From: Peter Chen <peter.chen@kernel.org>
To: Sanket Parmar <sparmar@cadence.com>, pawell@cadence.com
Cc: a-govindraju@ti.com, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, kurahul@cadence.com,
gregkh@linuxfoundation.org, kishon@ti.com
Subject: Re: [PATCH] usb: cdns3: Enable TDL_CHK only for OUT ep
Date: Sat, 22 May 2021 18:09:13 +0800 [thread overview]
Message-ID: <20210522100913.GB12415@b29397-desktop> (raw)
In-Reply-To: <1621263912-13175-1-git-send-email-sparmar@cadence.com>
On 21-05-17 17:05:12, Sanket Parmar wrote:
> ZLP gets stuck if TDL_CHK bit is set and TDL_FROM_TRB is used
> as TDL source for IN endpoints. To fix it, TDL_CHK is only
> enabled for OUT endpoints.
>
> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
> Reported-by: Aswath Govindraju <a-govindraju@ti.com>
> Signed-off-by: Sanket Parmar <sparmar@cadence.com>
> ---
> drivers/usb/cdns3/cdns3-gadget.c | 8 +++-----
> 1 files changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
> index 105855a..f3c0276 100644
> --- a/drivers/usb/cdns3/cdns3-gadget.c
> +++ b/drivers/usb/cdns3/cdns3-gadget.c
> @@ -2007,7 +2007,7 @@ static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
> else
> mask = BIT(priv_ep->num);
>
> - if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
> + if (priv_ep->type != USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) {
> cdns3_set_register_bit(®s->tdl_from_trb, mask);
> cdns3_set_register_bit(®s->tdl_beh, mask);
> cdns3_set_register_bit(®s->tdl_beh2, mask);
> @@ -2046,15 +2046,13 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable)
> case USB_ENDPOINT_XFER_INT:
> ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
>
> - if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
> - priv_dev->dev_ver > DEV_VER_V2)
> + if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
> ep_cfg |= EP_CFG_TDL_CHK;
> break;
> case USB_ENDPOINT_XFER_BULK:
> ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
>
> - if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
> - priv_dev->dev_ver > DEV_VER_V2)
> + if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
> ep_cfg |= EP_CFG_TDL_CHK;
> break;
> default:
> --
Sanket & Pawel, please confirm this behaviour could apply for DEV_VER_V3,
that is TDL_CHK can't be used for bulk in for DEV_VER_V3?
--
Thanks,
Peter Chen
next prev parent reply other threads:[~2021-05-22 10:09 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-17 15:05 [PATCH] usb: cdns3: Enable TDL_CHK only for OUT ep Sanket Parmar
2021-05-22 10:09 ` Peter Chen [this message]
2021-05-24 5:39 ` Sanket Parmar
2021-05-26 15:00 ` Aswath Govindraju
2021-05-27 1:23 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210522100913.GB12415@b29397-desktop \
--to=peter.chen@kernel.org \
--cc=a-govindraju@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@ti.com \
--cc=kurahul@cadence.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=pawell@cadence.com \
--cc=sparmar@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox