From: Johan Hovold <johan@kernel.org>
To: Oliver Neukum <oneukum@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org,
Daniel Caujolle-Bert <f1rmb.daniel@gmail.com>,
Johan Hovold <johan@kernel.org>
Subject: [RFC 4/4] USB: cdc-acm: clean up handling of quirky devices
Date: Mon, 21 Sep 2020 13:35:25 +0200 [thread overview]
Message-ID: <20200921113525.32187-5-johan@kernel.org> (raw)
In-Reply-To: <20200921113525.32187-1-johan@kernel.org>
Instead of falling back to "combined-interface" probing when detecting
broken union and call-management descriptors, assume all interfaces with
three endpoints are of "combined-interface" type.
This allows for the removal of the NO_DATA_INTERFACE quirk and makes the
probe algorithm somewhat easier to follow.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/class/cdc-acm.c | 44 ++++++++++---------------------------
drivers/usb/class/cdc-acm.h | 11 +++++-----
2 files changed, 16 insertions(+), 39 deletions(-)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 2758e295871e..eda883ce6d9d 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1217,44 +1217,27 @@ static int acm_probe(struct usb_interface *intf,
if (cmgmd)
call_intf_num = cmgmd->bDataInterface;
+ if (intf->cur_altsetting->desc.bNumEndpoints == 3) {
+ dev_dbg(&intf->dev, "assuming single interface\n");
+ combined_interfaces = 1;
+ control_interface = data_interface = intf;
+ goto look_for_collapsed_interface;
+ }
+
if (!union_header) {
if (call_intf_num > 0) {
dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n");
- /* quirks for Droids MuIn LCD */
- if (quirks & NO_DATA_INTERFACE) {
- data_interface = usb_ifnum_to_if(usb_dev, 0);
- } else {
- data_intf_num = call_intf_num;
- data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
- }
+ data_intf_num = call_intf_num;
+ data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
control_interface = intf;
} else {
- if (intf->cur_altsetting->desc.bNumEndpoints != 3) {
- dev_dbg(&intf->dev,"No union descriptor, giving up\n");
- return -ENODEV;
- } else {
- dev_warn(&intf->dev,"No union descriptor, testing for castrated device\n");
- combined_interfaces = 1;
- control_interface = data_interface = intf;
- goto look_for_collapsed_interface;
- }
+ dev_dbg(&intf->dev, "No union descriptor, giving up\n");
+ return -ENODEV;
}
} else {
- int class = -1;
-
data_intf_num = union_header->bSlaveInterface0;
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
-
- if (control_interface)
- class = control_interface->cur_altsetting->desc.bInterfaceClass;
-
- if (class != USB_CLASS_COMM && class != USB_CLASS_CDC_DATA) {
- dev_warn(&intf->dev, "Broken union descriptor, assuming single interface\n");
- combined_interfaces = 1;
- control_interface = data_interface = intf;
- goto look_for_collapsed_interface;
- }
}
if (!control_interface || !data_interface) {
@@ -1881,11 +1864,6 @@ static const struct usb_device_id acm_ids[] = {
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
- /* Support for Droids MuIn LCD */
- { USB_DEVICE(0x04d8, 0x000b),
- .driver_info = NO_DATA_INTERFACE,
- },
-
#if IS_ENABLED(CONFIG_INPUT_IMS_PCU)
{ USB_DEVICE(0x04d8, 0x0082), /* Application mode */
.driver_info = IGNORE_DEVICE,
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index b7174a0098a5..b2135095898f 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -135,9 +135,8 @@ struct acm {
#define NO_UNION_NORMAL BIT(0)
#define SINGLE_RX_URB BIT(1)
#define NO_CAP_LINE BIT(2)
-#define NO_DATA_INTERFACE BIT(4)
-#define IGNORE_DEVICE BIT(5)
-#define QUIRK_CONTROL_LINE_STATE BIT(6)
-#define CLEAR_HALT_CONDITIONS BIT(7)
-#define SEND_ZERO_PACKET BIT(8)
-#define DISABLE_ECHO BIT(9)
+#define IGNORE_DEVICE BIT(3)
+#define QUIRK_CONTROL_LINE_STATE BIT(4)
+#define CLEAR_HALT_CONDITIONS BIT(5)
+#define SEND_ZERO_PACKET BIT(6)
+#define DISABLE_ECHO BIT(7)
--
2.26.2
next prev parent reply other threads:[~2020-09-21 11:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-21 11:35 [PATCH 0/4] USB: cdc-acm: handle broken union descriptors Johan Hovold
2020-09-21 11:35 ` [PATCH 1/4] Revert "cdc-acm: hardening against malicious devices" Johan Hovold
2020-09-21 11:35 ` [PATCH 2/4] USB: cdc-acm: handle broken union descriptors Johan Hovold
2020-09-21 11:35 ` [PATCH 3/4] USB: cdc-acm: use common data-class define Johan Hovold
2020-09-21 11:35 ` Johan Hovold [this message]
2020-09-21 11:53 ` [RFC 4/4] USB: cdc-acm: clean up handling of quirky devices Oliver Neukum
2020-09-21 12:15 ` Johan Hovold
2020-09-21 12:45 ` Oliver Neukum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200921113525.32187-5-johan@kernel.org \
--to=johan@kernel.org \
--cc=f1rmb.daniel@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=oneukum@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).