From: Peter Chen <peter.chen@kernel.org>
To: pawell@cadence.com, rogerq@ti.com
Cc: linux-usb@vger.kernel.org, linux-imx@nxp.com,
a-govindraju@ti.com, frank.li@nxp.com,
Peter Chen <peter.chen@nxp.com>
Subject: [PATCH 1/2] usb: cdns3: imx: fix writing read-only memory issue
Date: Thu, 10 Dec 2020 21:31:36 +0800 [thread overview]
Message-ID: <20201210133137.20249-1-peter.chen@kernel.org> (raw)
From: Peter Chen <peter.chen@nxp.com>
The memory for struct clk_bulk_data should not be static which will be written
during the clk_bulk_get. It fixed below oops when loading cdns3-imx as module.
[ 17.272605] Unable to handle kernel write to read-only memory at virtual address ffff8000092a5398
[ 17.299730] Mem abort info:
[ 17.313542] unregister ISI channel: mxc_isi.4
[ 17.324076] ESR = 0x9600004f
[ 17.344658] EC = 0x25: DABT (current EL), IL = 32 bits
[ 17.402055] SET = 0, FnV = 0
[ 17.404321] mxs_phy 5b100000.usbphy: supply phy-3p0 not found, using dummy regulator
[ 17.405121] EA = 0, S1PTW = 0
[ 17.405133] Data abort info:
[ 17.496231] ISV = 0, ISS = 0x0000004f
[ 17.510871] CM = 0, WnR = 1
[ 17.533542] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081ea5000
[ 17.545709] [ffff8000092a5398] pgd=00000008bffff003, p4d=00000008bffff003, pud=00000008bfffe003, pmd=0000000885041003, pte=006000088513b783
[ 17.573521] Internal error: Oops: 9600004f [#1] PREEMPT SMP
[ 17.579113] Modules linked in: usbmisc_imx phy_mxs_usb phy_cadence_salvo cdns3_imx(+) tcpci imx8_media_dev(C) caam error
[ 17.590044] CPU: 2 PID: 253 Comm: systemd-udevd Tainted: G C 5.10.0-rc4-04445-g11f3c3a29d0-dirty #19
[ 17.600488] Hardware name: Freescale i.MX8QXP MEK (DT)
[ 17.605633] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--)
[ 17.611662] pc : __clk_bulk_get+0x48/0x130
[ 17.615786] lr : clk_bulk_get+0x18/0x20
[ 17.619634] sp : ffff80001369b880
[ 17.622953] x29: ffff80001369b880 x28: 0000000000000013
[ 17.628277] x27: 0000000000000100 x26: ffff00080553b100
[ 17.633602] x25: ffff80001229b4d8 x24: 0000000000000000
[ 17.638928] x23: ffff000800665410 x22: 0000000000000005
[ 17.644275] x21: ffff8000092a5390 x20: ffff000800665400
[ 17.649605] x19: ffff000804e6f980 x18: 000000005b110000
[ 17.654946] x17: 0000000000000000 x16: 0000000000000000
[ 17.660274] x15: ffff800011989100 x14: 0000000000000000
[ 17.665599] x13: ffff800013ce1000 x12: ffff800013ca1000
[ 17.670924] x11: 000000005b110000 x10: 0000000000000000
[ 17.676249] x9 : ffff8000106c5a30 x8 : ffff000804e6fa00
[ 17.681575] x7 : 0000000000000000 x6 : 000000000000003f
[ 17.686901] x5 : 0000000000000040 x4 : ffff80001369b8b0
[ 17.692228] x3 : ffff8000092a5398 x2 : ffff8000092a5390
[ 17.697574] x1 : ffff8000092a53e8 x0 : 0000000000000004
[ 17.702905] Call trace:
[ 17.705366] __clk_bulk_get+0x48/0x130
[ 17.709125] clk_bulk_get+0x18/0x20
[ 17.712620] devm_clk_bulk_get+0x58/0xb8
[ 17.716563] cdns_imx_probe+0x84/0x1f0 [cdns3_imx]
[ 17.721363] platform_drv_probe+0x58/0xa8
[ 17.725381] really_probe+0xec/0x4c8
[ 17.728967] driver_probe_device+0xf4/0x160
[ 17.733160] device_driver_attach+0x74/0x80
[ 17.737355] __driver_attach+0xa4/0x170
[ 17.741202] bus_for_each_dev+0x74/0xc8
[ 17.745043] driver_attach+0x28/0x30
[ 17.748620] bus_add_driver+0x144/0x228
[ 17.752462] driver_register+0x68/0x118
[ 17.756308] __platform_driver_register+0x4c/0x58
[ 17.761022] cdns_imx_driver_init+0x24/0x1000 [cdns3_imx]
[ 17.766434] do_one_initcall+0x48/0x2c0
[ 17.770280] do_init_module+0x5c/0x220
[ 17.774029] load_module+0x210c/0x2858
[ 17.777784] __do_sys_finit_module+0xb8/0x120
[ 17.782148] __arm64_sys_finit_module+0x24/0x30
[ 17.786691] el0_svc_common.constprop.0+0x70/0x168
[ 17.791497] do_el0_svc+0x28/0x88
[ 17.794822] el0_sync_handler+0x158/0x160
[ 17.798833] el0_sync+0x140/0x180
[ 17.802158] Code: aa0203f5 91002043 8b205021 a90153f3 (f801047f)
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
drivers/usb/cdns3/cdns3-imx.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c
index bae878c59f09..7d38180c842b 100644
--- a/drivers/usb/cdns3/cdns3-imx.c
+++ b/drivers/usb/cdns3/cdns3-imx.c
@@ -185,7 +185,11 @@ static int cdns_imx_probe(struct platform_device *pdev)
}
data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks);
- data->clks = (struct clk_bulk_data *)imx_cdns3_core_clks;
+ data->clks = devm_kmemdup(dev, imx_cdns3_core_clks,
+ sizeof(imx_cdns3_core_clks), GFP_KERNEL);
+ if (!data->clks)
+ return -ENOMEM;
+
ret = devm_clk_bulk_get(dev, data->num_clks, data->clks);
if (ret)
return ret;
--
2.17.1
next reply other threads:[~2020-12-10 13:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-10 13:31 Peter Chen [this message]
2020-12-10 13:31 ` [PATCH 2/2] usb: cdns3: imx: fix can't create core device the second time issue Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201210133137.20249-1-peter.chen@kernel.org \
--to=peter.chen@kernel.org \
--cc=a-govindraju@ti.com \
--cc=frank.li@nxp.com \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=pawell@cadence.com \
--cc=peter.chen@nxp.com \
--cc=rogerq@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).