From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 09/27] xhci: dbc: Don't use xhci_write_64() as it takes xhci as a parameter
Date: Thu, 23 Jul 2020 17:45:12 +0300 [thread overview]
Message-ID: <20200723144530.9992-10-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20200723144530.9992-1-mathias.nyman@linux.intel.com>
xhci_write_64() is essentially a wrapper for lo_hi_writeq(), but it
requires struct xhci_hcd * as a parameter.
Use lo_hi_writeq() directly instead
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-dbgcap.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index 3375be7ea642..3541fbbfc28b 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -101,7 +101,7 @@ static void xhci_dbc_init_contexts(struct xhci_hcd *xhci, u32 string_length)
ep_ctx->deq = cpu_to_le64(deq | dbc->ring_in->cycle_state);
/* Set DbC context and info registers: */
- xhci_write_64(xhci, dbc->ctx->dma, &dbc->regs->dccp);
+ lo_hi_writeq(dbc->ctx->dma, &dbc->regs->dccp);
dev_info = cpu_to_le32((DBC_VENDOR_ID << 16) | DBC_PROTOCOL);
writel(dev_info, &dbc->regs->devinfo1);
@@ -413,10 +413,11 @@ static int xhci_dbc_mem_init(struct xhci_hcd *xhci, gfp_t flags)
/* Setup ERST register: */
writel(dbc->erst.erst_size, &dbc->regs->ersts);
- xhci_write_64(xhci, dbc->erst.erst_dma_addr, &dbc->regs->erstba);
+
+ lo_hi_writeq(dbc->erst.erst_dma_addr, &dbc->regs->erstba);
deq = xhci_trb_virt_to_dma(dbc->ring_evt->deq_seg,
dbc->ring_evt->dequeue);
- xhci_write_64(xhci, deq, &dbc->regs->erdp);
+ lo_hi_writeq(deq, &dbc->regs->erdp);
/* Setup strings and contexts: */
string_length = xhci_dbc_populate_strings(dbc->string);
@@ -788,7 +789,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
if (update_erdp) {
deq = xhci_trb_virt_to_dma(dbc->ring_evt->deq_seg,
dbc->ring_evt->dequeue);
- xhci_write_64(xhci, deq, &dbc->regs->erdp);
+ lo_hi_writeq(deq, &dbc->regs->erdp);
}
return EVT_DONE;
--
2.17.1
next prev parent reply other threads:[~2020-07-23 14:42 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-23 14:45 [PATCH 00/27] xhci features for usb-next Mathias Nyman
2020-07-23 14:45 ` [PATCH 01/27] xhci: Make debug message consistent with bus and port number Mathias Nyman
2020-07-23 14:45 ` [PATCH 02/27] xhci: dbc: Don't use generic xhci inc_deq() function for dbc Mathias Nyman
2020-07-23 14:45 ` [PATCH 03/27] xhci: Don't pass struct xhci_hcd pointer to xhci_link_seg() Mathias Nyman
2020-07-23 14:45 ` [PATCH 04/27] xhci: dbc: Don't use generic xhci erst allocation and free functions Mathias Nyman
2020-07-23 14:45 ` [PATCH 05/27] xhci: dbc: Remove dbc_dma_alloc_coherent() wrapper Mathias Nyman
2020-07-23 14:45 ` [PATCH 06/27] xhci: dbc: Remove dbc_dma_free_coherent() wrapper Mathias Nyman
2020-07-23 14:45 ` [PATCH 07/27] xhci: dbc: Add device pointer to dbc structure Mathias Nyman
2020-07-23 14:45 ` [PATCH 08/27] xhci: dbc: Use dev_info() and similar instead of xhci_info() Mathias Nyman
2020-07-23 14:45 ` Mathias Nyman [this message]
2020-07-23 14:45 ` [PATCH 10/27] xhci: dbc: Don't pass the xhci pointer as a parameter to xhci_dbc_init_context() Mathias Nyman
2020-07-23 14:45 ` [PATCH 11/27] xhci: dbc: Get the device pointer from dbc structure in dbc_ep_do_queue() Mathias Nyman
2020-07-23 14:45 ` [PATCH 12/27] xhci: dbc: Pass dbc pointer to endpoint init and exit functions Mathias Nyman
2020-07-23 14:45 ` [PATCH 13/27] xhci: dbc: Change to pass dbc pointer to xhci_do_dbc_stop() Mathias Nyman
2020-07-23 14:45 ` [PATCH 14/27] xhci: dbc: Pass dbc pointer to dbc_handle_xfer_event() instead of xhci_hcd pointer Mathias Nyman
2020-07-23 14:45 ` [PATCH 15/27] xhci: dbgtty: Pass dbc pointer when registering a dbctty device Mathias Nyman
2020-07-23 14:45 ` [PATCH 16/27] xhci: dbc: Pass dbc pointer to get_in/out_ep() helper functions to get endpoints Mathias Nyman
2020-07-23 14:45 ` [PATCH 17/27] xhci: dbc: Use dbc structure in the request completion instead of xhci_hcd Mathias Nyman
2020-07-23 14:45 ` [PATCH 18/27] xhci: dbc: Don't use generic xhci context allocation for dbc Mathias Nyman
2020-07-23 14:45 ` [PATCH 19/27] xhci: dbc: don't use generic xhci ring allocation functions " Mathias Nyman
2020-07-23 14:45 ` [PATCH 20/27] xhci: dbc: Pass dbc pointer to dbc memory init and cleanup functions Mathias Nyman
2020-07-23 14:45 ` [PATCH 21/27] xhci: dbc: Pass dbc pointer to dbc start and stop functions Mathias Nyman
2020-07-23 14:45 ` [PATCH 22/27] xhci: dbc: simplify dbc requests allocation and queueing Mathias Nyman
2020-07-23 14:45 ` [PATCH 23/27] xhci: dbc: remove endpoint pointers from dbc_port structure Mathias Nyman
2020-07-23 14:45 ` [PATCH 24/27] xhci: dbctty: split dbc tty driver registration and unregistration functions Mathias Nyman
2020-07-23 14:45 ` [PATCH 25/27] xhci: dbc: Add a operations structure to access driver functions Mathias Nyman
2020-07-23 14:45 ` [PATCH 26/27] xhci: dbgcap: remove dbc dependency on dbctty specific flag Mathias Nyman
2020-07-23 14:45 ` [PATCH 27/27] xhci: dbc: remove tty specific port structure from struct xhci_dbc Mathias Nyman
2020-07-23 15:04 ` [PATCH 00/27] xhci features for usb-next Greg KH
2020-07-23 18:47 ` Mathias Nyman
2020-07-24 7:06 ` Greg KH
2020-07-24 11:11 ` Mathias Nyman
2020-07-24 16:32 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200723144530.9992-10-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).