Re: [PATCH v13 2/3] dt-bindings: usb: Add analogix anx7411 PD binding

[Xin Ji <xji@analogixsemi.com>]

Hi Krzysztof Kozlowski, thanks for your comment, I'll change it in the
next serial.

Thanks,
Xin

On Tue, Jul 05, 2022 at 04:27:28PM +0200, Krzysztof Kozlowski wrote:
> On 05/07/2022 07:36, Xin Ji wrote:
> > Add analogix PD chip anx7411 device binding
> > 
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > Signed-off-by: Xin Ji <xji@analogixsemi.com>
> > 
> > ---
> > v12 -> v13 :
> >     1. Drop the quotes for "$id" and "$schema"
> >     2. Remove "allOf" label
> >     3. Change node name from "i2c1" to "i2c"
> >     4. Change node name from "typec" to "usb-typec"
> > ---
> >  .../bindings/usb/analogix,anx7411.yaml        | 76 +++++++++++++++++++
> >  1 file changed, 76 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
> > new file mode 100644
> > index 000000000000..57429864d499
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
> > @@ -0,0 +1,76 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fusb%2Fanalogix%2Canx7411.yaml%23&amp;data=05%7C01%7Cxji%40analogixsemi.com%7Cbb10f7b74a6d4924d7a108da5e928029%7Cb099b0b4f26c4cf59a0fd5be9acab205%7C0%7C0%7C637926280579332615%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=JfpqaGXa6TUI7iOzxcxOuSaQaMHdoWxqH1fTJCuHi%2Fs%3D&amp;reserved=0
> > +$schema: https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&amp;data=05%7C01%7Cxji%40analogixsemi.com%7Cbb10f7b74a6d4924d7a108da5e928029%7Cb099b0b4f26c4cf59a0fd5be9acab205%7C0%7C0%7C637926280579332615%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=oK3lhKtiDat%2Bm1u7%2BacAImLuxsQ%2BkYTV9TCtZAweK2A%3D&amp;reserved=0
> > +
> > +title: Analogix ANX7411 Type-C controller bindings
> > +
> > +maintainers:
> > +  - Xin Ji <xji@analogixsemi.com>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - analogix,anx7411
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  connector:
> > +    type: object
> > +    $ref: ../connector/usb-connector.yaml
> > +    description:
> > +      Properties for usb c connector.
> > +
> > +    properties:
> > +      compatible:
> > +        const: usb-c-connector
> > +
> > +      power-role: true
> > +
> > +      data-role: true
> > +
> > +      try-power-role: true
> > +
> > +    required:
> > +      - compatible
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - connector
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        usb-typec: anx7411@2C {
> 
> 1. node name is still not correct.
> 2. lowercase hex, so @2c.
OK
> 
> > +            compatible = "analogix,anx7411";
> > +            reg = <0x2C>;
> 
> lowercase hex
OK
> 
> > +            interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
> > +            interrupt-parent = <&gpio0>;
> > +
> > +            typec_con: connector {
> > +                compatible = "usb-c-connector";
> > +                power-role = "dual";
> > +                data-role = "dual";
> > +                try-power-role = "source";
> 
> The DT schema requires ports property and just "port" is not accepted.
OK
> 
> > +
> > +                port {
> > +                    typec_con_ep: endpoint {
> > +                        remote-endpoint = <&usbotg_hs_ep>;
> > +                    };
> > +                };
> > +            };
> > +        };
> > +    };
> > +...
> 
> 
> Best regards,
> Krzysztof