From: Matthias Kaehlcke <mka@chromium.org>
To: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Felipe Balbi <balbi@kernel.org>,
Stephen Boyd <swboyd@chromium.org>,
Doug Anderson <dianders@chromium.org>,
linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Manu Gautam <mgautam@codeaurora.org>
Subject: Re: [PATCH v3 3/5] usb: dwc3: qcom: Configure wakeup interrupts and set genpd active wakeup flag
Date: Tue, 29 Sep 2020 12:01:44 -0700 [thread overview]
Message-ID: <20200929190144.GD1621304@google.com> (raw)
In-Reply-To: <1601376452-31839-4-git-send-email-sanm@codeaurora.org>
On Tue, Sep 29, 2020 at 04:17:30PM +0530, Sandeep Maheswaram wrote:
> Configure interrupts based on hs_phy_flag to avoid triggering of
> interrupts during system suspend and suspends successfully.
> Set genpd active wakeup flag for usb gdsc if wakeup capable devices
> are connected so that wake up happens without reenumeration.
>
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 74 +++++++++++++++++++++++++++++++++++---------
> 1 file changed, 59 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index c703d55..b6f36bd 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -17,9 +17,11 @@
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> #include <linux/phy/phy.h>
> +#include <linux/pm_domain.h>
> #include <linux/usb/of.h>
> #include <linux/reset.h>
> #include <linux/iopoll.h>
> +#include <linux/usb/hcd.h>
>
> #include "core.h"
>
> @@ -293,19 +295,33 @@ static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
>
> static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
> {
> + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
> +
> if (qcom->hs_phy_irq) {
> disable_irq_wake(qcom->hs_phy_irq);
> disable_irq_nosync(qcom->hs_phy_irq);
> }
>
> - if (qcom->dp_hs_phy_irq) {
> - disable_irq_wake(qcom->dp_hs_phy_irq);
> - disable_irq_nosync(qcom->dp_hs_phy_irq);
> - }
> + if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_LS) {
> + if (qcom->dp_hs_phy_irq) {
> + disable_irq_wake(qcom->dp_hs_phy_irq);
> + disable_irq_nosync(qcom->dp_hs_phy_irq);
> + }
> + } else if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_HS) {
> + if (qcom->dm_hs_phy_irq) {
> + disable_irq_wake(qcom->dm_hs_phy_irq);
> + disable_irq_nosync(qcom->dm_hs_phy_irq);
> + }
> + } else {
> + if (qcom->dp_hs_phy_irq) {
> + disable_irq_wake(qcom->dp_hs_phy_irq);
> + disable_irq_nosync(qcom->dp_hs_phy_irq);
> + }
>
> - if (qcom->dm_hs_phy_irq) {
> - disable_irq_wake(qcom->dm_hs_phy_irq);
> - disable_irq_nosync(qcom->dm_hs_phy_irq);
> + if (qcom->dm_hs_phy_irq) {
> + disable_irq_wake(qcom->dm_hs_phy_irq);
> + disable_irq_nosync(qcom->dm_hs_phy_irq);
> + }
This function would benefit from a helper like this:
static void dwc3_qcon_enable_wakeup_irq(int wake_irq)
{
if (wake_irq) {
disable_irq_wake(wake_irq);
disable_irq_nosync(wake_irq);
}
}
> }
>
> if (qcom->ss_phy_irq) {
> @@ -316,19 +332,33 @@ static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
>
> static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> {
> + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
> +
> if (qcom->hs_phy_irq) {
> enable_irq(qcom->hs_phy_irq);
> enable_irq_wake(qcom->hs_phy_irq);
> }
>
> - if (qcom->dp_hs_phy_irq) {
> - enable_irq(qcom->dp_hs_phy_irq);
> - enable_irq_wake(qcom->dp_hs_phy_irq);
> - }
> + if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_LS) {
> + if (qcom->dp_hs_phy_irq) {
> + enable_irq(qcom->dp_hs_phy_irq);
> + enable_irq_wake(qcom->dp_hs_phy_irq);
> + }
> + } else if (dwc->hs_phy_flags & PHY_MODE_USB_HOST_HS) {
> + if (qcom->dm_hs_phy_irq) {
> + enable_irq(qcom->dm_hs_phy_irq);
> + enable_irq_wake(qcom->dm_hs_phy_irq);
> + }
> + } else {
> + if (qcom->dp_hs_phy_irq) {
> + enable_irq(qcom->dp_hs_phy_irq);
> + enable_irq_wake(qcom->dp_hs_phy_irq);
> + }
>
> - if (qcom->dm_hs_phy_irq) {
> - enable_irq(qcom->dm_hs_phy_irq);
> - enable_irq_wake(qcom->dm_hs_phy_irq);
> + if (qcom->dm_hs_phy_irq) {
> + enable_irq(qcom->dm_hs_phy_irq);
> + enable_irq_wake(qcom->dm_hs_phy_irq);
> + }
> }
Same as for _disable(), a helper would make this function more
digestable.
> if (qcom->ss_phy_irq) {
> @@ -341,6 +371,15 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
> {
> u32 val;
> int i, ret;
> + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
> + struct usb_hcd *hcd;
nit: remove extra blank
> + struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain);
> +
> + if (dwc->xhci) {
> + hcd = platform_get_drvdata(dwc->xhci);
> + if (usb_wakeup_enabled_descendants(hcd->self.root_hub))
> + genpd->flags |= GENPD_FLAG_ACTIVE_WAKEUP;
> + }
Do this after the check for 'qcom->is_suspended' below
>
> if (qcom->is_suspended)
> return 0;
> @@ -366,6 +405,11 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
> {
> int ret;
> int i;
> + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
> + struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain);
> +
> + if (dwc->xhci)
> + genpd->flags &= ~GENPD_FLAG_ACTIVE_WAKEUP;
ditto
>
> if (!qcom->is_suspended)
> return 0;
> @@ -764,7 +808,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
> if (ret)
> goto interconnect_exit;
>
> - device_init_wakeup(&pdev->dev, 1);
> + device_init_wakeup(&pdev->dev, of_property_read_bool(np, "wakeup-source"));
> qcom->is_suspended = false;
> pm_runtime_set_active(dev);
> pm_runtime_enable(dev);
>
next prev parent reply other threads:[~2020-09-29 19:01 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-29 10:47 [PATCH v3 0/5] USB DWC3 host wake up support from system suspend Sandeep Maheswaram
2020-09-29 10:47 ` [PATCH v3 1/5] usb: dwc3: core: Host " Sandeep Maheswaram
2020-09-29 11:42 ` Sergei Shtylyov
2020-09-29 18:17 ` Matthias Kaehlcke
2020-09-29 10:47 ` [PATCH v3 2/5] usb: dwc3: host: Add suspend_quirk for dwc3 host Sandeep Maheswaram
2020-09-29 18:50 ` Matthias Kaehlcke
2020-09-29 10:47 ` [PATCH v3 3/5] usb: dwc3: qcom: Configure wakeup interrupts and set genpd active wakeup flag Sandeep Maheswaram
2020-09-29 19:01 ` Matthias Kaehlcke [this message]
2020-09-29 10:47 ` [PATCH v3 4/5] arm64: dts: qcom: sc7180: Use pdc interrupts for USB instead of GIC interrupts Sandeep Maheswaram
2020-09-29 11:41 ` Sergei Shtylyov
2020-10-01 1:05 ` Stephen Boyd
2020-10-01 8:14 ` Sergei Shtylyov
2020-09-29 10:47 ` [PATCH v3 5/5] arm64: dts: qcom: sc7180: Add wakeup-source property for USB controller node Sandeep Maheswaram
2020-09-29 19:09 ` Matthias Kaehlcke
2020-10-01 1:06 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200929190144.GD1621304@google.com \
--to=mka@chromium.org \
--cc=agross@kernel.org \
--cc=balbi@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mgautam@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=sanm@codeaurora.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).