[PATCH v2 00/11] enable usb support on rk356x

[PATCH v2 00/11] enable usb support on rk356x

[Peter Geis]

Good Morning,

This is my patch series that I have maintained out of tree until the
combophy driver landed.

Patch 1 fixes the grf dt binding from the combophy merge.
Patches 2 and 3 add the dt bindings for the grf changes necessary for
this series.
Patch 4 adds support to the grf driver to set the rk3566 otg clock
source.
Patch 5 is a downstream patch ported forward to shut down the usb3 clock
when the controller is operating in usb2 mode.
Patches 6, 7, and 8 clean up the dwc3-of-simple driver, allow the use of
of-match-data, and add the compatible for the rk3568.
Patch 9 adds the dwc3 nodes to the rk356x device tree includes.
Patch 10 enables the dwc3 nodes on the Quartz64 Model A.
Patch 11 enables the dwc3 nodes on the rk3568-evb.

Please review and apply.

Very Respectfully,
Peter Geis

Changelog:
v2:
- Add a dt-bindings fix for grf.yaml
- Unify the reset names.
- Constrain the force usb2 clock dwc3 patch to only supported variants of
the ip.
- Change dwc3-of-simple to support of-match-data.
- Drop the PCLK-PIPE clk.
- Rename the usb nodes to be more friendly.
- Add the rk3568-evb enable patch.

Bin Yang (1):
  usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode

Michael Riesch (1):
  arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10

Peter Geis (9):
  dt-bindings: soc: grf: fix rk3568 usb definitions
  dt-bindings: soc: grf: add rk3566-pipe-grf compatible
  dt-bindings: usb: dwc3: add description for rk3568
  soc: rockchip: set dwc3 clock for rk3566
  usb: dwc3: reorder dwc-of-simple compatibles
  usb: dwc3: convert dwc3-of-simple to use match-data
  usb: dwc3: add rk3568 dwc3 support
  arm64: dts: rockchip: add rk356x dwc3 usb3 nodes
  arm64: dts: rockchip: enable dwc3 on quartz64-a

 .../devicetree/bindings/soc/rockchip/grf.yaml |  5 +-
 .../bindings/usb/rockchip,dwc3.yaml           |  2 +
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 37 +++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3566.dtsi      | 12 +++++
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 46 +++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      |  9 ++++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 45 +++++++++++++++++-
 drivers/soc/rockchip/grf.c                    | 17 +++++++
 drivers/usb/dwc3/core.c                       |  5 ++
 drivers/usb/dwc3/core.h                       |  1 +
 drivers/usb/dwc3/dwc3-of-simple.c             | 43 +++++++++++++----
 11 files changed, 210 insertions(+), 12 deletions(-)

-- 
2.25.1

[PATCH v2 03/11] dt-bindings: usb: dwc3: add description for rk3568

[Peter Geis]

The rk3568 dwc3 controllers are backwards compatible with the rk3399.
Add the device tree description for it.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
index 04077f2d7faf..b3798d94d2fd 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
@@ -30,6 +30,7 @@ select:
         enum:
           - rockchip,rk3328-dwc3
           - rockchip,rk3399-dwc3
+          - rockchip,rk3568-dwc3
   required:
     - compatible
 
@@ -39,6 +40,7 @@ properties:
       - enum:
           - rockchip,rk3328-dwc3
           - rockchip,rk3399-dwc3
+          - rockchip,rk3568-dwc3
       - const: snps,dwc3
 
   reg:
-- 
2.25.1

[PATCH v2 05/11] usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode

[Peter Geis]

From: Bin Yang <yangbin@rock-chips.com>

In the 3.0 device core, if the core is programmed to operate in
2.0 only, then setting the GUCTL1.DEV_FORCE_20_CLK_FOR_30_CLK makes
the internal 2.0(utmi/ulpi) clock to be routed as the 3.0 (pipe)
clock. Enabling this feature allows the pipe3 clock to be not-running
when forcibly operating in 2.0 device mode.

Signed-off-by: Bin Yang <yangbin@rock-chips.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 drivers/usb/dwc3/core.c | 5 +++++
 drivers/usb/dwc3/core.h | 1 +
 2 files changed, 6 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 18adddfba3da..416d83a055fe 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1167,6 +1167,11 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		if (dwc->parkmode_disable_ss_quirk)
 			reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;
 
+		if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY) &&
+		    (dwc->maximum_speed == USB_SPEED_HIGH ||
+		     dwc->maximum_speed == USB_SPEED_FULL))
+			reg |= DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK;
+
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index eb9c1efced05..ea3ca04406bb 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -259,6 +259,7 @@
 /* Global User Control 1 Register */
 #define DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT	BIT(31)
 #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS	BIT(28)
+#define DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK	BIT(26)
 #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW		BIT(24)
 #define DWC3_GUCTL1_PARKMODE_DISABLE_SS		BIT(17)
 
-- 
2.25.1

[PATCH v2 06/11] usb: dwc3: reorder dwc-of-simple compatibles

[Peter Geis]

The dwc3-of-simple driver is getting rather disorganized with the new
inclusions.
Reorder the dwc3-of-simple compatibles to be alphabetical.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 drivers/usb/dwc3/dwc3-of-simple.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 71fd620c5161..9dc6295df6b1 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -171,12 +171,12 @@ static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
 };
 
 static const struct of_device_id of_dwc3_simple_match[] = {
-	{ .compatible = "rockchip,rk3399-dwc3" },
-	{ .compatible = "cavium,octeon-7130-usb-uctl" },
-	{ .compatible = "sprd,sc9860-dwc3" },
 	{ .compatible = "allwinner,sun50i-h6-dwc3" },
+	{ .compatible = "cavium,octeon-7130-usb-uctl" },
 	{ .compatible = "hisilicon,hi3670-dwc3" },
 	{ .compatible = "intel,keembay-dwc3" },
+	{ .compatible = "rockchip,rk3399-dwc3" },
+	{ .compatible = "sprd,sc9860-dwc3" },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);
-- 
2.25.1

[PATCH v2 07/11] usb: dwc3: convert dwc3-of-simple to use match-data

[Peter Geis]

The upcoming support for rk3568 will reuse data from rk3399.
Instead of adding a bunch of of_device_is_compatible as we add support
for new devices, lets get ahead of the problem and use of_match_data
instead.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 drivers/usb/dwc3/dwc3-of-simple.c | 39 ++++++++++++++++++++++++-------
 1 file changed, 30 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 9dc6295df6b1..57ba9427ad74 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -30,12 +30,16 @@ struct dwc3_of_simple {
 	bool			need_reset;
 };
 
+struct dwc3_of_simple_data {
+	bool			need_reset;
+};
+
 static int dwc3_of_simple_probe(struct platform_device *pdev)
 {
 	struct dwc3_of_simple	*simple;
 	struct device		*dev = &pdev->dev;
 	struct device_node	*np = dev->of_node;
-
+	const struct dwc3_of_simple_data *data = of_device_get_match_data(dev);
 	int			ret;
 
 	simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL);
@@ -49,8 +53,8 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
 	 * Some controllers need to toggle the usb3-otg reset before trying to
 	 * initialize the PHY, otherwise the PHY times out.
 	 */
-	if (of_device_is_compatible(np, "rockchip,rk3399-dwc3"))
-		simple->need_reset = true;
+	if (data->need_reset)
+		simple->need_reset = data->need_reset;
 
 	simple->resets = of_reset_control_array_get(np, false, true,
 						    true);
@@ -170,13 +174,30 @@ static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
 			dwc3_of_simple_runtime_resume, NULL)
 };
 
+static const struct dwc3_of_simple_data dwc3_of_simple_data_rk3399 = {
+	.need_reset = true,
+};
+
 static const struct of_device_id of_dwc3_simple_match[] = {
-	{ .compatible = "allwinner,sun50i-h6-dwc3" },
-	{ .compatible = "cavium,octeon-7130-usb-uctl" },
-	{ .compatible = "hisilicon,hi3670-dwc3" },
-	{ .compatible = "intel,keembay-dwc3" },
-	{ .compatible = "rockchip,rk3399-dwc3" },
-	{ .compatible = "sprd,sc9860-dwc3" },
+	{
+		.compatible = "allwinner,sun50i-h6-dwc3",
+	},
+	{
+		.compatible = "cavium,octeon-7130-usb-uctl",
+	},
+	{
+		.compatible = "hisilicon,hi3670-dwc3",
+	},
+	{
+		.compatible = "intel,keembay-dwc3",
+	},
+	{
+		.compatible = "rockchip,rk3399-dwc3",
+		.data = &dwc3_of_simple_data_rk3399,
+	},
+	{
+		.compatible = "sprd,sc9860-dwc3",
+	},
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);
-- 
2.25.1

[PATCH v2 08/11] usb: dwc3: add rk3568 dwc3 support

[Peter Geis]

The rk3568 dwc3 controller is backwards compatible with the rk3399 dwc3
controller.
Add support for it to the dwc3-of-simple driver.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 drivers/usb/dwc3/dwc3-of-simple.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 57ba9427ad74..d9d1c5bfac3f 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -195,6 +195,10 @@ static const struct of_device_id of_dwc3_simple_match[] = {
 		.compatible = "rockchip,rk3399-dwc3",
 		.data = &dwc3_of_simple_data_rk3399,
 	},
+	{
+		.compatible = "rockchip,rk3568-dwc3",
+		.data = &dwc3_of_simple_data_rk3399,
+	},
 	{
 		.compatible = "sprd,sc9860-dwc3",
 	},
-- 
2.25.1

Re: [PATCH v2 08/11] usb: dwc3: add rk3568 dwc3 support

[Johan Jonker]

Hi Peter,

See comments by rob+dt:

https://lore.kernel.org/linux-rockchip/CAL_JsqJwNdUfoYM8SZmOgMG9iAyZkJ4-kzjjiDDm_mdmghTEOA@mail.gmail.com/

> Presumably you are getting lucky here (with link order). The kernel
> has no logic to decide which driver to bind to if there are 2 matching
> drivers.

Due to the fall back string you make a mess with two drivers.
Don't use dwc3-of-simple.c
(only for rk3399 and legacy support. Not for new SoCs),
because core.c has now reset support.
You are creating a race which driver get probed first.
Handle your quirks in core.

Johan

On 2/26/22 19:41, Peter Geis wrote:
> The rk3568 dwc3 controller is backwards compatible with the rk3399 dwc3
> controller.
> Add support for it to the dwc3-of-simple driver.
> 
> Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> ---
>  drivers/usb/dwc3/dwc3-of-simple.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
> index 57ba9427ad74..d9d1c5bfac3f 100644
> --- a/drivers/usb/dwc3/dwc3-of-simple.c
> +++ b/drivers/usb/dwc3/dwc3-of-simple.c
> @@ -195,6 +195,10 @@ static const struct of_device_id of_dwc3_simple_match[] = {
>  		.compatible = "rockchip,rk3399-dwc3",
>  		.data = &dwc3_of_simple_data_rk3399,
>  	},
> +	{
> +		.compatible = "rockchip,rk3568-dwc3",
> +		.data = &dwc3_of_simple_data_rk3399,
> +	},
>  	{
>  		.compatible = "sprd,sc9860-dwc3",
>  	},

Re: [PATCH v2 08/11] usb: dwc3: add rk3568 dwc3 support

[Peter Geis]

On Sat, Feb 26, 2022 at 4:43 PM Johan Jonker <jbx6244@gmail.com> wrote:
>
> Hi Peter,
>
> See comments by rob+dt:
>
> https://lore.kernel.org/linux-rockchip/CAL_JsqJwNdUfoYM8SZmOgMG9iAyZkJ4-kzjjiDDm_mdmghTEOA@mail.gmail.com/
>
> > Presumably you are getting lucky here (with link order). The kernel
> > has no logic to decide which driver to bind to if there are 2 matching
> > drivers.
>
> Due to the fall back string you make a mess with two drivers.
> Don't use dwc3-of-simple.c
> (only for rk3399 and legacy support. Not for new SoCs),
> because core.c has now reset support.
> You are creating a race which driver get probed first.
> Handle your quirks in core.

I finally understood what you were trying to get at here.
After some testing, it seems the core driver handles everything we need now.
This makes me want to revisit the rk3399 support.

Thanks!

>
> Johan
>
> On 2/26/22 19:41, Peter Geis wrote:
> > The rk3568 dwc3 controller is backwards compatible with the rk3399 dwc3
> > controller.
> > Add support for it to the dwc3-of-simple driver.
> >
> > Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> > ---
> >  drivers/usb/dwc3/dwc3-of-simple.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
> > index 57ba9427ad74..d9d1c5bfac3f 100644
> > --- a/drivers/usb/dwc3/dwc3-of-simple.c
> > +++ b/drivers/usb/dwc3/dwc3-of-simple.c
> > @@ -195,6 +195,10 @@ static const struct of_device_id of_dwc3_simple_match[] = {
> >               .compatible = "rockchip,rk3399-dwc3",
> >               .data = &dwc3_of_simple_data_rk3399,
> >       },
> > +     {
> > +             .compatible = "rockchip,rk3568-dwc3",
> > +             .data = &dwc3_of_simple_data_rk3399,
> > +     },
> >       {
> >               .compatible = "sprd,sc9860-dwc3",
> >       },

Re: [PATCH v2 03/11] dt-bindings: usb: dwc3: add description for rk3568

[Rob Herring]

On Sat, 26 Feb 2022 13:41:39 -0500, Peter Geis wrote:
> The rk3568 dwc3 controllers are backwards compatible with the rk3399.
> Add the device tree description for it.
> 
> Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> ---
>  Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>