linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Chen <peter.chen@nxp.com>
To: balbi@kernel.org
Cc: linux-usb@vger.kernel.org, linux-imx@nxp.com, pawell@cadence.com,
	rogerq@ti.com, gregkh@linuxfoundation.org, jun.li@nxp.com,
	Peter Chen <peter.chen@nxp.com>
Subject: [PATCH 1/3] usb: cdns3: ep0: fix some endian issues
Date: Wed,  3 Jun 2020 14:53:54 +0800	[thread overview]
Message-ID: <20200603065356.14124-2-peter.chen@nxp.com> (raw)
In-Reply-To: <20200603065356.14124-1-peter.chen@nxp.com>

It is found by sparse.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
 drivers/usb/cdns3/ep0.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c
index 82645a2a0f52..2465a84e8fee 100644
--- a/drivers/usb/cdns3/ep0.c
+++ b/drivers/usb/cdns3/ep0.c
@@ -37,18 +37,18 @@ static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev,
 	struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
 	struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
 
-	priv_ep->trb_pool[0].buffer = TRB_BUFFER(dma_addr);
-	priv_ep->trb_pool[0].length = TRB_LEN(length);
+	priv_ep->trb_pool[0].buffer = cpu_to_le32(TRB_BUFFER(dma_addr));
+	priv_ep->trb_pool[0].length = cpu_to_le32(TRB_LEN(length));
 
 	if (zlp) {
-		priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_TYPE(TRB_NORMAL);
-		priv_ep->trb_pool[1].buffer = TRB_BUFFER(dma_addr);
-		priv_ep->trb_pool[1].length = TRB_LEN(0);
-		priv_ep->trb_pool[1].control = TRB_CYCLE | TRB_IOC |
-		    TRB_TYPE(TRB_NORMAL);
+		priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_NORMAL));
+		priv_ep->trb_pool[1].buffer = cpu_to_le32(TRB_BUFFER(dma_addr));
+		priv_ep->trb_pool[1].length = cpu_to_le32(TRB_LEN(0));
+		priv_ep->trb_pool[1].control = cpu_to_le32(TRB_CYCLE | TRB_IOC |
+		    TRB_TYPE(TRB_NORMAL));
 	} else {
-		priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_IOC |
-		    TRB_TYPE(TRB_NORMAL);
+		priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_IOC |
+		    TRB_TYPE(TRB_NORMAL));
 		priv_ep->trb_pool[1].control = 0;
 	}
 
@@ -264,11 +264,11 @@ static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev,
 	case USB_RECIP_INTERFACE:
 		return cdns3_ep0_delegate_req(priv_dev, ctrl);
 	case USB_RECIP_ENDPOINT:
-		index = cdns3_ep_addr_to_index(ctrl->wIndex);
+		index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex));
 		priv_ep = priv_dev->eps[index];
 
 		/* check if endpoint is stalled or stall is pending */
-		cdns3_select_ep(priv_dev, ctrl->wIndex);
+		cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex));
 		if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts)) ||
 		    (priv_ep->flags & EP_STALL_PENDING))
 			usb_status =  BIT(USB_ENDPOINT_HALT);
@@ -380,10 +380,10 @@ static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev,
 	if (!(ctrl->wIndex & ~USB_DIR_IN))
 		return 0;
 
-	index = cdns3_ep_addr_to_index(ctrl->wIndex);
+	index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex));
 	priv_ep = priv_dev->eps[index];
 
-	cdns3_select_ep(priv_dev, ctrl->wIndex);
+	cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex));
 
 	if (set)
 		__cdns3_gadget_ep_set_halt(priv_ep);
@@ -444,7 +444,7 @@ static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev,
 	if (priv_dev->gadget.state < USB_STATE_ADDRESS)
 		return -EINVAL;
 
-	if (ctrl_req->wLength != 6) {
+	if (le16_to_cpu(ctrl_req->wLength) != 6) {
 		dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n",
 			ctrl_req->wLength);
 		return -EINVAL;
@@ -468,7 +468,7 @@ static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev,
 	if (ctrl_req->wIndex || ctrl_req->wLength)
 		return -EINVAL;
 
-	priv_dev->isoch_delay = ctrl_req->wValue;
+	priv_dev->isoch_delay = le16_to_cpu(ctrl_req->wValue);
 
 	return 0;
 }
-- 
2.17.1


  reply	other threads:[~2020-06-03  6:53 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-03  6:53 [PATCH 0/3] usb: cdns3: fix some endian issues Peter Chen
2020-06-03  6:53 ` Peter Chen [this message]
2020-07-09  6:45   ` [PATCH 1/3] usb: cdns3: ep0: " Felipe Balbi
2020-07-09  7:02     ` Peter Chen
2020-07-09  7:11       ` Felipe Balbi
2020-06-03  6:53 ` [PATCH 2/3] usb: cdns3: trace: " Peter Chen
2020-06-03  6:53 ` [PATCH 3/3] usb: cdns3: gadget: " Peter Chen
2020-07-07  6:12 ` [PATCH 0/3] usb: cdns3: " Peter Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200603065356.14124-2-peter.chen@nxp.com \
    --to=peter.chen@nxp.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jun.li@nxp.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=pawell@cadence.com \
    --cc=rogerq@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).