From: Jerome Brunet <jbrunet@baylibre.com>
To: Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
Ruslan Bilovol <ruslan.bilovol@gmail.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] usb: gadget: f_uac2: reset wMaxPacketSize
Date: Mon, 21 Dec 2020 18:35:28 +0100 [thread overview]
Message-ID: <20201221173531.215169-2-jbrunet@baylibre.com> (raw)
In-Reply-To: <20201221173531.215169-1-jbrunet@baylibre.com>
With commit 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth")
wMaxPacketSize is computed dynamically but the value is never reset.
Because of this, the actual maximum packet size can only decrease each time
the audio gadget is instantiated.
Reset the endpoint maximum packet size and mark wMaxPacketSize as dynamic
to solve the problem.
Fixes: 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/usb/gadget/function/f_uac2.c | 69 ++++++++++++++++++++++------
1 file changed, 55 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index 3633df6d7610..5d960b6603b6 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -271,7 +271,7 @@ static struct usb_endpoint_descriptor fs_epout_desc = {
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
- .wMaxPacketSize = cpu_to_le16(1023),
+ /* .wMaxPacketSize = DYNAMIC */
.bInterval = 1,
};
@@ -280,7 +280,7 @@ static struct usb_endpoint_descriptor hs_epout_desc = {
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
- .wMaxPacketSize = cpu_to_le16(1024),
+ /* .wMaxPacketSize = DYNAMIC */
.bInterval = 4,
};
@@ -348,7 +348,7 @@ static struct usb_endpoint_descriptor fs_epin_desc = {
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
- .wMaxPacketSize = cpu_to_le16(1023),
+ /* .wMaxPacketSize = DYNAMIC */
.bInterval = 1,
};
@@ -357,7 +357,7 @@ static struct usb_endpoint_descriptor hs_epin_desc = {
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
- .wMaxPacketSize = cpu_to_le16(1024),
+ /* .wMaxPacketSize = DYNAMIC */
.bInterval = 4,
};
@@ -444,12 +444,28 @@ struct cntrl_range_lay3 {
__le32 dRES;
} __packed;
-static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
+static int set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
struct usb_endpoint_descriptor *ep_desc,
- unsigned int factor, bool is_playback)
+ enum usb_device_speed speed, bool is_playback)
{
int chmask, srate, ssize;
- u16 max_packet_size;
+ u16 max_size_bw, max_size_ep;
+ unsigned int factor;
+
+ switch (speed) {
+ case USB_SPEED_FULL:
+ max_size_ep = 1023;
+ factor = 1000;
+ break;
+
+ case USB_SPEED_HIGH:
+ max_size_ep = 1024;
+ factor = 8000;
+ break;
+
+ default:
+ return -EINVAL;
+ }
if (is_playback) {
chmask = uac2_opts->p_chmask;
@@ -461,10 +477,12 @@ static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
ssize = uac2_opts->c_ssize;
}
- max_packet_size = num_channels(chmask) * ssize *
+ max_size_bw = num_channels(chmask) * ssize *
DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1)));
- ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_packet_size,
- le16_to_cpu(ep_desc->wMaxPacketSize)));
+ ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_size_bw,
+ max_size_ep));
+
+ return 0;
}
/* Use macro to overcome line length limitation */
@@ -670,10 +688,33 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
}
/* Calculate wMaxPacketSize according to audio bandwidth */
- set_ep_max_packet_size(uac2_opts, &fs_epin_desc, 1000, true);
- set_ep_max_packet_size(uac2_opts, &fs_epout_desc, 1000, false);
- set_ep_max_packet_size(uac2_opts, &hs_epin_desc, 8000, true);
- set_ep_max_packet_size(uac2_opts, &hs_epout_desc, 8000, false);
+ ret = set_ep_max_packet_size(uac2_opts, &fs_epin_desc, USB_SPEED_FULL,
+ true);
+ if (ret < 0) {
+ dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+ return ret;
+ }
+
+ ret = set_ep_max_packet_size(uac2_opts, &fs_epout_desc, USB_SPEED_FULL,
+ false);
+ if (ret < 0) {
+ dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+ return ret;
+ }
+
+ ret = set_ep_max_packet_size(uac2_opts, &hs_epin_desc, USB_SPEED_HIGH,
+ true);
+ if (ret < 0) {
+ dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+ return ret;
+ }
+
+ ret = set_ep_max_packet_size(uac2_opts, &hs_epout_desc, USB_SPEED_HIGH,
+ false);
+ if (ret < 0) {
+ dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+ return ret;
+ }
if (EPOUT_EN(uac2_opts)) {
agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);
--
2.29.2
next prev parent reply other threads:[~2020-12-21 18:07 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-21 17:35 [PATCH 0/4] usb: gadget: audio fixes and clean ups Jerome Brunet
2020-12-21 17:35 ` Jerome Brunet [this message]
2020-12-21 17:35 ` [PATCH 2/4] usb: gadget: u_audio: factorize ssize to alsa fmt conversion Jerome Brunet
2020-12-21 17:35 ` [PATCH 3/4] usb: gadget: u_audio: remove struct uac_req Jerome Brunet
2020-12-28 15:01 ` Greg Kroah-Hartman
2020-12-29 22:30 ` Jack Pham
2021-01-04 14:08 ` Jerome Brunet
2021-01-04 15:36 ` Greg Kroah-Hartman
2020-12-21 17:35 ` [PATCH 4/4] usb: gadget: u_audio: clean up locking Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201221173531.215169-2-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=ruslan.bilovol@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).