From: Johan Hovold <johan@kernel.org>
To: Ian Abbott <abbotti@mev.co.uk>,
H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan@kernel.org>,
stable@vger.kernel.org
Subject: [PATCH 3/5] comedi: vmk80xx: fix transfer-buffer overflows
Date: Mon, 25 Oct 2021 13:45:30 +0200 [thread overview]
Message-ID: <20211025114532.4599-4-johan@kernel.org> (raw)
In-Reply-To: <20211025114532.4599-1-johan@kernel.org>
The driver uses endpoint-sized USB transfer buffers but up until
recently had no sanity checks on the sizes.
Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize
of usb endpoints found") inadvertently fixed NULL-pointer dereferences
when accessing the transfer buffers in case a malicious device has a
zero wMaxPacketSize.
Make sure to allocate buffers large enough to handle also the other
accesses that are done without a size check (e.g. byte 18 in
vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond
the buffers, for example, when doing descriptor fuzzing.
The original driver was for a low-speed device with 8-byte buffers.
Support was later added for a device that uses bulk transfers and is
presumably a full-speed device with a maximum 64-byte wMaxPacketSize.
Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc: stable@vger.kernel.org # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/comedi/drivers/vmk80xx.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/comedi/drivers/vmk80xx.c b/drivers/comedi/drivers/vmk80xx.c
index 9f920819cd74..f2c1572d0cd7 100644
--- a/drivers/comedi/drivers/vmk80xx.c
+++ b/drivers/comedi/drivers/vmk80xx.c
@@ -90,6 +90,8 @@ enum {
#define IC3_VERSION BIT(0)
#define IC6_VERSION BIT(1)
+#define MIN_BUF_SIZE 64
+
enum vmk80xx_model {
VMK8055_MODEL,
VMK8061_MODEL
@@ -678,12 +680,12 @@ static int vmk80xx_alloc_usb_buffers(struct comedi_device *dev)
struct vmk80xx_private *devpriv = dev->private;
size_t size;
- size = usb_endpoint_maxp(devpriv->ep_rx);
+ size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE);
devpriv->usb_rx_buf = kzalloc(size, GFP_KERNEL);
if (!devpriv->usb_rx_buf)
return -ENOMEM;
- size = usb_endpoint_maxp(devpriv->ep_tx);
+ size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE);
devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL);
if (!devpriv->usb_tx_buf)
return -ENOMEM;
--
2.32.0
next prev parent reply other threads:[~2021-10-25 11:46 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-25 11:45 [PATCH 0/5] comedi: misc fixes Johan Hovold
2021-10-25 11:45 ` [PATCH 1/5] comedi: ni_usb6501: fix NULL-deref in command paths Johan Hovold
2021-10-26 14:12 ` Ian Abbott
2021-10-27 8:54 ` Johan Hovold
2021-10-25 11:45 ` [PATCH 2/5] comedi: dt9812: fix DMA buffers on stack Johan Hovold
2021-10-26 14:27 ` Ian Abbott
2021-10-27 9:05 ` Johan Hovold
2021-10-25 11:45 ` Johan Hovold [this message]
2021-10-26 14:32 ` [PATCH 3/5] comedi: vmk80xx: fix transfer-buffer overflows Ian Abbott
2021-10-25 11:45 ` [PATCH 4/5] comedi: vmk80xx: fix bulk-buffer overflow Johan Hovold
2021-10-26 14:34 ` Ian Abbott
2021-10-25 11:45 ` [PATCH 5/5] comedi: vmk80xx: fix bulk and interrupt message timeouts Johan Hovold
2021-10-26 14:35 ` Ian Abbott
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211025114532.4599-4-johan@kernel.org \
--to=johan@kernel.org \
--cc=abbotti@mev.co.uk \
--cc=gregkh@linuxfoundation.org \
--cc=hsweeten@visionengravers.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).