From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Badhri Jagan Sridharan <badhri@google.com>
Cc: Guenter Roeck <linux@roeck-us.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 00/14] TCPM support for FRS and AutoDischarge Disconnect
Date: Tue, 15 Sep 2020 15:09:27 +0300 [thread overview]
Message-ID: <20200915120927.GA1139641@kuha.fi.intel.com> (raw)
In-Reply-To: <20200901025927.3596190-1-badhri@google.com>
On Mon, Aug 31, 2020 at 07:59:13PM -0700, Badhri Jagan Sridharan wrote:
> First of all apologies for mixing up the patch version as noted by
> Heikki and Greg. All of them were v1's but since I was manually adding
> the version numbers I mixed them up. Using the --reroll-count option
> now. Updating the patch version to v6 (highest version number in the
> previous patchset + 1) to avoid confusion.
If this is v6, then where are v2 - v5? And what changed? Why didn't
you just make this v2?
> I also rebased on to off of the recent usb-next tip:
> 5fedf0d295d3 (origin/usb-testing, origin/usb-next) Merge 5.9-rc3 into usb-next
> Which had the following changes causing merge conflict:
> 3ed8e1c2ac99 usb: typec: tcpm: Migrate workqueue to RT priority for processing events
> 6bbe2a90a0bb usb: typec: tcpm: During PR_SWAP, source caps should be sent only after tSwapSourceStart
>
> Addressed comments from Heikki and Randy which have described in the
> individual commit's change history as well.
>
> Badhri Jagan Sridharan (14):
> usb: typec: tcpci: Add register definitions to tcpci
> usb: typec: tcpci: Add support when hidden tx registers are
> inaccessible
> usb: typec: tcpci: update ROLE_CONTROL for DRP
> usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
> usb: typec: tcpci: Add set_vbus tcpci callback
> dt-bindings: usb: Maxim type-c controller device tree binding document
> usb: typec: tcpci_maxim: Chip level TCPC driver
> dt-bindings: connector: Add property to set initial current cap for
> FRS
> usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
> usb: typec: tcpci: Implement callbacks for FRS
> usb: typec: tcpci_maxim: Add support for Sink FRS
> usb: typec: tcpm: Implement enabling Auto Discharge disconnect support
> usb: typec: tcpci: Implement Auto discharge disconnect callbacks
> usb: typec: tcpci_maxim: Implemnent set_auto_vbus_discharge_threshold
>
> .../bindings/connector/usb-connector.txt | 128 ++++
> .../devicetree/bindings/usb/maxim,tcpci.txt | 44 ++
> drivers/usb/typec/tcpm/Kconfig | 5 +
> drivers/usb/typec/tcpm/Makefile | 13 +-
> drivers/usb/typec/tcpm/tcpci.c | 146 ++++-
> drivers/usb/typec/tcpm/tcpci.h | 43 ++
> drivers/usb/typec/tcpm/tcpci_maxim.c | 564 ++++++++++++++++++
> drivers/usb/typec/tcpm/tcpm.c | 291 ++++++++-
> include/dt-bindings/usb/pd.h | 10 +
> include/linux/usb/pd.h | 19 +-
> include/linux/usb/tcpm.h | 24 +-
> include/linux/usb/typec.h | 13 +
> 12 files changed, 1266 insertions(+), 34 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/connector/usb-connector.txt
> create mode 100644 Documentation/devicetree/bindings/usb/maxim,tcpci.txt
> create mode 100644 drivers/usb/typec/tcpm/tcpci_maxim.c
>
>
> base-commit: 5fedf0d295d3ef69fd85fdee4cb68fd3756b54c2
> --
> 2.28.0.402.g5ffc5be6b7-goog
--
heikki
next prev parent reply other threads:[~2020-09-15 12:10 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-01 2:59 [PATCH v6 00/14] TCPM support for FRS and AutoDischarge Disconnect Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 01/14] usb: typec: tcpci: Add register definitions to tcpci Badhri Jagan Sridharan
2020-09-15 12:10 ` Heikki Krogerus
2020-09-01 2:59 ` [PATCH v6 02/14] usb: typec: tcpci: Add support when hidden tx registers are inaccessible Badhri Jagan Sridharan
2020-09-15 12:11 ` Heikki Krogerus
2020-09-01 2:59 ` [PATCH v6 03/14] usb: typec: tcpci: update ROLE_CONTROL for DRP Badhri Jagan Sridharan
2020-09-15 12:12 ` Heikki Krogerus
2020-09-01 2:59 ` [PATCH v6 04/14] usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference Badhri Jagan Sridharan
2020-09-15 12:16 ` Heikki Krogerus
2020-09-01 2:59 ` [PATCH v6 05/14] usb: typec: tcpci: Add set_vbus tcpci callback Badhri Jagan Sridharan
2020-09-15 12:22 ` Heikki Krogerus
2020-09-16 9:07 ` Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 06/14] dt-bindings: usb: Maxim type-c controller device tree binding document Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 07/14] usb: typec: tcpci_maxim: Chip level TCPC driver Badhri Jagan Sridharan
2020-09-15 12:43 ` Heikki Krogerus
2020-09-16 9:34 ` Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 08/14] dt-bindings: connector: Add property to set initial current cap for FRS Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 09/14] usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS) Badhri Jagan Sridharan
2020-09-15 13:20 ` Heikki Krogerus
2020-09-17 10:23 ` Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 10/14] usb: typec: tcpci: Implement callbacks for FRS Badhri Jagan Sridharan
2020-09-15 13:23 ` Heikki Krogerus
2020-09-01 2:59 ` [PATCH v6 11/14] usb: typec: tcpci_maxim: Add support for Sink FRS Badhri Jagan Sridharan
2020-09-15 13:25 ` Heikki Krogerus
2020-09-01 2:59 ` [PATCH v6 12/14] usb: typec: tcpm: Implement enabling Auto Discharge disconnect support Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 13/14] usb: typec: tcpci: Implement Auto discharge disconnect callbacks Badhri Jagan Sridharan
2020-09-01 2:59 ` [PATCH v6 14/14] usb: typec: tcpci_maxim: Implemnent set_auto_vbus_discharge_threshold Badhri Jagan Sridharan
2020-09-15 12:09 ` Heikki Krogerus [this message]
2020-09-15 16:57 ` [PATCH v6 00/14] TCPM support for FRS and AutoDischarge Disconnect Badhri Jagan Sridharan
2020-09-15 13:33 ` Heikki Krogerus
2020-09-15 16:59 ` Badhri Jagan Sridharan
2020-09-16 11:05 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200915120927.GA1139641@kuha.fi.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=badhri@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).