From: Gene Chen <gene.chen.richtek@gmail.com>
To: linux@roeck-us.net, heikki.krogerus@linux.intel.com,
gregkh@linuxfoundation.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, gene_chen@richtek.com,
cy_huang@richtek.com
Subject: [PATCH v3 5/7] usb: typec: tcpci_rt1711h: Add compatible id with rt1715
Date: Mon, 1 Aug 2022 18:14:45 +0800 [thread overview]
Message-ID: <20220801101447.86207-6-gene.chen.richtek@gmail.com> (raw)
In-Reply-To: <20220801101447.86207-1-gene.chen.richtek@gmail.com>
From: Gene Chen <gene_chen@richtek.com>
Add compatible id with rt1715, and add initial setting for
specific support PD30 command.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
drivers/usb/typec/tcpm/tcpci_rt1711h.c | 43 ++++++++++++++++++++------
1 file changed, 34 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
index 33d8ea95b7c1..da35dd3e8a59 100644
--- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
+++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
@@ -19,6 +19,8 @@
#define RT1711H_VID 0x29CF
#define RT1711H_PID 0x1711
+#define RT1711H_DID 0x2171
+#define RT1715_DID 0x2173
#define RT1711H_PHYCTRL1 0x80
#define RT1711H_PHYCTRL2 0x81
@@ -30,6 +32,7 @@
(((ck300) << 7) | ((ship_off) << 5) | \
((auto_idle) << 3) | ((tout) & 0x07))
#define RT1711H_AUTOIDLEEN BIT(3)
+#define RT1711H_ENEXTMSG BIT(4)
#define RT1711H_RTCTRL11 0x9E
@@ -48,6 +51,7 @@ struct rt1711h_chip {
struct device *dev;
struct regulator *vbus;
bool src_en;
+ u16 did;
};
static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
@@ -84,8 +88,9 @@ static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata)
static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
{
- int ret;
struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+ struct regmap *regmap = chip->data.regmap;
+ int ret;
/* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */
ret = rt1711h_write8(chip, RT1711H_RTCTRL8,
@@ -93,6 +98,14 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
if (ret < 0)
return ret;
+ /* Enable PD30 extended message for RT1715 */
+ if (chip->did == RT1715_DID) {
+ ret = regmap_update_bits(regmap, RT1711H_RTCTRL8,
+ RT1711H_ENEXTMSG, RT1711H_ENEXTMSG);
+ if (ret < 0)
+ return ret;
+ }
+
/* I2C reset : (val + 1) * 12.5ms */
ret = rt1711h_write8(chip, RT1711H_RTCTRL11,
RT1711H_RTCTRL11_SET(1, 0x0F));
@@ -230,7 +243,7 @@ static int rt1711h_sw_reset(struct rt1711h_chip *chip)
return 0;
}
-static int rt1711h_check_revision(struct i2c_client *i2c)
+static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *chip)
{
int ret;
@@ -248,7 +261,15 @@ static int rt1711h_check_revision(struct i2c_client *i2c)
dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret);
return -ENODEV;
}
- return 0;
+ ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV);
+ if (ret < 0)
+ return ret;
+ if (ret != chip->did) {
+ dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret);
+ return -ENODEV;
+ }
+ dev_dbg(&i2c->dev, "did is 0x%04x\n", ret);
+ return ret;
}
static int rt1711h_probe(struct i2c_client *client,
@@ -257,16 +278,18 @@ static int rt1711h_probe(struct i2c_client *client,
int ret;
struct rt1711h_chip *chip;
- ret = rt1711h_check_revision(client);
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->did = (size_t)device_get_match_data(&client->dev);
+
+ ret = rt1711h_check_revision(client, chip);
if (ret < 0) {
dev_err(&client->dev, "check vid/pid fail\n");
return ret;
}
- chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
chip->data.regmap = devm_regmap_init_i2c(client,
&rt1711h_regmap_config);
if (IS_ERR(chip->data.regmap))
@@ -317,13 +340,15 @@ static int rt1711h_remove(struct i2c_client *client)
static const struct i2c_device_id rt1711h_id[] = {
{ "rt1711h", 0 },
+ { "rt1715", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, rt1711h_id);
#ifdef CONFIG_OF
static const struct of_device_id rt1711h_of_match[] = {
- { .compatible = "richtek,rt1711h", },
+ { .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID },
+ { .compatible = "richtek,rt1715", .data = (void *)RT1715_DID },
{},
};
MODULE_DEVICE_TABLE(of, rt1711h_of_match);
--
2.25.1
next prev parent reply other threads:[~2022-08-01 10:27 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-01 10:14 [PATCH v3 0/7] usb: typec: tcpci_rt1711h: Add compatible with rt1715 Gene Chen
2022-08-01 10:14 ` [PATCH v3 1/7] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H Gene Chen
2022-08-01 10:14 ` [PATCH v3 2/7] usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn Gene Chen
2022-08-02 7:57 ` Heikki Krogerus
2022-08-03 6:08 ` Gene Chen
2022-08-01 10:14 ` [PATCH v3 3/7] usb: typec: tcpci_rt1711h: Add regulator support when source vbus Gene Chen
2022-08-02 8:04 ` Heikki Krogerus
2022-08-01 10:14 ` [PATCH v3 4/7] usb: typec: tcpci_rt1711h: Add initial phy setting Gene Chen
2022-08-02 8:19 ` Heikki Krogerus
2022-08-02 8:58 ` Guenter Roeck
2022-08-03 6:20 ` Gene Chen
2022-08-01 10:14 ` Gene Chen [this message]
2022-08-02 8:28 ` [PATCH v3 5/7] usb: typec: tcpci_rt1711h: Add compatible id with rt1715 Heikki Krogerus
2022-08-01 10:14 ` [PATCH v3 6/7] usb: typec: tcpci: Move function "tcpci_to_typec_cc" to common Gene Chen
2022-08-02 8:32 ` Heikki Krogerus
2022-08-01 10:14 ` [PATCH v3 7/7] usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level Gene Chen
2022-08-02 8:42 ` Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220801101447.86207-6-gene.chen.richtek@gmail.com \
--to=gene.chen.richtek@gmail.com \
--cc=cy_huang@richtek.com \
--cc=devicetree@vger.kernel.org \
--cc=gene_chen@richtek.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).