MX7D_USB_OTG_PHY_STATUS_LINE_STATE1 BIT(1)
+#define MX7D_USB_OTG_PHY_STATUS_VBUS_VLD BIT(3)
+#define MX7D_USB_OTG_PHY_STATUS_CHRGDET BIT(29)
#define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \
MX6_BM_ID_WAKEUP)
@@ -114,6 +141,8 @@ struct usbmisc_ops {
int (*hsic_set_connect)(struct imx_usbmisc_data *data);
/* It's called during suspend/resume */
int (*hsic_set_clk)(struct imx_usbmisc_data *data, bool enabled);
+ /* usb charger detection */
+ int (*charger_detection)(struct imx_usbmisc_data *data);
};
struct imx_usbmisc {
@@ -621,6 +650,188 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
return 0;
}
+static int imx7d_charger_secondary_detection(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ struct usb_phy *usb_phy = data->usb_phy;
+ int val;
+ unsigned long flags;
+
+ /* VDM_SRC is connected to D- and IDP_SINK is connected to D+ */
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
+ MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 |
+ MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL,
+ usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ usleep_range(1000, 2000);
+
+ /*
+ * Per BC 1.2, check voltage of D+:
+ * DCP: if greater than VDAT_REF;
+ * CDP: if less than VDAT_REF.
+ */
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+ if (val & MX7D_USB_OTG_PHY_STATUS_CHRGDET) {
+ dev_dbg(data->dev, "It is a dedicate charging port\n");
+ usb_phy->chg_type = DCP_TYPE;
+ } else {
+ dev_dbg(data->dev, "It is a charging downstream port\n");
+ usb_phy->chg_type = CDP_TYPE;
+ }
+
+ return 0;
+}
+
+static void imx7_disable_charger_detector(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ val &= ~(MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB |
+ MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
+ MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 |
+ MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL);
+ writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+
+ /* Set OPMODE to be 2'b00 and disable its override */
+ val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK;
+ writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2);
+
+ val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ writel(val & ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+}
+
+static int imx7d_charger_data_contact_detect(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 val;
+ int i, data_pin_contact_count = 0;
+
+ /* Enable Data Contact Detect (DCD) per the USB BC 1.2 */
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB,
+ usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ for (i = 0; i < 100; i = i + 1) {
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+ if (!(val & MX7D_USB_OTG_PHY_STATUS_LINE_STATE0)) {
+ if (data_pin_contact_count++ > 5)
+ /* Data pin makes contact */
+ break;
+ usleep_range(5000, 10000);
+ } else {
+ data_pin_contact_count = 0;
+ usleep_range(5000, 6000);
+ }
+ }
+
+ /* Disable DCD after finished data contact check */
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ writel(val & ~MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB,
+ usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ if (i == 100) {
+ dev_err(data->dev,
+ "VBUS is coming from a dedicated power supply.\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static int imx7d_charger_primary_detection(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ struct usb_phy *usb_phy = data->usb_phy;
+ unsigned long flags;
+ u32 val;
+
+ /* VDP_SRC is connected to D+ and IDM_SINK is connected to D- */
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ val &= ~MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL;
+ writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
+ MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0,
+ usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ usleep_range(1000, 2000);
+
+ /* Check if D- is less than VDAT_REF to determine an SDP per BC 1.2 */
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+ if (!(val & MX7D_USB_OTG_PHY_STATUS_CHRGDET)) {
+ dev_dbg(data->dev, "It is a standard downstream port\n");
+ usb_phy->chg_type = SDP_TYPE;
+ }
+
+ return 0;
+}
+
+/**
+ * Whole charger detection process:
+ * 1. OPMODE override to be non-driving
+ * 2. Data contact check
+ * 3. Primary detection
+ * 4. Secondary detection
+ * 5. Disable charger detection
+ */
+static int imx7d_charger_detection(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ struct usb_phy *usb_phy = data->usb_phy;
+ unsigned long flags;
+ u32 val;
+ int ret;
+
+ /* Check if vbus is valid */
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
+ if (!(val & MX7D_USB_OTG_PHY_STATUS_VBUS_VLD)) {
+ dev_err(data->dev, "vbus is error\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Keep OPMODE to be non-driving mode during the whole
+ * charger detection process.
+ */
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK;
+ val |= MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING;
+ writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2);
+
+ val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ writel(val | MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ ret = imx7d_charger_data_contact_detect(data);
+ if (ret)
+ return ret;
+
+ ret = imx7d_charger_primary_detection(data);
+ if (!ret && usb_phy->chg_type != SDP_TYPE)
+ ret = imx7d_charger_secondary_detection(data);
+
+ imx7_disable_charger_detector(data);
+
+ return ret;
+}
+
static const struct usbmisc_ops imx25_usbmisc_ops = {
.init = usbmisc_imx25_init,
.post = usbmisc_imx25_post,
@@ -659,6 +870,7 @@ static const struct usbmisc_ops imx6sx_usbmisc_ops = {
static const struct usbmisc_ops imx7d_usbmisc_ops = {
.init = usbmisc_imx7d_init,
.set_wakeup = usbmisc_imx7d_set_wakeup,
+ .charger_detection = imx7d_charger_detection,
};
static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data)
@@ -737,6 +949,39 @@ int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on)
return usbmisc->ops->hsic_set_clk(data, on);
}
EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_clk);
+
+int imx_usbmisc_charger_detection(struct imx_usbmisc_data *data, bool connect)
+{
+ struct imx_usbmisc *usbmisc;
+ struct usb_phy *usb_phy;
+ int ret = 0;
+
+ if (!data)
+ return -EINVAL;
+
+ usbmisc = dev_get_drvdata(data->dev);
+ usb_phy = data->usb_phy;
+ if (!usbmisc->ops->charger_detection)
+ return -ENOTSUPP;
+
+ if (connect) {
+ ret = usbmisc->ops->charger_detection(data);
+ if (ret) {
+ dev_err(data->dev,
+ "Error occurs during detection: %d\n",
+ ret);
+ usb_phy->chg_state = USB_CHARGER_ABSENT;
+ } else {
+ usb_phy->chg_state = USB_CHARGER_PRESENT;
+ }
+ } else {
+ usb_phy->chg_state = USB_CHARGER_ABSENT;
+ usb_phy->chg_type = UNKNOWN_TYPE;
+ }
+ return ret;
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_charger_detection);
+
static const struct of_device_id usbmisc_imx_dt_ids[] = {
{
.compatible = "fsl,imx25-usbmisc",
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 4/4] usb: chipidea: usbmisc_imx: using different ops for imx7d and imx7ulp
2020-04-27 9:50 [PATCH 1/4] usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer use Peter Chen
2020-04-27 9:50 ` [PATCH 2/4] usb: chipidea: introduce imx7d USB charger detection Peter Chen
2020-04-27 9:50 ` [PATCH 3/4] usb: chipidea: pull down dp for possible charger detection operation Peter Chen
@ 2020-04-27 9:50 ` Peter Chen
2 siblings, 0 replies; 4+ messages in thread
From: Peter Chen @ 2020-04-27 9:50 UTC (permalink / raw)
To: linux-usb; +Cc: linux-imx, Peter Chen
From: Peter Chen <peter.chen@nxp.com>
imx7ulp uses different USB PHY with imx7d (MXS PHY vs PICO PHY), so the
features are supported by non-core register are a little different.
For example, autoresume feature is supported by all controllers for
imx7ulp, but for imx7d, it is only supported by non-HSIC controller.
Besides, these two platforms use different HSIC controller, imx7ulp
needs software operation, but imx7d doesn't.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
drivers/usb/chipidea/usbmisc_imx.c | 89 ++++++++++++++++++++++++++++--
1 file changed, 84 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 8d7e78657e3d..f136876cb4a3 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -100,6 +100,7 @@
#define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID MX7D_USB_VBUS_WAKEUP_SOURCE(1)
#define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID MX7D_USB_VBUS_WAKEUP_SOURCE(2)
#define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END MX7D_USB_VBUS_WAKEUP_SOURCE(3)
+#define MX7D_USBNC_AUTO_RESUME BIT(2)
/* The default DM/DP value is pull-down */
#define MX7D_USBNC_USB_CTRL2_OPMODE(v) (v << 6)
#define MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING MX7D_USBNC_USB_CTRL2_OPMODE(1)
@@ -638,10 +639,17 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
reg |= MX6_BM_PWR_POLARITY;
writel(reg, usbmisc->base);
- reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
- reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
- writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID,
- usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ /* SoC non-burst setting */
+ reg = readl(usbmisc->base);
+ writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base);
+
+ if (!data->hsic) {
+ reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
+ writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID
+ | MX7D_USBNC_AUTO_RESUME,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ }
spin_unlock_irqrestore(&usbmisc->lock, flags);
@@ -832,6 +840,70 @@ static int imx7d_charger_detection(struct imx_usbmisc_data *data)
return ret;
}
+static int usbmisc_imx7ulp_init(struct imx_usbmisc_data *data)
+{
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ unsigned long flags;
+ u32 reg;
+
+ if (data->index >= 1)
+ return -EINVAL;
+
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ reg = readl(usbmisc->base);
+ if (data->disable_oc) {
+ reg |= MX6_BM_OVER_CUR_DIS;
+ } else {
+ reg &= ~MX6_BM_OVER_CUR_DIS;
+
+ /*
+ * If the polarity is not configured keep it as setup by the
+ * bootloader.
+ */
+ if (data->oc_pol_configured && data->oc_pol_active_low)
+ reg |= MX6_BM_OVER_CUR_POLARITY;
+ else if (data->oc_pol_configured)
+ reg &= ~MX6_BM_OVER_CUR_POLARITY;
+ }
+ /* If the polarity is not set keep it as setup by the bootlader */
+ if (data->pwr_pol == 1)
+ reg |= MX6_BM_PWR_POLARITY;
+
+ writel(reg, usbmisc->base);
+
+ /* SoC non-burst setting */
+ reg = readl(usbmisc->base);
+ writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base);
+
+ if (data->hsic) {
+ reg = readl(usbmisc->base);
+ writel(reg | MX6_BM_UTMI_ON_CLOCK, usbmisc->base);
+
+ reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+ reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
+ writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
+
+ /*
+ * For non-HSIC controller, the autoresume is enabled
+ * at MXS PHY driver (usbphy_ctrl bit18).
+ */
+ reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ writel(reg | MX7D_USBNC_AUTO_RESUME,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ } else {
+ reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
+ writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID,
+ usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ }
+
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ usbmisc_imx7d_set_wakeup(data, false);
+
+ return 0;
+}
+
static const struct usbmisc_ops imx25_usbmisc_ops = {
.init = usbmisc_imx25_init,
.post = usbmisc_imx25_post,
@@ -873,6 +945,13 @@ static const struct usbmisc_ops imx7d_usbmisc_ops = {
.charger_detection = imx7d_charger_detection,
};
+static const struct usbmisc_ops imx7ulp_usbmisc_ops = {
+ .init = usbmisc_imx7ulp_init,
+ .set_wakeup = usbmisc_imx7d_set_wakeup,
+ .hsic_set_connect = usbmisc_imx6_hsic_set_connect,
+ .hsic_set_clk = usbmisc_imx6_hsic_set_clk,
+};
+
static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data)
{
struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
@@ -1025,7 +1104,7 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
},
{
.compatible = "fsl,imx7ulp-usbmisc",
- .data = &imx7d_usbmisc_ops,
+ .data = &imx7ulp_usbmisc_ops,
},
{ /* sentinel */ }
};
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread