From: Matthias Kaehlcke <mka@chromium.org>
To: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Felipe Balbi <balbi@kernel.org>,
Stephen Boyd <swboyd@chromium.org>,
Doug Anderson <dianders@chromium.org>,
linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Manu Gautam <mgautam@codeaurora.org>
Subject: Re: [PATCH v2 2/3] usb: dwc3: qcom: Configure wakeup interrupts and set genpd active wakeup flag
Date: Tue, 21 Jul 2020 15:55:57 -0700 [thread overview]
Message-ID: <20200721225557.GX3191083@google.com> (raw)
In-Reply-To: <1594235417-23066-3-git-send-email-sanm@codeaurora.org>
Hi Sandeep,
On Thu, Jul 09, 2020 at 12:40:16AM +0530, Sandeep Maheswaram wrote:
> configure interrupts based on hs_phy_flag. Set genpd active wakeup flag
> for usb gdsc if wakeup capable devices are connected.
as Stephen remarked, please describe why this patch is doing what
it is doing.
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 73 ++++++++++++++++++++++++++++++++++----------
> 1 file changed, 57 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 1dfd024..8902670 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -16,9 +16,11 @@
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> #include <linux/phy/phy.h>
> +#include <linux/pm_domain.h>
> #include <linux/usb/of.h>
> #include <linux/reset.h>
> #include <linux/iopoll.h>
> +#include <linux/usb/hcd.h>
>
> #include "core.h"
>
> @@ -192,21 +194,34 @@ static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom)
>
> static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
> {
> + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
> +
> if (qcom->hs_phy_irq) {
> disable_irq_wake(qcom->hs_phy_irq);
> disable_irq_nosync(qcom->hs_phy_irq);
> }
nit: add empty line
> + if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_LS) {
> + if (qcom->dp_hs_phy_irq) {
> + disable_irq_wake(qcom->dp_hs_phy_irq);
> + disable_irq_nosync(qcom->dp_hs_phy_irq);
> + }
> + } else if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_HS) {
> + if (qcom->dm_hs_phy_irq) {
> + disable_irq_wake(qcom->dm_hs_phy_irq);
> + disable_irq_nosync(qcom->dm_hs_phy_irq);
> + }
> + } else {
>
delete empty line
> - if (qcom->dp_hs_phy_irq) {
> - disable_irq_wake(qcom->dp_hs_phy_irq);
> - disable_irq_nosync(qcom->dp_hs_phy_irq);
> - }
> + if (qcom->dp_hs_phy_irq) {
> + disable_irq_wake(qcom->dp_hs_phy_irq);
> + disable_irq_nosync(qcom->dp_hs_phy_irq);
> + }
>
> - if (qcom->dm_hs_phy_irq) {
> - disable_irq_wake(qcom->dm_hs_phy_irq);
> - disable_irq_nosync(qcom->dm_hs_phy_irq);
> + if (qcom->dm_hs_phy_irq) {
> + disable_irq_wake(qcom->dm_hs_phy_irq);
> + disable_irq_nosync(qcom->dm_hs_phy_irq);
> + }
> }
> -
> if (qcom->ss_phy_irq) {
> disable_irq_wake(qcom->ss_phy_irq);
> disable_irq_nosync(qcom->ss_phy_irq);
> @@ -215,21 +230,34 @@ static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
>
> static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> {
> + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
> +
> if (qcom->hs_phy_irq) {
> enable_irq(qcom->hs_phy_irq);
> enable_irq_wake(qcom->hs_phy_irq);
> }
nit: add empty line
> + if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_LS) {
> + if (qcom->dp_hs_phy_irq) {
> + enable_irq(qcom->dp_hs_phy_irq);
> + enable_irq_wake(qcom->dp_hs_phy_irq);
> + }
> + } else if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_HS) {
> + if (qcom->dm_hs_phy_irq) {
> + enable_irq(qcom->dm_hs_phy_irq);
> + enable_irq_wake(qcom->dm_hs_phy_irq);
> + }
> + } else {
>
delete empty line
> - if (qcom->dp_hs_phy_irq) {
> - enable_irq(qcom->dp_hs_phy_irq);
> - enable_irq_wake(qcom->dp_hs_phy_irq);
> - }
> + if (qcom->dp_hs_phy_irq) {
> + enable_irq(qcom->dp_hs_phy_irq);
> + enable_irq_wake(qcom->dp_hs_phy_irq);
> + }
>
> - if (qcom->dm_hs_phy_irq) {
> - enable_irq(qcom->dm_hs_phy_irq);
> - enable_irq_wake(qcom->dm_hs_phy_irq);
> + if (qcom->dm_hs_phy_irq) {
> + enable_irq(qcom->dm_hs_phy_irq);
> + enable_irq_wake(qcom->dm_hs_phy_irq);
> + }
> }
> -
> if (qcom->ss_phy_irq) {
> enable_irq(qcom->ss_phy_irq);
> enable_irq_wake(qcom->ss_phy_irq);
> @@ -240,6 +268,14 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
> {
> u32 val;
> int i;
> + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
> + struct usb_hcd *hcd = platform_get_drvdata(dwc->xhci);
> + struct generic_pm_domain *genpd;
> +
> + genpd = pd_to_genpd(qcom->dev->pm_domain);
nit: assign in declaration?
> +
> + if (genpd && usb_wakeup_enabled_descendants(hcd->self.root_hub))
> + genpd->flags |= GENPD_FLAG_ACTIVE_WAKEUP;
>
> if (qcom->is_suspended)
> return 0;
> @@ -261,6 +297,11 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
> {
> int ret;
> int i;
> + struct generic_pm_domain *genpd;
> +
> + genpd = pd_to_genpd(qcom->dev->pm_domain);
> + if (genpd)
> + genpd->flags &= !GENPD_FLAG_ACTIVE_WAKEUP;
~GENPD_FLAG_ACTIVE_WAKEUP; ?
next prev parent reply other threads:[~2020-07-21 22:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-08 19:10 [PATCH v2 0/3] usb: dwc3: Host wake up support from system suspend Sandeep Maheswaram
2020-07-08 19:10 ` [PATCH v2 1/3] usb: dwc3: core: " Sandeep Maheswaram
2020-07-21 21:36 ` Matthias Kaehlcke
2020-08-13 15:49 ` Matthias Kaehlcke
2020-07-08 19:10 ` [PATCH v2 2/3] usb: dwc3: qcom: Configure wakeup interrupts and set genpd active wakeup flag Sandeep Maheswaram
2020-07-10 6:12 ` Stephen Boyd
2020-07-21 22:55 ` Matthias Kaehlcke [this message]
2020-07-08 19:10 ` [PATCH v2 3/3] arm64: dts: qcom: sc7180: Use pdc interrupts for USB instead of GIC interrupts Sandeep Maheswaram
2020-07-10 6:17 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200721225557.GX3191083@google.com \
--to=mka@chromium.org \
--cc=agross@kernel.org \
--cc=balbi@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mgautam@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=sanm@codeaurora.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).