linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Chen <peter.chen@nxp.com>
To: balbi@kernel.org, mathias.nyman@intel.com
Cc: linux-usb@vger.kernel.org, linux-imx@nxp.com, pawell@cadence.com,
	rogerq@ti.com, gregkh@linuxfoundation.org, jun.li@nxp.com,
	Peter Chen <peter.chen@nxp.com>
Subject: [PATCH v4 0/9] usb: some PM changes for cdns3 and xhci-plat
Date: Fri,  3 Jul 2020 14:26:44 +0800	[thread overview]
Message-ID: <20200703062653.29159-1-peter.chen@nxp.com> (raw)

Hi Felipe & Mathias,

In this series, it adds cdns3 runtime PM support as well as some
xhci-plat changes, and verified at NXP i.MX8QM and i.MX8QXP platforms.

Patch 1-3: add main runtime PM support for cdns3 core and imx glue layer
Patch 4-9: add platform data support and two quirks for xhci-plat.c.
- .suspend_quirk for platform special sequence between xhci_bus_suspend
and xhci_suspend.
- add XHCI_SKIP_PHY_INIT quirk for skip PHY management from HCD core.

Changes for v4:
- Address Jun Li's comments for cdns3 core changes [Patch 2]
- Some small fixes for cdns3-imx for CLK_125_REQ bit
- Rebase the latest usb-next

Changes for v3:
Add Jun Li’s reviewed-by [Patch 1 and Patch 6]
Add Mathias’s acked-by [Patch 4-6]
Some wakeup logic improvement [Patch 2]
Add dedicated wakeup interrupt for core, and improve the commit log [Patch]
Fix build error found by kbuild test robot [Patch 3]
Using xhci_plat_priv quirk for skip PHY initialization [patch 7, patch 9]
Some other typo and tiny improvements

Changes for v2:
- Add the 1st patch. Without it, the build on the usb-next will fail.
- Change the subject for cover letter a little to reflect all contents.

Peter Chen (9):
  usb: cdns3: introduce cdns3_set_phy_power API
  usb: cdns3: add runtime PM support
  usb: cdns3: imx: add glue layer runtime pm implementation
  usb: host: xhci-plat: add platform data support
  usb: host: xhci-plat: add .suspend_quirk for struct xhci_plat_priv
  usb: host: xhci-plat: delete the unnecessary code
  usb: host: xhci-plat: add priv quirk for skip PHY initialization
  usb: cdns3: host: add .suspend_quirk for xhci-plat.c
  usb: cdns3: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT

 drivers/usb/cdns3/cdns3-imx.c   | 203 ++++++++++++++++++++++++++++++--
 drivers/usb/cdns3/core.c        | 197 ++++++++++++++++++++++++++-----
 drivers/usb/cdns3/core.h        |  16 +++
 drivers/usb/cdns3/drd.c         |   3 +
 drivers/usb/cdns3/gadget.c      |   4 +
 drivers/usb/cdns3/host-export.h |   6 +
 drivers/usb/cdns3/host.c        |  48 ++++++++
 drivers/usb/host/xhci-plat.c    |  36 +++++-
 drivers/usb/host/xhci-plat.h    |   1 +
 drivers/usb/host/xhci.h         |   1 +
 10 files changed, 467 insertions(+), 48 deletions(-)

-- 
2.17.1


             reply	other threads:[~2020-07-03  6:26 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03  6:26 Peter Chen [this message]
2020-07-03  6:26 ` [PATCH v4 1/9] usb: cdns3: introduce cdns3_set_phy_power API Peter Chen
2020-07-03  7:00   ` Greg KH
2020-07-03  7:16     ` Peter Chen
2020-07-03  7:23       ` Greg KH
2020-07-03  7:31         ` Peter Chen
2020-09-07  7:29     ` Felipe Balbi
2020-07-03  6:26 ` [PATCH v4 2/9] usb: cdns3: add runtime PM support Peter Chen
2020-07-03  6:26 ` [PATCH v4 3/9] usb: cdns3: imx: add glue layer runtime pm implementation Peter Chen
2020-07-05  7:07   ` kernel test robot
2020-07-03  6:26 ` [PATCH v4 4/9] usb: host: xhci-plat: add platform data support Peter Chen
2020-07-03  6:26 ` [PATCH v4 5/9] usb: host: xhci-plat: add .suspend_quirk for struct xhci_plat_priv Peter Chen
2020-07-03  6:26 ` [PATCH v4 6/9] usb: host: xhci-plat: delete the unnecessary code Peter Chen
2020-07-03  6:26 ` [PATCH v4 7/9] usb: host: xhci-plat: add priv quirk for skip PHY initialization Peter Chen
2020-07-03  6:26 ` [PATCH v4 8/9] usb: cdns3: host: add .suspend_quirk for xhci-plat.c Peter Chen
2020-07-03  6:26 ` [PATCH v4 9/9] usb: cdns3: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT Peter Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200703062653.29159-1-peter.chen@nxp.com \
    --to=peter.chen@nxp.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jun.li@nxp.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=pawell@cadence.com \
    --cc=rogerq@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).