[PATCH AUTOSEL 4.19 023/206] USB: serial: mos7840: fix probe error handling

[PATCH AUTOSEL 4.19 023/206] USB: serial: mos7840: fix probe error handling

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 960fbd1ca584a5b4cd818255769769d42bfc6dbe ]

The driver would return success and leave the port structures
half-initialised if any of the register accesses during probe fails.

This would specifically leave the port control urb unallocated,
something which could trigger a NULL pointer dereference on interrupt
events.

Fortunately the interrupt implementation is completely broken and has
never even been enabled...

Note that the zero-length-enable register write used to set the zle-flag
for all ports is moved to attach.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/serial/mos7840.c | 48 +++++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 20 deletions(-)

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 4a7bd26841af0..45f1e0e772494 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2119,6 +2119,23 @@ static int mos7840_calc_num_ports(struct usb_serial *serial,
 	return num_ports;
 }
 
+static int mos7840_attach(struct usb_serial *serial)
+{
+	struct device *dev = &serial->interface->dev;
+	int status;
+	u16 val;
+
+	/* Zero Length flag enable */
+	val = 0x0f;
+	status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, val);
+	if (status < 0)
+		dev_dbg(dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
+	else
+		dev_dbg(dev, "ZLP_REG5 Writing success status%d\n", status);
+
+	return status;
+}
+
 static int mos7840_port_probe(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
@@ -2182,7 +2199,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 			mos7840_port->ControlRegOffset, &Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status);
-		goto out;
+		goto error;
 	} else
 		dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
 	Data |= 0x08;	/* setting driver done bit */
@@ -2194,7 +2211,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 			mos7840_port->ControlRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
-		goto out;
+		goto error;
 	} else
 		dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
 
@@ -2205,7 +2222,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 			(__u16) (mos7840_port->DcrRegOffset + 0), Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status);
-		goto out;
+		goto error;
 	} else
 		dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status);
 
@@ -2214,7 +2231,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 			(__u16) (mos7840_port->DcrRegOffset + 1), Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status);
-		goto out;
+		goto error;
 	} else
 		dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status);
 
@@ -2223,7 +2240,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 			(__u16) (mos7840_port->DcrRegOffset + 2), Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status);
-		goto out;
+		goto error;
 	} else
 		dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status);
 
@@ -2232,7 +2249,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 	status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
-		goto out;
+		goto error;
 	} else
 		dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
 
@@ -2249,7 +2266,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 	status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
-		goto out;
+		goto error;
 	} else
 		dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
 
@@ -2263,7 +2280,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 				(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
 		if (status < 0) {
 			dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status);
-			goto out;
+			goto error;
 		} else
 			dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status);
 	} else {
@@ -2275,7 +2292,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 				(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
 		if (status < 0) {
 			dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status);
-			goto out;
+			goto error;
 		} else
 			dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);
 
@@ -2315,17 +2332,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 		/* Turn off LED */
 		mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
 	}
-out:
-	if (pnum == serial->num_ports - 1) {
-		/* Zero Length flag enable */
-		Data = 0x0f;
-		status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
-		if (status < 0) {
-			dev_dbg(&port->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
-			goto error;
-		} else
-			dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status);
-	}
+
 	return 0;
 error:
 	kfree(mos7840_port->led_dr);
@@ -2381,6 +2388,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.unthrottle = mos7840_unthrottle,
 	.calc_num_ports = mos7840_calc_num_ports,
 	.probe = mos7840_probe,
+	.attach = mos7840_attach,
 	.ioctl = mos7840_ioctl,
 	.set_termios = mos7840_set_termios,
 	.break_ctl = mos7840_break,
-- 
2.25.1

[PATCH AUTOSEL 4.19 161/206] USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()

[Sasha Levin]

From: Tang Bin <tangbin@cmss.chinamobile.com>

[ Upstream commit c856b4b0fdb5044bca4c0acf9a66f3b5cc01a37a ]

If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
mv_ehci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200508114305.15740-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/ehci-mv.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index de764459e05a6..4edcd7536a01b 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -193,9 +193,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	hcd->regs = ehci_mv->op_regs;
 
 	hcd->irq = platform_get_irq(pdev, 0);
-	if (!hcd->irq) {
-		dev_err(&pdev->dev, "Cannot get irq.");
-		retval = -ENODEV;
+	if (hcd->irq < 0) {
+		retval = hcd->irq;
 		goto err_disable_clk;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 167/206] USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit a7f40c233a6b0540d28743267560df9cfb571ca9 ]

The comparison of hcd->irq to less than zero for an error check will
never be true because hcd->irq is an unsigned int.  Fix this by
assigning the int retval to the return of platform_get_irq and checking
this for the -ve error condition and assigning hcd->irq to retval.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: c856b4b0fdb5 ("USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200515165453.104028-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/ehci-mv.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 4edcd7536a01b..9d93e7441bbca 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -192,11 +192,10 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	hcd->rsrc_len = resource_size(r);
 	hcd->regs = ehci_mv->op_regs;
 
-	hcd->irq = platform_get_irq(pdev, 0);
-	if (hcd->irq < 0) {
-		retval = hcd->irq;
+	retval = platform_get_irq(pdev, 0);
+	if (retval < 0)
 		goto err_disable_clk;
-	}
+	hcd->irq = retval;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs;
-- 
2.25.1

[PATCH AUTOSEL 4.19 175/206] usb: dwc3: Increase timeout for CmdAct cleared by device controller

[Sasha Levin]

From: Yu Chen <chenyu56@huawei.com>

[ Upstream commit 1c0e69ae1b9f9004fd72978612ae3463791edc56 ]

If the SS PHY is in P3, there is no pipe_clk, HW may use suspend_clk
for function, as suspend_clk is slow so EP command need more time to
complete, e.g, imx8M suspend_clk is 32K, set ep configuration will
take about 380us per below trace time stamp(44.286278 - 44.285897
= 0.000381):

configfs_acm.sh-822   [000] d..1    44.285896: dwc3_writel: addr
000000006d59aae1 value 00000401
configfs_acm.sh-822   [000] d..1    44.285897: dwc3_readl: addr
000000006d59aae1 value 00000401
... ...
configfs_acm.sh-822   [000] d..1    44.286278: dwc3_readl: addr
000000006d59aae1 value 00000001
configfs_acm.sh-822   [000] d..1    44.286279: dwc3_gadget_ep_cmd:
ep0out: cmd 'Set Endpoint Configuration' [401] params 00001000
00000500 00000000 --> status: Successful

This was originally found on Hisilicon Kirin Soc that need more time
for the device controller to clear the CmdAct of DEPCMD.

Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 7bf2573dd459e..37cc3fd7c3cad 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -270,7 +270,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
 {
 	const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
 	struct dwc3		*dwc = dep->dwc;
-	u32			timeout = 1000;
+	u32			timeout = 5000;
 	u32			saved_config = 0;
 	u32			reg;
 
-- 
2.25.1