linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Chen <peter.chen@nxp.com>
To: balbi@kernel.org
Cc: linux-usb@vger.kernel.org, linux-imx@nxp.com, pawell@cadence.com,
	rogerq@ti.com, gregkh@linuxfoundation.org, jun.li@nxp.com,
	Peter Chen <peter.chen@nxp.com>
Subject: [PATCH v7 1/3] usb: cdns3: introduce set_phy_power_on{off} APIs
Date: Tue, 25 Aug 2020 10:11:18 +0800	[thread overview]
Message-ID: <20200825021120.4926-2-peter.chen@nxp.com> (raw)
In-Reply-To: <20200825021120.4926-1-peter.chen@nxp.com>

Since we have both USB2 and USB3 PHYs for cdns3 controller, it is
better we have unity APIs to handle both USB2 and USB3's power, it
could simplify code for error handling and further power management
implementation.

Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
 drivers/usb/cdns3/core.c | 43 ++++++++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
index 5c1586ec7824..e56dbb6a898c 100644
--- a/drivers/usb/cdns3/core.c
+++ b/drivers/usb/cdns3/core.c
@@ -371,6 +371,27 @@ static int cdns3_role_set(struct usb_role_switch *sw, enum usb_role role)
 	return ret;
 }
 
+static int set_phy_power_on(struct cdns3 *cdns)
+{
+	int ret;
+
+	ret = phy_power_on(cdns->usb2_phy);
+	if (ret)
+		return ret;
+
+	ret = phy_power_on(cdns->usb3_phy);
+	if (ret)
+		phy_power_off(cdns->usb2_phy);
+
+	return ret;
+}
+
+static void set_phy_power_off(struct cdns3 *cdns)
+{
+	phy_power_off(cdns->usb3_phy);
+	phy_power_off(cdns->usb2_phy);
+}
+
 /**
  * cdns3_probe - probe for cdns3 core device
  * @pdev: Pointer to cdns3 core platform device
@@ -463,14 +484,10 @@ static int cdns3_probe(struct platform_device *pdev)
 	if (ret)
 		goto err1;
 
-	ret = phy_power_on(cdns->usb2_phy);
+	ret = set_phy_power_on(cdns);
 	if (ret)
 		goto err2;
 
-	ret = phy_power_on(cdns->usb3_phy);
-	if (ret)
-		goto err3;
-
 	sw_desc.set = cdns3_role_set;
 	sw_desc.get = cdns3_role_get;
 	sw_desc.allow_userspace_control = true;
@@ -482,16 +499,16 @@ static int cdns3_probe(struct platform_device *pdev)
 	if (IS_ERR(cdns->role_sw)) {
 		ret = PTR_ERR(cdns->role_sw);
 		dev_warn(dev, "Unable to register Role Switch\n");
-		goto err4;
+		goto err3;
 	}
 
 	ret = cdns3_drd_init(cdns);
 	if (ret)
-		goto err5;
+		goto err4;
 
 	ret = cdns3_core_init_role(cdns);
 	if (ret)
-		goto err5;
+		goto err4;
 
 	device_set_wakeup_capable(dev, true);
 	pm_runtime_set_active(dev);
@@ -508,14 +525,11 @@ static int cdns3_probe(struct platform_device *pdev)
 	dev_dbg(dev, "Cadence USB3 core: probe succeed\n");
 
 	return 0;
-err5:
+err4:
 	cdns3_drd_exit(cdns);
 	usb_role_switch_unregister(cdns->role_sw);
-err4:
-	phy_power_off(cdns->usb3_phy);
-
 err3:
-	phy_power_off(cdns->usb2_phy);
+	set_phy_power_off(cdns);
 err2:
 	phy_exit(cdns->usb3_phy);
 err1:
@@ -539,8 +553,7 @@ static int cdns3_remove(struct platform_device *pdev)
 	pm_runtime_put_noidle(&pdev->dev);
 	cdns3_exit_roles(cdns);
 	usb_role_switch_unregister(cdns->role_sw);
-	phy_power_off(cdns->usb2_phy);
-	phy_power_off(cdns->usb3_phy);
+	set_phy_power_off(cdns);
 	phy_exit(cdns->usb2_phy);
 	phy_exit(cdns->usb3_phy);
 	return 0;
-- 
2.17.1


  reply	other threads:[~2020-08-25  2:13 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-25  2:11 [PATCH v7 0/3] usb: cdns3: add runtime pm support Peter Chen
2020-08-25  2:11 ` Peter Chen [this message]
2020-08-27 13:09   ` [PATCH v7 1/3] usb: cdns3: introduce set_phy_power_on{off} APIs Felipe Balbi
2020-08-28  0:33     ` Peter Chen
2020-08-25  2:11 ` [PATCH v7 2/3] usb: cdns3: add runtime PM support Peter Chen
2020-08-27 13:16   ` Felipe Balbi
2020-08-28  1:01     ` Peter Chen
2020-08-25  2:11 ` [PATCH v7 3/3] usb: cdns3: imx: add glue layer runtime pm implementation Peter Chen
2020-08-27 13:20   ` Felipe Balbi
2020-08-28  1:17     ` Peter Chen
2020-09-02  9:49       ` Peter Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200825021120.4926-2-peter.chen@nxp.com \
    --to=peter.chen@nxp.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jun.li@nxp.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=pawell@cadence.com \
    --cc=rogerq@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).