From: Peter Chen <peter.chen@nxp.com>
To: Jun Li <jun.li@nxp.com>
Cc: "balbi@kernel.org" <balbi@kernel.org>,
"mathias.nyman@intel.com" <mathias.nyman@intel.com>,
"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
dl-linux-imx <linux-imx@nxp.com>,
"pawell@cadence.com" <pawell@cadence.com>,
"rogerq@ti.com" <rogerq@ti.com>,
"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Subject: Re: [PATCH v3 2/9] usb: cdns3: add runtime PM support
Date: Thu, 11 Jun 2020 01:42:14 +0000 [thread overview]
Message-ID: <20200611014238.GA8276@b29397-desktop> (raw)
In-Reply-To: <VE1PR04MB65285C5FBA48EC54BE7DE61189830@VE1PR04MB6528.eurprd04.prod.outlook.com>
On 20-06-10 06:10:15, Jun Li wrote:
> > /**
> > * cdns3_probe - probe for cdns3 core device
> > * @pdev: Pointer to cdns3 core platform device @@ -432,6 +456,7 @@ static int
> > cdns3_probe(struct platform_device *pdev)
> > return -ENOMEM;
> >
> > cdns->dev = dev;
> > + cdns->pdata = dev_get_platdata(dev);
> >
> > platform_set_drvdata(pdev, cdns);
> >
> > @@ -481,6 +506,15 @@ static int cdns3_probe(struct platform_device *pdev)
> >
> > cdns->otg_res = *res;
> >
> > + cdns->wakeup_irq = platform_get_irq_byname(pdev, "wakeup");
>
> platform_get_irq_byname_optional
Ok
>
> > + if (cdns->wakeup_irq == -EPROBE_DEFER)
> > + return cdns->wakeup_irq;
> > +
> > + if (cdns->wakeup_irq < 0) {
> > + dev_dbg(dev, "couldn't get wakeup irq\n");
> > + cdns->wakeup_irq = 0x0;
> > + }
> > +
> > mutex_init(&cdns->mutex);
> >
> > cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy"); @@ -517,6
> > +551,19 @@ static int cdns3_probe(struct platform_device *pdev)
> > goto err3;
> > }
> >
> > + if (cdns->wakeup_irq) {
> > + ret = devm_request_threaded_irq(cdns->dev, cdns->wakeup_irq,
> > + cdns3_wakeup_irq,
> > + NULL,
> > + IRQF_SHARED,
> > + dev_name(cdns->dev), cdns);
> > +
> > + if (ret) {
> > + dev_err(cdns->dev, "couldn't register wakeup irq handler\n");
> > + goto err3;
> > + }
> > + }
> > +
> > ret = cdns3_drd_init(cdns);
> > if (ret)
> > goto err4;
> > @@ -525,9 +572,11 @@ static int cdns3_probe(struct platform_device *pdev)
> > if (ret)
> > goto err4;
> >
> > + spin_lock_init(&cdns->lock);
> > device_set_wakeup_capable(dev, true);
> > pm_runtime_set_active(dev);
> > pm_runtime_enable(dev);
> > + pm_runtime_forbid(dev);
> >
> > /*
> > * The controller needs less time between bus and controller suspend, @@ -574,52
> > +623,124 @@ static int cdns3_remove(struct platform_device *pdev)
> > return 0;
> > }
> >
> > -#ifdef CONFIG_PM_SLEEP
> > +#ifdef CONFIG_PM
> >
> > -static int cdns3_suspend(struct device *dev)
> > +static int cdns3_set_platform_suspend(struct device *dev,
> > + bool suspend, bool wakeup)
> > +{
> > + struct cdns3 *cdns = dev_get_drvdata(dev);
> > + int ret = 0;
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&cdns->lock, flags);
>
> This really need a big spinlock for all platforms specific
> suspend operations? I see you have a 100us polling in your
> platform_suspend implementation, and also the spinlock
> seems can be inside your implementation to protect really
> needed part.
It will remove this spinlock, some other platforms may could
sleep at its glue layer.
>
> > + if (cdns->pdata && cdns->pdata->platform_suspend)
> > + ret = cdns->pdata->platform_suspend(dev, suspend, wakeup);
> > +
> > + spin_unlock_irqrestore(&cdns->lock, flags);
> > +
> > + return ret;
> > +}
> > +
> > +static int cdns3_controller_suspend(struct device *dev, pm_message_t
> > +msg)
> > {
> > struct cdns3 *cdns = dev_get_drvdata(dev);
> > + bool wakeup;
> > unsigned long flags;
> >
> > - if (cdns->role == USB_ROLE_HOST)
> > + if (cdns->in_lpm)
> > return 0;
> >
> > - if (pm_runtime_status_suspended(dev))
> > - pm_runtime_resume(dev);
> > + if (PMSG_IS_AUTO(msg))
> > + wakeup = true;
> > + else
> > + wakeup = device_may_wakeup(dev);
> >
> > - if (cdns->roles[cdns->role]->suspend) {
> > - spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
> > - cdns->roles[cdns->role]->suspend(cdns, false);
> > - spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
> > - }
> > + cdns3_set_platform_suspend(cdns->dev, true, wakeup);
> > + cdns3_set_phy_power(cdns, false);
> > + spin_lock_irqsave(&cdns->lock, flags);
> > + cdns->in_lpm = true;
> > + spin_unlock_irqrestore(&cdns->lock, flags);
> >
> > return 0;
> > }
> >
> > -static int cdns3_resume(struct device *dev)
> > +static int cdns3_controller_resume(struct device *dev, pm_message_t
> > +msg)
> > {
> > struct cdns3 *cdns = dev_get_drvdata(dev);
> > + int ret;
> > unsigned long flags;
> >
> > - if (cdns->role == USB_ROLE_HOST)
> > + if (!cdns->in_lpm)
> > return 0;
> >
> > - if (cdns->roles[cdns->role]->resume) {
> > - spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
> > + ret = cdns3_set_phy_power(cdns, true);
> > + if (ret)
> > + return ret;
> > +
> > + cdns3_set_platform_suspend(cdns->dev, false, false);
> > +
> > + spin_lock_irqsave(&cdns->lock, flags);
> > + if (cdns->roles[cdns->role]->resume && !PMSG_IS_AUTO(msg))
> > cdns->roles[cdns->role]->resume(cdns, false);
> > - spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
> > +
> > + cdns->in_lpm = false;
> > + spin_unlock_irqrestore(&cdns->lock, flags);
> > + if (cdns->wakeup_int) {
> > + cdns->wakeup_int = false;
> > + enable_irq(cdns->otg_irq);
>
> enable_irq(cdns->wakeup_irq)
OK
>
> > }
> >
> > + return ret;
> > +}
> > +
> > +static int cdns3_runtime_suspend(struct device *dev) {
> > + return cdns3_controller_suspend(dev, PMSG_AUTO_SUSPEND); }
> > +
> > +static int cdns3_runtime_resume(struct device *dev) {
> > + return cdns3_controller_resume(dev, PMSG_AUTO_RESUME); } #ifdef
> > +CONFIG_PM_SLEEP
> > +
> > +static int cdns3_suspend(struct device *dev) {
> > + struct cdns3 *cdns = dev_get_drvdata(dev);
> > + unsigned long flags;
> > +
> > + if (pm_runtime_status_suspended(dev))
> > + pm_runtime_resume(dev);
> > +
> > + if (cdns->roles[cdns->role]->suspend) {
> > + spin_lock_irqsave(&cdns->lock, flags);
> > + cdns->roles[cdns->role]->suspend(cdns, false);
> > + spin_unlock_irqrestore(&cdns->lock, flags);
> > + }
> > +
> > + return cdns3_controller_suspend(dev, PMSG_SUSPEND); }
> > +
> > +static int cdns3_resume(struct device *dev) {
> > + int ret;
> > +
> > + ret = cdns3_controller_resume(dev, PMSG_RESUME);
> > + if (ret)
> > + return ret;
> > +
> > pm_runtime_disable(dev);
> > pm_runtime_set_active(dev);
> > pm_runtime_enable(dev);
> >
> > - return 0;
> > + return ret;
> > }
> > -#endif
> > +#endif /* CONFIG_PM_SLEEP */
> > +#endif /* CONFIG_PM */
> >
> > static const struct dev_pm_ops cdns3_pm_ops = {
> > SET_SYSTEM_SLEEP_PM_OPS(cdns3_suspend, cdns3_resume)
> > + SET_RUNTIME_PM_OPS(cdns3_runtime_suspend, cdns3_runtime_resume, NULL)
> > };
> >
> > #ifdef CONFIG_OF
> > diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h index
> > 1ad1f1fe61e9..fdbcf557a61f 100644
> > --- a/drivers/usb/cdns3/core.h
> > +++ b/drivers/usb/cdns3/core.h
> > @@ -38,6 +38,12 @@ struct cdns3_role_driver { };
> >
> > #define CDNS3_XHCI_RESOURCES_NUM 2
> > +
> > +struct cdns3_platform_data {
> > + int (*platform_suspend)(struct device *dev,
> > + bool suspend, bool wakeup);
> > +};
> > +
> > /**
> > * struct cdns3 - Representation of Cadence USB3 DRD controller.
> > * @dev: pointer to Cadence device struct @@ -50,6 +56,7 @@ struct cdns3_role_driver
> > {
> > * @otg_regs: pointer to base of otg registers
> > * @otg_irq: irq number for otg controller
> > * @dev_irq: irq number for device controller
> > + * @dev_irq: irq number for wakeup event
>
> @wakeup_irq
Ok
>
> > * @roles: array of supported roles for this controller
> > * @role: current role
> > * @host_dev: the child host device pointer for cdns3 core @@ -62,6 +69,10 @@ struct
> > cdns3_role_driver {
> > * This field based on firmware setting, kernel configuration
> > * and hardware configuration.
> > * @role_sw: pointer to role switch object.
> > + * @in_lpm: indicate the controller is in low power mode
> > + * @wakeup_int: wakeup interrupt occurs
> > + * @pdata: platform data from glue layer
> > + * @lock: spinlock structure
> > */
> > struct cdns3 {
> > struct device *dev;
> > @@ -79,6 +90,7 @@ struct cdns3 {
> >
> > int otg_irq;
> > int dev_irq;
> > + int wakeup_irq;
> > struct cdns3_role_driver *roles[USB_ROLE_DEVICE + 1];
> > enum usb_role role;
> > struct platform_device *host_dev;
> > @@ -89,6 +101,10 @@ struct cdns3 {
> > struct mutex mutex;
> > enum usb_dr_mode dr_mode;
> > struct usb_role_switch *role_sw;
> > + bool in_lpm;
> > + bool wakeup_int;
>
> Too close to wakeup_irq, maybe wakeup_pending?
OK
Peter
>
> Li Jun
> > + struct cdns3_platform_data *pdata;
> > + spinlock_t lock;
> > };
> >
> > int cdns3_hw_role_switch(struct cdns3 *cdns); diff --git
> > a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c index
> > 58089841ed52..ac90a484e63c 100644
> > --- a/drivers/usb/cdns3/drd.c
> > +++ b/drivers/usb/cdns3/drd.c
> > @@ -281,6 +281,9 @@ static irqreturn_t cdns3_drd_irq(int irq, void *data)
> > if (cdns->dr_mode != USB_DR_MODE_OTG)
> > return ret;
> >
> > + if (cdns->in_lpm)
> > + return ret;
> > +
> > reg = readl(&cdns->otg_regs->ivect);
> >
> > if (!reg)
> > diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index
> > 7babba9dd916..eac01b1a4958 100644
> > --- a/drivers/usb/cdns3/gadget.c
> > +++ b/drivers/usb/cdns3/gadget.c
> > @@ -1765,9 +1765,13 @@ static void cdns3_check_usb_interrupt_proceed(struct
> > cdns3_device *priv_dev, static irqreturn_t cdns3_device_irq_handler(int irq, void
> > *data) {
> > struct cdns3_device *priv_dev = data;
> > + struct cdns3 *cdns = dev_get_drvdata(priv_dev->dev);
> > irqreturn_t ret = IRQ_NONE;
> > u32 reg;
> >
> > + if (cdns->in_lpm)
> > + return ret;
> > +
> > /* check USB device interrupt */
> > reg = readl(&priv_dev->regs->usb_ists);
> > if (reg) {
> > diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c index
> > ad788bf3fe4f..b579ef15f4e0 100644
> > --- a/drivers/usb/cdns3/host.c
> > +++ b/drivers/usb/cdns3/host.c
> > @@ -13,11 +13,13 @@
> > #include "core.h"
> > #include "drd.h"
> > #include "host-export.h"
> > +#include <linux/usb/hcd.h>
> >
> > static int __cdns3_host_init(struct cdns3 *cdns) {
> > struct platform_device *xhci;
> > int ret;
> > + struct usb_hcd *hcd;
> >
> > cdns3_drd_switch_host(cdns, 1);
> >
> > @@ -43,6 +45,11 @@ static int __cdns3_host_init(struct cdns3 *cdns)
> > goto err1;
> > }
> >
> > + /* Glue needs to access xHCI region register for Power management */
> > + hcd = platform_get_drvdata(xhci);
> > + if (hcd)
> > + cdns->xhci_regs = hcd->regs;
> > +
> > return 0;
> > err1:
> > platform_device_put(xhci);
> > --
> > 2.17.1
>
--
Thanks,
Peter Chen
next prev parent reply other threads:[~2020-06-11 1:42 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-08 7:10 [PATCH v3 0/9] usb: some PM changes for cdns3 and xhci-plat Peter Chen
2020-06-08 7:10 ` [PATCH v3 1/9] usb: cdns3: introduce cdns3_set_phy_power API Peter Chen
2020-06-08 7:10 ` [PATCH v3 2/9] usb: cdns3: add runtime PM support Peter Chen
2020-06-10 6:10 ` Jun Li
2020-06-11 1:42 ` Peter Chen [this message]
2020-06-08 7:10 ` [PATCH v3 3/9] usb: cdns3: imx: add glue layer runtime pm implementation Peter Chen
2020-06-08 7:10 ` [PATCH v3 4/9] usb: host: xhci-plat: add platform data support Peter Chen
2020-06-08 7:10 ` [PATCH v3 5/9] usb: host: xhci-plat: add .suspend_quirk for struct xhci_plat_priv Peter Chen
2020-06-08 7:10 ` [PATCH v3 6/9] usb: host: xhci-plat: delete the unnecessary code Peter Chen
2020-06-08 7:10 ` [PATCH v3 7/9] usb: host: xhci-plat: add priv quirk for skip PHY initialization Peter Chen
2020-06-08 7:10 ` [PATCH v3 8/9] usb: cdns3: host: add .suspend_quirk for xhci-plat.c Peter Chen
2020-06-08 7:10 ` [PATCH v3 9/9] usb: cdns3: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT Peter Chen
2020-06-24 1:34 ` [PATCH v3 0/9] usb: some PM changes for cdns3 and xhci-plat Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200611014238.GA8276@b29397-desktop \
--to=peter.chen@nxp.com \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jun.li@nxp.com \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=pawell@cadence.com \
--cc=rogerq@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).