From: Johan Hovold <johan@kernel.org>
To: Johan Hovold <johan@kernel.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>,
Pho Tran <photranvan0712@gmail.com>,
Hung.Nguyen@silabs.com, Tung.Pham@silabs.com,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] USB: serial: cp210x: provide gpio valid mask
Date: Fri, 9 Apr 2021 17:52:15 +0200 [thread overview]
Message-ID: <20210409155216.31867-2-johan@kernel.org> (raw)
In-Reply-To: <20210409155216.31867-1-johan@kernel.org>
Use the new GPIO valid-mask feature to inform gpiolib which pins are
available for use instead of handling that in a request callback.
This also allows user space to figure out which pins are available
through the chardev interface without having to request each pin in
turn.
Note that the return value when requesting an unavailable pin will now
be -EINVAL instead of -ENODEV.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/serial/cp210x.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index a373cd63b3a4..ceb3a656a075 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1410,17 +1410,6 @@ static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
}
#ifdef CONFIG_GPIOLIB
-static int cp210x_gpio_request(struct gpio_chip *gc, unsigned int offset)
-{
- struct usb_serial *serial = gpiochip_get_data(gc);
- struct cp210x_serial_private *priv = usb_get_serial_data(serial);
-
- if (priv->gpio_altfunc & BIT(offset))
- return -ENODEV;
-
- return 0;
-}
-
static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio)
{
struct usb_serial *serial = gpiochip_get_data(gc);
@@ -1549,6 +1538,18 @@ static int cp210x_gpio_set_config(struct gpio_chip *gc, unsigned int gpio,
return -ENOTSUPP;
}
+static int cp210x_gpio_init_valid_mask(struct gpio_chip *gc,
+ unsigned long *valid_mask, unsigned int ngpios)
+{
+ struct usb_serial *serial = gpiochip_get_data(gc);
+ struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+ unsigned long altfunc_mask = priv->gpio_altfunc;
+
+ bitmap_complement(valid_mask, &altfunc_mask, ngpios);
+
+ return 0;
+}
+
/*
* This function is for configuring GPIO using shared pins, where other signals
* are made unavailable by configuring the use of GPIO. This is believed to be
@@ -1786,13 +1787,13 @@ static int cp210x_gpio_init(struct usb_serial *serial)
return result;
priv->gc.label = "cp210x";
- priv->gc.request = cp210x_gpio_request;
priv->gc.get_direction = cp210x_gpio_direction_get;
priv->gc.direction_input = cp210x_gpio_direction_input;
priv->gc.direction_output = cp210x_gpio_direction_output;
priv->gc.get = cp210x_gpio_get;
priv->gc.set = cp210x_gpio_set;
priv->gc.set_config = cp210x_gpio_set_config;
+ priv->gc.init_valid_mask = cp210x_gpio_init_valid_mask;
priv->gc.owner = THIS_MODULE;
priv->gc.parent = &serial->interface->dev;
priv->gc.base = -1;
--
2.26.3
next prev parent reply other threads:[~2021-04-09 15:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-09 15:52 [PATCH 0/2] USB: serial: cp210x: provide gpio valid mask Johan Hovold
2021-04-09 15:52 ` Johan Hovold [this message]
2021-04-09 15:52 ` [PATCH 2/2] USB: serial: cp210x: add gpio-configuration debug printk Johan Hovold
2021-04-09 16:22 ` Andy Shevchenko
2021-04-09 16:32 ` Johan Hovold
2021-04-09 16:23 ` [PATCH 0/2] USB: serial: cp210x: provide gpio valid mask Andy Shevchenko
2021-04-12 10:00 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210409155216.31867-2-johan@kernel.org \
--to=johan@kernel.org \
--cc=Hung.Nguyen@silabs.com \
--cc=Tung.Pham@silabs.com \
--cc=andy.shevchenko@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=photranvan0712@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox