[PATCH] Add missing link states in dwc3 gadget wakeup

[Marcel Hamer <marcel@solidxs.se>]

In dwc3_send_gadget_ep_cmd() a check is performed if the gadget needs
waking up. The following condition is checked before calling the
__dwc3_gadget_wakeup() function:

	needs_wakeup = (dwc->link_state == DWC3_LINK_STATE_U1 ||
        		dwc->link_state == DWC3_LINK_STATE_U2 ||
                        dwc->link_state == DWC3_LINK_STATE_U3);

Inside __dwc3_gadget_wakeup() only link_state DWC3_LINK_STATE_U3 is checked
and link state DWC3_LINK_STATE_U1 and DWC3_LINK_STATE_U2 are considered
invalid and generate a warning becaus of the call to:

dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n", ret);

because of ret being -EINVAL.

Signed-off-by: Marcel Hamer <marcel@solidxs.se>
---
 drivers/usb/dwc3/gadget.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index c7ef218e7a8c..d05a7d630410 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1972,6 +1972,8 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 	switch (link_state) {
 	case DWC3_LINK_STATE_RESET:
 	case DWC3_LINK_STATE_RX_DET:	/* in HS, means Early Suspend */
+	case DWC3_LINK_STATE_U1:
+	case DWC3_LINK_STATE_U2:
 	case DWC3_LINK_STATE_U3:	/* in HS, means SUSPEND */
 	case DWC3_LINK_STATE_RESUME:
 		break;
-- 
2.25.1