From: Himadri Pandya <himadrispandya@gmail.com>
To: johan@kernel.org, gregkh@linuxfoundation.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: linux-kernel-mentees@lists.linuxfoundation.org,
Himadri Pandya <himadrispandya@gmail.com>
Subject: [PATCH 14/15] usb: serial: keyspan_pda: use usb_control_msg_recv() and usb_control_msg_send()
Date: Wed, 4 Nov 2020 12:17:02 +0530 [thread overview]
Message-ID: <20201104064703.15123-15-himadrispandya@gmail.com> (raw)
In-Reply-To: <20201104064703.15123-1-himadrispandya@gmail.com>
The new usb_control_msg_recv() and usb_control_msg_send() nicely wraps
usb_control_msg() with proper error check. Hence use the wrappers
instead of calling usb_control_msg() directly.
Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
---
drivers/usb/serial/keyspan_pda.c | 172 +++++++++++++------------------
1 file changed, 72 insertions(+), 100 deletions(-)
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index c1333919716b..44e1c4490fa9 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -115,17 +115,17 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
/* ask the device to tell us when the tx buffer becomes
sufficiently empty */
- result = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- 7, /* request_unthrottle */
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE
- | USB_DIR_OUT,
- 16, /* value: threshold */
- 0, /* index */
- NULL,
- 0,
- 2000);
- if (result < 0)
+ result = usb_control_msg_send(serial->dev, 0,
+ 7, /* request_unthrottle */
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE
+ | USB_DIR_OUT,
+ 16, /* value: threshold */
+ 0, /* index */
+ NULL,
+ 0,
+ 2000,
+ GFP_KERNEL);
+ if (result)
dev_dbg(&serial->dev->dev, "%s - error %d from usb_control_msg\n",
__func__, result);
}
@@ -269,17 +269,18 @@ static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud)
/* rather than figure out how to sleep while waiting for this
to complete, I just use the "legacy" API. */
- rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- 0, /* set baud */
- USB_TYPE_VENDOR
- | USB_RECIP_INTERFACE
- | USB_DIR_OUT, /* type */
- bindex, /* value */
- 0, /* index */
- NULL, /* &data */
- 0, /* size */
- 2000); /* timeout */
- if (rc < 0)
+ rc = usb_control_msg_send(serial->dev, 0,
+ 0, /* set baud */
+ USB_TYPE_VENDOR
+ | USB_RECIP_INTERFACE
+ | USB_DIR_OUT, /* type */
+ bindex, /* value */
+ 0, /* index */
+ NULL, /* &data */
+ 0, /* size */
+ 2000, /* timeout */
+ GFP_KERNEL);
+ if (rc)
return 0;
return baud;
}
@@ -296,11 +297,12 @@ static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
value = 1; /* start break */
else
value = 0; /* clear break */
- result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- 4, /* set break */
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- value, 0, NULL, 0, 2000);
- if (result < 0)
+ result = usb_control_msg_send(serial->dev, 0,
+ 4, /* set break */
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
+ USB_DIR_OUT,
+ value, 0, NULL, 0, 2000, GFP_KERNEL);
+ if (result)
dev_dbg(&port->dev, "%s - error %d from usb_control_msg\n",
__func__, result);
/* there is something funky about this.. the TCSBRK that 'cu' performs
@@ -359,22 +361,11 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial,
unsigned char *value)
{
int rc;
- u8 *data;
-
- data = kmalloc(1, GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- 3, /* get pins */
- USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN,
- 0, 0, data, 1, 2000);
- if (rc == 1)
- *value = *data;
- else if (rc >= 0)
- rc = -EIO;
-
- kfree(data);
+ rc = usb_control_msg_recv(serial->dev, 0,
+ 3, /* get pins */
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
+ USB_DIR_IN, 0, 0, value, 1, 2000,
+ GFP_KERNEL);
return rc;
}
@@ -383,10 +374,11 @@ static int keyspan_pda_set_modem_info(struct usb_serial *serial,
unsigned char value)
{
int rc;
- rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- 3, /* set pins */
- USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_OUT,
- value, 0, NULL, 0, 2000);
+ rc = usb_control_msg_send(serial->dev, 0,
+ 3, /* set pins */
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
+ USB_DIR_OUT, value, 0, NULL, 0, 2000,
+ GFP_KERNEL);
return rc;
}
@@ -481,36 +473,25 @@ static int keyspan_pda_write(struct tty_struct *tty,
device how much room it really has. This is done only on
scheduler time, since usb_control_msg() sleeps. */
if (count > priv->tx_room && !in_interrupt()) {
- u8 *room;
-
- room = kmalloc(1, GFP_KERNEL);
- if (!room) {
- rc = -ENOMEM;
- goto exit;
+ u8 room;
+
+ rc = usb_control_msg_recv(serial->dev, 0,
+ 6, /* write_room */
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE
+ | USB_DIR_IN,
+ 0, /* value: 0 means "remaining room" */
+ 0, /* index */
+ &room,
+ 1,
+ 2000,
+ GFP_KERNEL);
+ if (rc == 0) {
+ dev_dbg(&port->dev, "roomquery says %d\n", room);
+ priv->tx_room = room;
}
- rc = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 6, /* write_room */
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE
- | USB_DIR_IN,
- 0, /* value: 0 means "remaining room" */
- 0, /* index */
- room,
- 1,
- 2000);
- if (rc > 0) {
- dev_dbg(&port->dev, "roomquery says %d\n", *room);
- priv->tx_room = *room;
- }
- kfree(room);
- if (rc < 0) {
- dev_dbg(&port->dev, "roomquery failed\n");
- goto exit;
- }
- if (rc == 0) {
- dev_dbg(&port->dev, "roomquery returned 0 bytes\n");
- rc = -EIO; /* device didn't return any data */
+ if (rc) {
+ dev_dbg(&port->dev, "roomquery failed %d\n", rc);
goto exit;
}
}
@@ -613,36 +594,28 @@ static int keyspan_pda_open(struct tty_struct *tty,
struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
- u8 *room;
+ u8 room;
int rc = 0;
struct keyspan_pda_private *priv;
- /* find out how much room is in the Tx ring */
- room = kmalloc(1, GFP_KERNEL);
- if (!room)
- return -ENOMEM;
-
- rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- 6, /* write_room */
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE
- | USB_DIR_IN,
- 0, /* value */
- 0, /* index */
- room,
- 1,
- 2000);
- if (rc < 0) {
- dev_dbg(&port->dev, "%s - roomquery failed\n", __func__);
- goto error;
- }
- if (rc == 0) {
- dev_dbg(&port->dev, "%s - roomquery returned 0 bytes\n", __func__);
- rc = -EIO;
+ rc = usb_control_msg_recv(serial->dev, 0,
+ 6, /* write_room */
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
+ USB_DIR_IN,
+ 0, /* value */
+ 0, /* index */
+ &room,
+ 1,
+ 2000,
+ GFP_KERNEL);
+ if (rc) {
+ dev_dbg(&port->dev, "%s - roomquery failed %d\n", __func__, rc);
goto error;
}
+
priv = usb_get_serial_port_data(port);
- priv->tx_room = *room;
- priv->tx_throttled = *room ? 0 : 1;
+ priv->tx_room = room;
+ priv->tx_throttled = room ? 0 : 1;
/*Start reading from the device*/
rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
@@ -651,7 +624,6 @@ static int keyspan_pda_open(struct tty_struct *tty,
goto error;
}
error:
- kfree(room);
return rc;
}
static void keyspan_pda_close(struct usb_serial_port *port)
--
2.17.1
next prev parent reply other threads:[~2020-11-04 6:48 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-04 6:46 [PATCH 00/15] usb: serial: avoid using usb_control_msg() directly Himadri Pandya
2020-11-04 6:46 ` [PATCH 01/15] usb: serial: ark3116: use usb_control_msg_recv() and usb_control_msg_send() Himadri Pandya
2020-12-04 9:16 ` Johan Hovold
2020-11-04 6:46 ` [PATCH 02/15] usb: serial: belkin_sa: use usb_control_msg_send() Himadri Pandya
2020-12-04 9:17 ` Johan Hovold
2020-11-04 6:46 ` [PATCH 03/15] usb: serial: ch314: use usb_control_msg_recv() and usb_control_msg_send() Himadri Pandya
2020-12-04 9:24 ` Johan Hovold
2020-11-04 6:46 ` [PATCH 04/15] usb: serial: cp210x: " Himadri Pandya
2020-12-04 9:34 ` Johan Hovold
2020-11-04 6:46 ` [PATCH 05/15] usb: serial: cypress_m8: " Himadri Pandya
2020-12-04 9:37 ` Johan Hovold
2020-11-04 6:46 ` [PATCH 06/15] usb: serial: f81232: " Himadri Pandya
2020-12-04 9:49 ` Johan Hovold
2020-11-04 6:46 ` [PATCH 07/15] usb: serial: f81534: " Himadri Pandya
2020-12-04 9:55 ` Johan Hovold
2020-11-04 6:46 ` [PATCH 08/15] usb: serial: ftdi_sio: " Himadri Pandya
2020-12-04 10:03 ` Johan Hovold
2020-11-04 6:46 ` [PATCH 09/15] usb: serial: io_edgeport: " Himadri Pandya
2020-12-04 10:10 ` Johan Hovold
2020-11-04 6:46 ` [PATCH 10/15] usb: serial: io_ti: " Himadri Pandya
2020-12-04 10:12 ` Johan Hovold
2020-11-04 6:46 ` [PATCH 11/15] usb: serial: ipaq: use usb_control_msg_send() Himadri Pandya
2020-12-04 10:21 ` Johan Hovold
2020-11-04 6:47 ` [PATCH 12/15] usb: serial: ipw: " Himadri Pandya
2020-12-04 10:27 ` Johan Hovold
2020-11-04 6:47 ` [PATCH 13/15] usb: serial: iuu_phoenix: " Himadri Pandya
2020-12-04 10:28 ` Johan Hovold
2020-11-04 6:47 ` Himadri Pandya [this message]
2020-12-04 10:31 ` [PATCH 14/15] usb: serial: keyspan_pda: use usb_control_msg_recv() and usb_control_msg_send() Johan Hovold
2020-11-04 6:47 ` [PATCH 15/15] usb: serial: kl5kusb105: " Himadri Pandya
2020-12-04 10:37 ` Johan Hovold
2020-11-06 10:43 ` [PATCH 00/15] usb: serial: avoid using usb_control_msg() directly Greg KH
2020-12-04 9:09 ` Johan Hovold
2020-12-24 10:01 ` Himadri Pandya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201104064703.15123-15-himadrispandya@gmail.com \
--to=himadrispandya@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel-mentees@lists.linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).