From: Peter Chen <peter.chen@nxp.com>
To: mathias.nyman@intel.com
Cc: linux-usb@vger.kernel.org, gregkh@linuxfoundation.org,
linux-imx@nxp.com, Peter Chen <peter.chen@nxp.com>
Subject: [PATCH v2 4/7] usb: host: xhci-plat: add priv quirk for skip PHY initialization
Date: Mon, 17 Aug 2020 17:44:37 +0800 [thread overview]
Message-ID: <20200817094440.23202-5-peter.chen@nxp.com> (raw)
In-Reply-To: <20200817094440.23202-1-peter.chen@nxp.com>
Some DRD controllers (eg, dwc3 & cdns3) have PHY management at
their own driver to cover both device and host mode, so add one
priv quirk for such users to skip PHY management from HCD core.
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
drivers/usb/host/xhci-plat.c | 8 ++++++--
drivers/usb/host/xhci.h | 1 +
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 07ca000a0084..14ff65a387e8 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -183,6 +183,8 @@ static int xhci_plat_probe(struct platform_device *pdev)
struct usb_hcd *hcd;
int ret;
int irq;
+ struct xhci_plat_priv *priv = NULL;
+
if (usb_disabled())
return -ENODEV;
@@ -280,8 +282,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
priv_match = dev_get_platdata(&pdev->dev);
if (priv_match) {
- struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
-
+ priv = hcd_to_xhci_priv(hcd);
/* Just copy data for now */
*priv = *priv_match;
}
@@ -329,6 +330,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
xhci->shared_hcd->tpl_support = hcd->tpl_support;
+ if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
+ hcd->skip_phy_initialization = 1;
+
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto disable_usb_phy;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ea1754f185a2..7658abdfca28 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1874,6 +1874,7 @@ struct xhci_hcd {
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)
+#define XHCI_SKIP_PHY_INIT BIT_ULL(37)
unsigned int num_active_eps;
unsigned int limit_active_eps;
--
2.17.1
next prev parent reply other threads:[~2020-08-17 9:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-17 9:44 [PATCH v2 0/7] usb: host: xhci: some changes for xhci-plat.c Peter Chen
2020-08-17 9:44 ` [PATCH v2 1/7] usb: host: xhci-plat: add platform data support Peter Chen
2020-08-17 9:44 ` [PATCH v2 2/7] usb: host: xhci-plat: add .suspend_quirk for struct xhci_plat_priv Peter Chen
2020-08-17 9:44 ` [PATCH v2 3/7] usb: host: xhci-plat: delete the unnecessary code Peter Chen
2020-08-17 9:44 ` Peter Chen [this message]
2020-08-17 9:44 ` [PATCH v2 5/7] usb: host: xhci-plat: add wakeup entry at sysfs Peter Chen
2020-08-21 9:37 ` Mathias Nyman
2020-08-21 9:57 ` Peter Chen
2020-08-21 10:35 ` Mathias Nyman
2020-09-17 17:49 ` Matthias Kaehlcke
2020-08-17 9:44 ` [PATCH v2 6/7] usb: host: xhci-plat: improve the comments for xhci_plat_suspend Peter Chen
2020-08-17 9:44 ` [PATCH v2 7/7] usb: host: xhci: avoid calling contineous two times for xhci_suspend Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200817094440.23202-5-peter.chen@nxp.com \
--to=peter.chen@nxp.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).