linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Johan Hovold <johan@kernel.org>
Cc: Marc Ferland <ferlandm@amotus.ca>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] gnss: usb: add support for Sierra Wireless XM1210
Date: Mon, 20 Dec 2021 12:19:01 +0100	[thread overview]
Message-ID: <20211220111901.23206-3-johan@kernel.org> (raw)
In-Reply-To: <20211220111901.23206-1-johan@kernel.org>

Add support for the USB interface of the Sierra Wireless XM1210
receiver.

Note that the device only supports NMEA.

Bus 002 Device 003: ID 1199:b000 Sierra Wireless, Inc. Sierra Wireless_GNSS
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x1199 Sierra Wireless, Inc.
  idProduct          0xb000
  bcdDevice            0.01
  iManufacturer           1 Sierra-wireless
  iProduct                2 Sierra Wireless_GNSS
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0020
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower               50mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         0
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval             255
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval             255
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0001
  Self Powered

Reported-by: Marc Ferland <ferlandm@amotus.ca>
Link: https://lore.kernel.org/r/20211027200223.72701-1-ferlandm@amotus.ca
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/gnss/usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gnss/usb.c b/drivers/gnss/usb.c
index 5c0251034def..792235a688ea 100644
--- a/drivers/gnss/usb.c
+++ b/drivers/gnss/usb.c
@@ -17,6 +17,7 @@
 #define GNSS_USB_WRITE_TIMEOUT	1000
 
 static const struct usb_device_id gnss_usb_id_table[] = {
+	{ USB_DEVICE(0x1199, 0xb000) },		/* Sierra Wireless XM1210 */
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, gnss_usb_id_table);
-- 
2.32.0


  parent reply	other threads:[~2021-12-20 11:19 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-20 11:18 [PATCH 0/2] gnss: add USB support Johan Hovold
2021-12-20 11:19 ` [PATCH 1/2] " Johan Hovold
2021-12-20 12:49   ` Oliver Neukum
2021-12-20 13:25     ` Johan Hovold
2021-12-20 11:19 ` Johan Hovold [this message]
2021-12-20 19:04   ` [PATCH 2/2] gnss: usb: add support for Sierra Wireless XM1210 Marc Ferland
2021-12-22 14:46     ` Johan Hovold
2021-12-20 12:15 ` [PATCH 0/2] gnss: add USB support Greg KH
2021-12-20 13:26   ` Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211220111901.23206-3-johan@kernel.org \
    --to=johan@kernel.org \
    --cc=ferlandm@amotus.ca \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).