[PATCH 5.4 109/147] usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B

[PATCH 5.4 109/147] usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B

[Greg Kroah-Hartman]

From: Eugeniu Rosca <erosca@de.adit-jv.com>

commit 76e1ef1d81a4129d7e2fb8c48c83b166d1c8e040 upstream.

On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]:
> This patch prevents my Raven Ridge xHCI from getting runtime suspend.

The problem described in v5.6 commit 1208f9e1d758c9 ("USB: hub: Fix the
broken detection of USB3 device in SMSC hub") applies solely to the
USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board,
manufactured by Shimafuji Electric Inc [3].

Despite that, the aforementioned commit applied the quirk to _all_ hubs
carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than
initially expected. Consequently, the quirk is now enabled on platforms
carrying SMSC/Microchip hub models which potentially don't exhibit the
original issue.

To avoid reports like [1], further limit the quirk's scope to
USB5534B [2], by employing both Vendor and Product ID checks.

Tested on H3ULCB + Kingfisher rev. M05.

[1] https://lore.kernel.org/linux-renesas-soc/73933975-6F0E-40F5-9584-D2B8F615C0F3@canonical.com/
[2] https://www.microchip.com/wwwproducts/en/USB5534B
[3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf
[4] https://devicehunt.com/search/type/usb/vendor/0424/device/any

Fixes: 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
Cc: stable@vger.kernel.org # v4.14+
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Hardik Gajjar <hgajjar@de.adit-jv.com>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200514220246.13290-1-erosca@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -38,6 +38,7 @@
 
 #define USB_VENDOR_GENESYS_LOGIC		0x05e3
 #define USB_VENDOR_SMSC				0x0424
+#define USB_PRODUCT_USB5534B			0x5534
 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
 #define HUB_QUIRK_DISABLE_AUTOSUSPEND		0x02
 
@@ -5506,8 +5507,11 @@ out_hdev_lock:
 }
 
 static const struct usb_device_id hub_id_table[] = {
-    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_CLASS,
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+                   | USB_DEVICE_ID_MATCH_PRODUCT
+                   | USB_DEVICE_ID_MATCH_INT_CLASS,
       .idVendor = USB_VENDOR_SMSC,
+      .idProduct = USB_PRODUCT_USB5534B,
       .bInterfaceClass = USB_CLASS_HUB,
       .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
     { .match_flags = USB_DEVICE_ID_MATCH_VENDOR

[PATCH 5.4 125/147] dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()

[Greg Kroah-Hartman]

From: John Stultz <john.stultz@linaro.org>

commit 00e21763f2c8cab21b7befa52996d1b18bde5c42 upstream.

The check for the HWO flag in dwc3_gadget_ep_reclaim_trb_sg()
causes us to break out of the loop before we call
dwc3_gadget_ep_reclaim_completed_trb(), which is what likely
should be clearing the HWO flag.

This can cause odd behavior where we never reclaim all the trbs
in the sg list, so we never call giveback on a usb req, and that
will causes transfer stalls.

This effectively resovles the adb stalls seen on HiKey960
after userland changes started only using AIO in adbd.

Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Cc: Yang Fei <fei.yang@intel.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Tejas Joglekar <tejas.joglekar@synopsys.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Josh Gao <jmgao@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: stable@vger.kernel.org #4.20+
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc3/gadget.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2480,9 +2480,6 @@ static int dwc3_gadget_ep_reclaim_trb_sg
 	for_each_sg(sg, s, pending, i) {
 		trb = &dep->trb_pool[dep->trb_dequeue];
 
-		if (trb->ctrl & DWC3_TRB_CTRL_HWO)
-			break;
-
 		req->sg = sg_next(s);
 		req->num_pending_sgs--;