From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 4/9] xhci: dbc: Don't call dbc_tty_init() on every dbc tty probe
Date: Wed, 16 Feb 2022 11:09:33 +0200 [thread overview]
Message-ID: <20220216090938.1260899-5-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20220216090938.1260899-1-mathias.nyman@linux.intel.com>
The current workaround to call the dbc_tty_init() in probe is
not working in case we have several xhci devices with dbc enabled.
dbc_tty_init() should be called only once by a module init call when
module is loaded.
until dbgtty is its own module call dbc_tty_init() from xhci
module init call.
Same is true for unloading and dbc_tty_exit()
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-dbgcap.c | 10 ++++++++++
drivers/usb/host/xhci-dbgcap.h | 12 +++++++++++-
drivers/usb/host/xhci-dbgtty.c | 26 +++++++-------------------
drivers/usb/host/xhci.c | 2 ++
4 files changed, 30 insertions(+), 20 deletions(-)
diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index 46c8f3c187f7..e61155fa6379 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -1087,3 +1087,13 @@ int xhci_dbc_resume(struct xhci_hcd *xhci)
return ret;
}
#endif /* CONFIG_PM */
+
+int xhci_dbc_init(void)
+{
+ return dbc_tty_init();
+}
+
+void xhci_dbc_exit(void)
+{
+ dbc_tty_exit();
+}
diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
index 8b5b363a0719..5f3304a06591 100644
--- a/drivers/usb/host/xhci-dbgcap.h
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -196,6 +196,10 @@ static inline struct dbc_ep *get_out_ep(struct xhci_dbc *dbc)
#ifdef CONFIG_USB_XHCI_DBGCAP
int xhci_create_dbc_dev(struct xhci_hcd *xhci);
void xhci_remove_dbc_dev(struct xhci_hcd *xhci);
+int xhci_dbc_init(void);
+void xhci_dbc_exit(void);
+int dbc_tty_init(void);
+void dbc_tty_exit(void);
int xhci_dbc_tty_probe(struct device *dev, void __iomem *res, struct xhci_hcd *xhci);
void xhci_dbc_tty_remove(struct xhci_dbc *dbc);
struct xhci_dbc *xhci_alloc_dbc(struct device *dev, void __iomem *res,
@@ -219,7 +223,13 @@ static inline int xhci_create_dbc_dev(struct xhci_hcd *xhci)
static inline void xhci_remove_dbc_dev(struct xhci_hcd *xhci)
{
}
-
+static inline int xhci_dbc_init(void)
+{
+ return 0;
+}
+static inline void xhci_dbc_exit(void)
+{
+}
static inline int xhci_dbc_suspend(struct xhci_hcd *xhci)
{
return 0;
diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c
index 18bcc96853ae..ad1db371e38d 100644
--- a/drivers/usb/host/xhci-dbgtty.c
+++ b/drivers/usb/host/xhci-dbgtty.c
@@ -14,9 +14,6 @@
#include "xhci.h"
#include "xhci-dbgcap.h"
-static int dbc_tty_init(void);
-static void dbc_tty_exit(void);
-
static struct tty_driver *dbc_tty_driver;
static inline struct dbc_port *dbc_to_port(struct xhci_dbc *dbc)
@@ -474,16 +471,12 @@ int xhci_dbc_tty_probe(struct device *dev, void __iomem *base, struct xhci_hcd *
struct dbc_port *port;
int status;
- /* dbc_tty_init will be called by module init() in the future */
- status = dbc_tty_init();
- if (status)
- return status;
+ if (!dbc_tty_driver)
+ return -ENODEV; // MATTU FIXME is this ok??
port = kzalloc(sizeof(*port), GFP_KERNEL);
- if (!port) {
- status = -ENOMEM;
- goto out;
- }
+ if (!port)
+ return -ENOMEM;
dbc_tty_driver->driver_state = port;
@@ -501,9 +494,7 @@ int xhci_dbc_tty_probe(struct device *dev, void __iomem *base, struct xhci_hcd *
return 0;
out2:
kfree(port);
-out:
- /* dbc_tty_exit will be called by module_exit() in the future */
- dbc_tty_exit();
+
return status;
}
@@ -517,12 +508,9 @@ void xhci_dbc_tty_remove(struct xhci_dbc *dbc)
xhci_dbc_remove(dbc);
kfree(port);
-
- /* dbc_tty_exit will be called by module_exit() in the future */
- dbc_tty_exit();
}
-static int dbc_tty_init(void)
+int dbc_tty_init(void)
{
int ret;
@@ -552,7 +540,7 @@ static int dbc_tty_init(void)
return ret;
}
-static void dbc_tty_exit(void)
+void dbc_tty_exit(void)
{
if (dbc_tty_driver) {
tty_unregister_driver(dbc_tty_driver);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ab1b5ff3fc99..17a561abfab7 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5495,6 +5495,7 @@ static int __init xhci_hcd_init(void)
return -ENODEV;
xhci_debugfs_create_root();
+ xhci_dbc_init();
return 0;
}
@@ -5506,6 +5507,7 @@ static int __init xhci_hcd_init(void)
static void __exit xhci_hcd_fini(void)
{
xhci_debugfs_remove_root();
+ xhci_dbc_exit();
}
module_init(xhci_hcd_init);
--
2.25.1
next prev parent reply other threads:[~2022-02-16 9:08 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-16 9:09 [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
2022-02-16 9:09 ` [PATCH 1/9] xhci: dbc: refactor xhci_dbc_init() Mathias Nyman
2022-02-16 9:09 ` [PATCH 2/9] xhci: dbc: create and remove dbc structure in dbgtty driver Mathias Nyman
2022-02-16 9:09 ` [PATCH 3/9] xhci: dbc: Rename xhci_dbc_init and xhci_dbc_exit Mathias Nyman
2022-02-16 9:09 ` Mathias Nyman [this message]
2022-02-16 9:09 ` [PATCH 5/9] xhci: dbgtty: use IDR to support several dbc instances Mathias Nyman
2022-02-16 9:09 ` [PATCH 6/9] xhci: Allocate separate command structures for each LPM command Mathias Nyman
2022-02-16 9:09 ` [PATCH 7/9] usb: remove Link Powermanagement (LPM) disable before port reset Mathias Nyman
2022-02-16 9:09 ` [PATCH 8/9] usb: host: xhci: drop redundant checks Mathias Nyman
2022-02-16 9:09 ` [PATCH 9/9] usb: xhci: fix minmax.cocci warnings Mathias Nyman
2022-02-16 9:21 ` [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220216090938.1260899-5-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox