From: Xu Yang <xu.yang_2@nxp.com>
To: peter.chen@kernel.org
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
linux-imx@nxp.com, jun.li@nxp.com, xu.yang_2@nxp.com
Subject: [PATCH v2 2/3] usb: chipidea: core: fix possible concurrent when switch role
Date: Wed, 30 Nov 2022 16:12:30 +0800 [thread overview]
Message-ID: <20221130081231.3127369-2-xu.yang_2@nxp.com> (raw)
In-Reply-To: <20221130081231.3127369-1-xu.yang_2@nxp.com>
The user may call role_store() when driver is handling
ci_handle_id_switch() which is triggerred by otg event or power lost
event. Unfortunately, the controller may go into chaos in this case.
Fix this by protecting it with mutex lock.
Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
changes since v1:
- modify description for mutex member
- wrap role variable in ci_handle_id_switch() too
---
drivers/usb/chipidea/ci.h | 2 ++
drivers/usb/chipidea/core.c | 8 +++++++-
drivers/usb/chipidea/otg.c | 5 ++++-
3 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 005c67cb3afb..f210b7489fd5 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -208,6 +208,7 @@ struct hw_bank {
* @in_lpm: if the core in low power mode
* @wakeup_int: if wakeup interrupt occur
* @rev: The revision number for controller
+ * @mutex: protect code from concorrent running when doing role switch
*/
struct ci_hdrc {
struct device *dev;
@@ -260,6 +261,7 @@ struct ci_hdrc {
bool in_lpm;
bool wakeup_int;
enum ci_revision rev;
+ struct mutex mutex;
};
static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index fcb175b22188..d7efde30d59f 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -987,8 +987,12 @@ static ssize_t role_store(struct device *dev,
if (role == CI_ROLE_END)
return -EINVAL;
- if (role == ci->role)
+ mutex_lock(&ci->mutex);
+
+ if (role == ci->role) {
+ mutex_unlock(&ci->mutex);
return n;
+ }
pm_runtime_get_sync(dev);
disable_irq(ci->irq);
@@ -998,6 +1002,7 @@ static ssize_t role_store(struct device *dev,
ci_handle_vbus_change(ci);
enable_irq(ci->irq);
pm_runtime_put_sync(dev);
+ mutex_unlock(&ci->mutex);
return (ret == 0) ? n : ret;
}
@@ -1033,6 +1038,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
return -ENOMEM;
spin_lock_init(&ci->lock);
+ mutex_init(&ci->mutex);
ci->dev = dev;
ci->platdata = dev_get_platdata(dev);
ci->imx28_write_fix = !!(ci->platdata->flags &
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index 622c3b68aa1e..f5490f2a5b6b 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -167,8 +167,10 @@ static int hw_wait_vbus_lower_bsv(struct ci_hdrc *ci)
void ci_handle_id_switch(struct ci_hdrc *ci)
{
- enum ci_role role = ci_otg_role(ci);
+ enum ci_role role;
+ mutex_lock(&ci->mutex);
+ role = ci_otg_role(ci);
if (role != ci->role) {
dev_dbg(ci->dev, "switching from %s to %s\n",
ci_role(ci)->name, ci->roles[role]->name);
@@ -198,6 +200,7 @@ void ci_handle_id_switch(struct ci_hdrc *ci)
if (role == CI_ROLE_GADGET)
ci_handle_vbus_change(ci);
}
+ mutex_unlock(&ci->mutex);
}
/**
* ci_otg_work - perform otg (vbus/id) event handle
--
2.34.1
next prev parent reply other threads:[~2022-11-30 8:12 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-30 8:12 [PATCH v2 1/3] usb: chipdea: core: don't return -EINVAL if request role is the same with current role Xu Yang
2022-11-30 8:12 ` Xu Yang [this message]
2023-01-30 1:55 ` [PATCH v2 2/3] usb: chipidea: core: fix possible concurrent when switch role Xu Yang
2023-02-10 8:57 ` Peter Chen
2022-11-30 8:12 ` [PATCH v2 3/3] usb: chipidea: debug: remove redundant 'role' debug file Xu Yang
2023-02-10 8:58 ` Peter Chen
2023-02-10 8:55 ` [PATCH v2 1/3] usb: chipdea: core: don't return -EINVAL if request role is the same with current role Peter Chen
2023-03-16 9:57 ` [EXT] " Xu Yang
2023-03-16 11:54 ` gregkh
2023-03-17 2:37 ` Xu Yang
2023-03-17 4:50 ` gregkh
2023-03-17 5:34 ` Xu Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221130081231.3127369-2-xu.yang_2@nxp.com \
--to=xu.yang_2@nxp.com \
--cc=gregkh@linuxfoundation.org \
--cc=jun.li@nxp.com \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=peter.chen@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox